M2 Summer Haul - 1/64 scale Trucks and Muscle Cars

wtffor
76 followers
Jul 12, 2023
Comments are disabled for this video.
I am getting way behind on my M2 videos.
As of filming this late June 2016,
we've got quite a few M2s that have been
kind of sitting by the wayside,
waiting to get reviewed.
Better now than never, right?
Some really cool things.
Some of this stuff you're not gonna find
in your local stores all that easily.
Some of it you will.
Probably the easiest thing to find
is the Auto Truck Series.
Currently we've got R34 here,
so that's release 34.
We're gonna be reviewing all six vehicles,
opening them all up.
And I think currently we're on R35 now.
You can find in your stores if you're right up to date.
I haven't seen any in mine yet,
but we've also got the Auto Drivers.
Just a few of those, a couple choice pieces.
And some more of the Auto Thentics,
or I believe those are the Auto Thentics, yeah.
These are the Premium Edition vehicles.
We'll be opening those up as well.
And there's a few different releases.
We've got R32 and a full set of R33s.
We've also got the Wild Card Trucks.
These trucks are pretty hard to find.
I had to buy these off eBay.
And then going all the way across the board here,
we've got the Auto Lifts.
We've got three of the newest release Auto Lifts.
And also one of these Auto Wheels M2 things,
where it comes with a screwdriver, various axles.
The Auto Lifts are pretty cool.
You can see some of the trucks there.
So if you have time, stick around for an opening party.
We're gonna get all these things,
well, most of them cracked out anyways,
maybe not all of them,
but definitely all the ones in the boxes,
some of the clamshells will be left closed,
such as those Auto Lifts.
And the reason being is I just don't have anywhere
to put these vehicles other than on my wall right now,
next to some older Auto Lifts from M2.
So I think that'll kind of look nice
up on the wall there with those.
Starting off this video with some Auto Lifts.
These are not available in Canada,
not in any of the large retail stores
that I'm aware of anyways.
Really neat packaging here.
These things weigh a good couple pounds,
probably a good five pounds or so.
And what you're getting is two all die cast vehicles
with a die cast metal lift,
the Auto Lift and a plastic platform base.
Little information on the unique colors and graphics
displayed on these, blah, blah, blah.
We're after the vehicles, not the words, right?
So one of my favorite castings from M2
is this Ford Falcon Club Wagon Van.
And it also comes out in a panel van.
So that's the one.
We're not gonna open that up just right now
because like I said.
So also we've got the Auto Lift 1969 Ford F100 Ranger Truck.
From R14.
There is a lot of releases of these Auto Lifts.
So that's the 14th set.
I think there's normally three or four different vehicles
or packages, six vehicles in total for each release.
And these have been released over a number of years now.
But as you can see,
we've got a very attractive looking
black and copper Ford on top
and a rather hideous pink one on the bottom.
Well, to each their own.
I don't mind it that much,
but I would definitely take the black one over the pink one.
And then the other Auto Lift,
the last one I have for right now,
I think there may have been one other release,
was this Studebaker 2R Truck.
This is a vehicle that M2 has had on a heavy,
heavy rotation as far as paint schemes and releases.
And as much as I like it,
I think I've got enough Studebaker 2Rs.
So if you're listening M2,
we need more vehicles, you know, like the 69,
get a camper on the back here or something like that.
You know, what Greenlight's done.
Diversify your collection and get us collectors,
you know, hoarders even to buy more of this stuff.
Because when I stopped wanting to buy things,
such as any more Studebakers, you know, there's trouble.
Now, the other vehicles that I never find
in my local stores here in Canada
are these wildcard pickup trucks.
Well, certainly these ones,
because I imagine these were probably somewhat hard
to find in all of your American locations,
just because they are so cool.
Like for the price,
you're getting a beautiful clear Lexan case,
which we may or may not be able to open on camera
without breaking something.
Ah, there we go.
They're tight.
This is a really nice truck.
Let's zoom in and have a look at it, if we can.
Beautiful detail engine, nicely closing hood.
And then it's got the doors that open and close.
The old Chevy, what do they call that?
The Cameo back there, I'm not quite sure.
It's on a platform that needs to come off
with some Phillips screws.
So let's get that done right now.
There you go.
PH0 from Mastercrap.
