Binding a Springback Visitors Book Part 1 of 3 // Adventures in Bookbinding

Sparky Deal
161 followers
Binding a Springback Visitors Book Part 1 of 3 // Adventures in Bookbinding
#bookbinding #dasbookbinding
Welcome to a new project.
This is going to be a half leather springback, ruled as a visitor's book.
The book will be very similar to this one, but not identical.
It will use the same unfinished sheepskin leather.
It'll use the same Arbor Lave book cloth, but maybe in a different color.
And we'll get to that later.
But the main difference is that it'll be a bit thinner than this book, about two thirds the thickness.
So we'll start by folding the sections.
In the description, there's a link to my website where I'll put the PDFs needed to make the pages.
There'll be three PDFs.
There'll be the one that has the visitor's book title page.
There'll be another one that has a blank on one leaf.
And then the third is, has the visitor's entries on all four pages of the folio.
The main thing with printing them out is to get your printer to flip on the short edge.
I'm using 130 gsm cartridge paper.
It has a nice weight and it has a bit of a tooth to the paper as well.
So it's nice to write on.
I'm doing 4 sheet sections and there'll be 18 sections in total.
And then there'll be the two end papers.
Thanks to the holidays, I'm a bit behind on work and on my videos.
I normally like to have the book finished before I publish the first video on the project, just in case I mess it up
towards the end. So we're living dangerously on this book.
Now, just explain that a little bit.
I've done enough of these books to be confident that I can complete the book, but I often make mistakes during the
filming. One of the mistakes is to forget to hit the record button.
And if I do that in a critical step that involves the text block where I can't go back, then I'm sort of stuck.
And what I normally do is start again and and pick up at my blooper.
Now, of course, I did this on the library book and realized that because the paste papers were one offs, they weren't
going to match. So I ended up just videoing it all from the start again.
Which is a bit frustrating.
And I won't have this option on this project.
So I've folded all the sections.
I'm going to put them in the press overnight.
I'm going to turn half the sections around and so that the spine folds are half on each side.
And I'll give that a really strong nip in the press overnight, which will flatten the text block nicely.
Now we're going to make the end papers.
I won't do a commentary for all of the end paper construction.
I'll just point out a couple of things.
A bit later, when I go to lay down the marble paper, I normally score a line to pitch the marble paper to.
And I forgot to do it and I'd already glued up everything, so I couldn't really go back and do it.
So I just judged it by eye.
That's a common thing to do.
A lot of bookbinders with experience will be able to judge these things by eye without having to measure them.
For instance, I mark the halfway position on these pieces of cloth.
And a lot of people will just judge that by eye.
The edges of the cloth will end up under the marbled paper and the outside white cloth will end up under the
paste down. And usually the other side will be in a stiff leaf, though we're not going to do a stiff leaf for this
book. So as you become more proficient, I think it is a really good idea to start to trust your eye as it's become
trained. It speeds up your work and often the speed of your work actually improves the quality of your work.
This starched calico is actually very stretchy and it's a little bit tricky to work with compared to the the
buckram. And there's a little trick you can use for materials like that for folding it over in that step.
If you've got something that's a bit fragile, you can put a piece of paper behind it and use the paper to fold
something over, such as a thin Japanese tissue, for instance.
I've had a question about the types of cloth that I use for these endpapers.
For the inner joint, I nearly always use Arbolay buckram.
Arbolay is my favorite to work with book cloth.
And for the outside reinforcement, I normally use a much lighter weight material.
In this case, it's starched calico called jacquenette.
I'll put a link to both these materials at Hewitt's in the description.
And I'm pretty sure you can get both of them from Talas in North America as well.
I'll put a sheet of nonwoven polyester fabric in the center and then blotters either side.
And I'll give these endpapers a very light nip, just for 5 minutes.
I don't want to stick them together.
And then I'll hang them up to dry overnight.
Because of the marble paper, they normally end up quite wrinkly.
So I then put them back in the press, usually for a day, and that flattens them out nicely.
I'm going to mark the book up for sewing on three quite heavy linen tapes.
Nothing special about this.
The top kettle, the head kettle stitch about 12 millimeters in, and the tail one 15 millimeters in, just because it
normally requires a little bit more trim space.
The holes for the sewing around the tapes, I'll mark just either side of the tape.
And I'll mark the head there, except I actually made a mistake when I put this block into the press and I've got the
head on the wrong side.
I'll only notice this later.
And I'll put a H at the other end to correct this.
I'll make a little jig for punching the holes like I normally do, and then I'll punch the holes.
I'm going to use Daniel Ibbett's wishbone for reinforcing the kettle stitches.
I won't describe that in detail.
It's in another video that I did just last night.
So I'll put a link to that.
Or you don't have to reinforce the kettle stitches at all.
Really, it's for really heavy books that you'd normally do it, but it's a bit of fun to do.
Trimming the excess coloured off the end sheets makes punching the holes in the end sheets much easier.
When you punch the holes in the end sheets, if the coloured sheets or the decorative paper has a right way up, you
have to make sure you keep track of this so that the front and back are up in the same direction.
For combed marbled papers, the traditional way is to have the comb going down.
To minimize the swell, I'm using a fairly thin linen thread.
This is 25 3, though it's still a very strong linen thread.
I couldn't break this.
The only other thing I'll mention about the end sheets is to remember to sew around the tapes for the end papers so
that you get a continuous line of thread inside the end papers when you open up the book.
In a moment, we'll tip on the first and last sections and the end papers.