And now the truck,
now that we've got the screws removed,
the truck is released from its plastic.
Great, great presentation on these vehicles.
Lots of intricate parts and details,
quality paint, quality Tampa work.
For the most part, very good quality closing doors
and hoods and whatnot too.
So that's always a bonus.
At this scale, it is rather difficult
for the manufacturers to make a perfect piece.
And they come very, very close to it,
in my opinion, for the most part.
And the next piece,
we've got the 59 Chevy Apache Fleetline.
Let's get that one cracked out.
Let's take a little zoom in.
The first thing that I noticed right off the bat
about this truck is the steely painted wheels.
Loving those black steely painted wheels.
Again, another very detailed engine under the bonnet
or hood.
Opening and closing doors.
Again, for the most part, pretty tight.
Nice looking vehicle.
Very proportionate.
This one is not a dragster like the other one that we saw.
Let's just zoom out a bit
and check out the tire width difference
of these two vehicles.
As they call it in the drag racing world,
this GMC, or what was the Chevy?
One or the other.
GMC, it's been tubbed.
This one is tubbed right out.
Look at the box.
Actually, they've used the same similar type box
on both of them to allow for that,
but this one clearly does not require
the tubbed out box that the GMC does.
Different boxes altogether on these vehicles.
Otherwise, very similar.
Probably a reuse of the casting,
but this goes to show how great M2 is
at giving you a variety of vehicles
that basically use the same body mold
and did in history.
You can see you've got the different grilles,
completely different grilles and bumpers.
This one's got the little cones that stick out.
This one's just a commercial flat bumper.
This one has Chevrolet on it.
This one goes up in the little mouth type piece
and it's just completely different.
Check out the engines under the hood.
Pretty much exactly the same, actually,
so I'm not really up on these vehicles 100%.
No, if they should be exactly the same,
but these are custom vehicles by the looks of it anyways.
And there you have it.
Pretty cool trucks.
These have been out for quite a few months now,
so if you're after them,
check the old eBay is what I always recommend.
Well, seeing that we just looked at some trucks from M2,
it probably makes sense to continue on that path
and look at a few more trucks.
We've got from R34, release 34
in the auto truck series right there,
the 1969 Ford F-250 Contractor Special.
We'll get that one cracked out in just a second,
but we'll quickly go through each one.
There's six in total.
We've also got the 59 Ford Falcon Club Wagon.
The windows, and I bought two of that one,
so we'll put that aside.
I also bought two of the Contractor truck.
I must be very partial to those ones.
And then we've got, of course,
the Chevy Apache Stepside from 1958.
We're gonna crack that one open, too.
Very nice packaging on these, too, of course.
If you don't wanna crack them open,
it's really not a big deal.
There's all sorts of different options
when you're collecting M2, so I'll leave that up to you.
We've got, what do we got here?
The 1966 Dodge L600 Tow Truck
with the Dodge sales and service tampos on it
in kind of a pale green.
Pretty cool.
Coming out of the manufactured display case,
which I took right from Walmart when I bought the whole set.
We've got the, again, a 49 Studebaker 2R.
We've also got the 60, 1960 Ford C600.
Now, due to the number of vehicles we're looking at today,
we'll just take a brief look at each of these vehicles loose.
What a cool-looking van.
No opening parts on this one, of course,
but extremely detailed, as all these are.
One of my favorite features of this one
is the little Ford emblems or writing on the hubcaps.
And, of course, the same type of extremely detailed
tampo work that we're accustomed to seeing
on these vehicles.
The F, what was this one again?
The F-250.
It's got the opening doors and whatnot,
so you've got quite a nice little interior
in there, of course.
Detailed hood with radiator, engine,
clear lights on the front.
These things are all metal,
put together with Phillips screws.
Same as all M2.
So that's a nice commercial contractor special,
as that one was called.
And then this one's another variation of the GMCs
and the Chevys we were looking at earlier.
It's got the, what is that,
flare side box of sorts on the back, flare side fenders.
This one's got the opening hood,
same as the other one, opening doors.
Two-tone interior on this one.
Great details, of course,
those little taillights that are just amazing
that they can get these things on there
and get them to stay.
Two-tone hubcaps, even.
And fully modifiable, these pickup trucks,
the box is separate than the cab,
so you can take the tow truck, for instance,
take this piece off and take the two screws off it,
put it on the other vehicle.
Dodge has some wicked details,
including the air horns on the top,
the tow hooks on the front bumper
and little signal lights right there.
Clear headlights, really cool stuff.
Real rope in the tow system, the tow pulleys.
Haven't actually got that to pull anything yet,
but that's all right.
And the other thing too is that back tow piece
will fit perfectly on this truck,
as we've seen it before.
They mix these up quite a bit.
So again, this box is removable.
You can see it's got the two screws on the bottom,
so you could easily remove this box
and turn it back into just a hauler, if you like,
instead of the pickup version.
Lots of details on this one as well.
Kind of goes without saying, really.
Probably could drop that sentence
from my videos around this time.
And the Studebaker, two R,
nice little hood emblem on the front of it, you can see.
It's got opening doors, opening hood,
very nicely painted engine.
And the door's open, got the little lights on the back.
It's even got a little hitch on it,
little trailer hitch, although I'm not sure
you could hook anything up to that.
So there you go.
That's those, and we've got a lot more to look at here.
As for the Detroit Muscle Series,
these are a premium edition, lots of detail on them.
I do have two from the R32 Series,
so we'll just quickly crack those open right now.
I've opened up all of these Detroit Muscle packages
that we looked at briefly at the start of the video.
Two of the cars I've got loose here
to show you them in detail,
and then the other set, the R33 set,
I've got here in the cases just temporarily
to show different options for displaying these things.
If you're so inclined, you can leave them in the cases
and stack the cases up.
The only thing I might note about stacking these cases,
however, is that they don't really lock in place,
so they're easy to fall over.
You get them too high, and they'll just topple,
but nice little display feature,
just a quick once-over of the case itself.
Every premium edition M2 car
comes with one of these diamond plate top Lexan cases
with two screws holding the car to the base,
and usually one door is open and the hood is open
if it opens, so just a quick look at that,
but let's get them completely loose
because this is the way I like to display them.
These are the R32 release cars,
and we're looking at, what are we looking at here?
A Plymouth Kuda, 69 Plymouth Kuda 440.
Let's see if we can get some crisp clarity
as we look at this car.
Loving these steel wheels with the red line tires.
Painted gauges on the dashboard even.
Great details all the way around.
One big piece of transparent plastic for the tail light
with a silver painted insert,
and even, this is something that's hard to see
with just your eyeballs.
You can see it even says Barracuda
right on the back there in super, super small writing.
Give you a little bit of a scale.
Here is my smallest Phillips screwdriver
for getting these things apart.
Reverse lights, yada, yada, yada.
You know where I'm going with this.
These things are awesome.
M2 really deserves all the credit they get for these cars.
So there's that one,
and then the other one we're looking at already
that's loose is a 71 Dodge Charger with a 383.
Big block, 383 big block under the hood.
Nice little spoiler there.
Chin spoiler I was about to say.
Beautiful, beautiful rims.
Look at that brown interior with the black dashboard.
That's really cool.
It's got a matte finish on the Lando part of the roof.
The vinyl covered part of the roof is,
it's not a glossy white.
You can hear the difference.
It's really cool how they've gotten such details.
See if we can capture that on camera.
It's even got the delineating chrome on it, painted silver.
Extremely small painting of that.
So that's one thing with these cars.
It's easy to, in my opinion,
to overlook some of the amazing details of the cars
when they're hidden in these boxes.
So I encourage you to open them up
because even if you want to put them back,
it's certainly an option that you can do quite easily.
Save the two screws.
Keep the box somewhere.
You can put it back in.
You can even keep the cardboard.
I've got boxes and boxes of empty M2 cubes,
as I like to call them.
Oh, that one's got a bit of a wobble.
That one rolls real nice.
Let's get the other ones opened up.
Check out this eye candy.
It's really something to get them all lined up
like you're in an actual car show.
All have opening doors and opening hoods.
Some of them have full windows on some of the doors,
such as this Cutlass over here,
whereas other ones have just the vent windows on the sides.
Some have the windows rolled right down.
They all have authentic wheels.
And the ones with the two-tone body paints,
these Lando roofs of sorts,
also feature that textured paint on the roof,
such as this one, outlined with silver paint.
And we saw it again over here on the Superbee
and the engines.
Some of these ones' details are just out of this world.