Now, in springbacks, it was traditional or common to glue the first sheet of the first section and the outer or inner
sheet of the end paper completely together to form what's called a stiff leaf.
And that's because often in ledges, the first page is the left hand page.
Now, I'd originally planned to do that for this book, but on second thoughts, it is one of the hardest things I've done
in bookbinding to get that end paper down so that it's aligned at the spine and that you don't get any wrinkles in
that stiff sheet.
So I've decided to skip it for this book and we'll do it on a future book.
We'll glue up the spine with PVA, but not over the tapes because we have to round the book first.
So we will glue the spine, trim the fore edge and the head and tail.
Well, actually, this order is we'll glue the spine, trim the fore edge, sprinkle the fore edge, round the book, trim
the head and tail, and then sprinkle the head and tail.
I still haven't got around to getting the blade on my guillotine sharpened while I normally sharpen it myself.
So I'm going to trim the book on the plough.
Since I have a whole video on that, I'm not going to show you using the plough.
So it'll happen by magic.
So I'm going to sprinkle the edges of this book with two colors.
And because of the green in the endpapers, my original plan was to do yellow, then green.
But I'm working on a couple of books at the moment, and I had some blue ink out and I just sort of lost track.
And that blue ink was there.
And without thinking, I ended up using it.
The blue over the yellow has turned out a sort of a greenish color anyway.
So I could still go with the green book cloth that I'd originally planned to.
But now I'm sort of changing my mind about that book cloth anyway.
So at the end of the video, I'm going to show you the colors of cloth that I'm thinking about.
And I'd appreciate some feedback on what color you think I should use to match the endpaper and the edge
sprinkling.
Now, I forgot to hit record before I started with the yellow, so we missed that.
But sprinkling with the toothbrush isn't too hard.
And we've still got two other edges to do after this one.
So there's plenty of opportunities to see me splattering paint with the toothbrush.
Because there's not a lot of paint gets on the edge with sprinkling, I'm not talking the edges.
I've never had one of these stick together on me.
And I'm not burnishing the edges either.
The stiffener in the lever of a springback is one of the few times where you want the grain of the material to
run from the spine to the fore edge and not head to tail, because you want the lever to be stiff in that direction.
I'm going to make the lever stiffener about a quarter of the width of the book.
I'm going to round it up to the nearest 5 millimeters.
So I think it was 52 was a quarter, so I made it 55.
And when I lay it down on the book, I'm going to leave a 2 millimeter gap from the spine to the stiffener.
This card isn't very thick, but on a larger springback, which may use laminated manila card, it's common to tear
or even pare the edge of the stiffener so that you get that gradual thinning as you go towards the fore edge, so
you don't have any ridges showing through the split board.
Now, the books don't mention this, but I always apply the adhesive on the side that's going to be on the inside.
And this case, it's also the thinner of the two materials.
And the rule of thumb is that you normally apply the adhesive to the thinner material.
But I'm also doing it on the inner material because I want it to pull inwards.
If you judge the amount you fold over this fore edge, then you don't have to trim up the lever.
But I normally end up not folding it over quite enough and trim it up later, which isn't the end of the world.
But it's a bit of fun to try and see if you can get it just right.
You do want that graduation out towards the edge.
Fold it over so it aligns with the edge of the manila stiffener.
Put some barrier sheets in and some blotting paper on either side and let it dry under some light weight.
In the cloth springback notebook, we used buckram for the clothing.
For this project, we're going to use the more traditional leather.
So we're going to measure how wide the clothing needs to be.
And we'll go just inside the manila card of the lever from one side to the other.
Now, this is a good use of leather that's got cosmetic imperfections.
So I've found a hide that's got some issues that I can't really use for anything else.
But it's still strong, good leather.
So I'll cut the piece out.
We're going to cut about the same length as the book, though it doesn't need to be the same length because we're not going to
cover up the tapes.
We'll pair the long length of the leather because that's the edge that's going to go on the outside of the lever.
We don't want any sharp transitions in thickness in the lever, which may show through the split board.
I should mention that this leather is about 0.8 of a millimeter thick.
If you're using thicker leather, then you may want to thin it down or pair it more towards the outer edges.
We'll cut a piece of leather to go at each end and in between the tapes.
We'll number them to keep track of them.
I should use a different colored pencil so it's easier to see.
I'm going to hedge my bits with adhesive here.
I'm going to use the paste on the leather.
I want the penetration of the paste with the leather.
I'm not going to wet the leather out because I don't need to prevent the tide marks on the outside.
So you won't, since we won't really see this leather and I don't need the working time.
But I'm going to use PVA.
I'm going to put a good layer of PVA on the spine and then down onto the lever between the tapes.
I'll refresh the paste before putting them on the book.
Now, I don't want to stretch the leather around the spine.
I don't want the leather to pull the boards open.
So I'm just going to lay them over.
But I do want to work the leather down really well onto the spine.
I'll put a barrier sheet under the levers and some blotter papers on either side.
And then I'll let it dry under some light weight, one brick at most.
And I'll probably turn the blotters around over the next few hours as well.
Now, I'd like some help picking the color of the cloth for the outside of the book.
My original plan was to use this light green to match the sprinkled edges and the endpapers.
But I'm not so sure now.
I've got a nice deep red and I've got that nice blue as well.
And I've also got a deeper green, but I'm going to veto the deep green.
I hope to keep this series to three videos.
I hope you've enjoyed this video.
If you have, please hit the big thumbs up.
And if you want to be notified of my future videos, please hit the subscribe button.
And until next time, cheerio.