Dackles and everything on this one.
Most of them have an orange big block under the hood,
silver valve covers and black air cleaners.
Some of them are silver with blue,
as whatever's fitting to the car.
Fords are blue, usually.
Chryslers often have orange, as do the Chevrolets.
So there you go.
We've got, what do we got here?
The Oldsmobile Cutlass 442.
The Dodge Superbee, featuring the Hemi, 1970.
These are all 1970s, actually.
A 1970 Chevelle SS with a 396.
And we've got the Ford Mustang Mach 1 with a 351 in it.
351 Cleveland, is that right?
1970 Ford Torino Cobra.
Twister Special, that one's called.
And there you go.
It's got the Twister decal right on the back
to show you that.
And lastly, the Plymouth Roadrunner.
Let's just do a quick once-over of each one.
Shut the doors, shut the hoods.
Everything, I've already tried all these out.
Even if I can't get it shut one-handed,
they do shut and roll nicely.
This one has to actually go over the intake
on that hood, on that engine.
So you gotta kind of finesse that over
with both hands, I think.
And the Mustang.
Real plastic louvers on the back, probably removal.
49 parts on that car.
That's about the highest I've seen with these M2s.
They tell you exactly on every package
how many parts it took to build the car.
This one was 44.
Not surprising that you can get up that many parts
when you've got four headlights separate
on the front of it and whatnot.
Nice two-toned here on that one.
With the appropriate Super B decal on the back.
Twin tailpipes, each are a separate part in themselves.
And this one, this is a really,
one of my favorite castings because of these windows.
Do such a nice job, even on the inside of the door panel.
It's got speakers.
Everything's pretty much where it should be
for the size of the car, quite incredible.
And look at, they close so nicely.
You don't find this in any other casting,
really, currently on the market
that's widely available to North America.
Well, we've got three more to open up.
And these are from the M2 Auto Driver series.
These are the baseline M2 vehicles.
They have 25 individual pieces, roughly.
That's still about five times as many
as your typical Hot Wheel, so that's pretty cool.
We're gonna open all these up right about now.
So these vehicles come with a plastic base as well,
but no cube around them, no Lexan cube, two screws.
These are not the diamond plate bases
like the premium lines.
And although they have separate hood pieces,
the hoods don't open on these ones
because there is no engine underneath.
That's how they're able to achieve the cheaper price mark
of the baseline vehicles versus the premium.
Also, there's some other subtle details too
that you might notice,
such as not quite as much detailing on the front pieces.
So a little bit more basic look in some cases.
But still like full rubber spare tires
and all the other little things that you normally see,
just no opening doors.
And I'm pretty sure these are plastic base.
And there you have it.
Indeed, they do have plastic bases.
Still put together with screws,
so you fully customize these vehicles.
They roll pretty good.
Lots of detail.
I really like the pink one here.
This is kind of a fetchy color, I would say,
for the Charger.
And then the GTO Judge.
Look at that bright red interior and that capital.
Really cool.
Nice little pieces for the collection.
When you mix a few of these base vehicles in
with all the other premium cars,
you wouldn't even notice them being of a different number
of parts and whatnot,
because they do have the very same type wheels
as the premium cars, pretty much.
They're rubber tires with the licensed rims.
And the interiors are basically the same.
You might not find the two-tone colors,
but pretty much the same stuff.
Same type level of paint job detailing for the most part.
You've still got all the pinstriping and whatnot
where it's supposed to be on these cars,
like around the windows and the wipers
and door handles, all that.
And well, the one thing I've noticed just right off the bat
does not have the separate tail lamp piece
that you quite often find on these other
premium line vehicles.
At least it didn't on that car.
But overall, if you see a few that you like
and you don't mind having those in your collection,
that's perfect.
Or maybe your whole collection consists of these
because these are too expensive
or not available in your area.
It's all something to consider
when you're collecting M2.
And I would say that the auto wheels,
these are the ones with all the wheels in there.
If you don't have a screwdriver,
quick way to get one is buy yourself a car
and get a free one.
And you can take them all off the bases,
just like I have been doing.
But yeah, you got lots of different wheel options.
These cars are the same build level,
I would say, as the baseline.
This does not have any opening doors or anything like that.
Whereas your auto lifts are more of a
premium line type vehicle.
These are the heavy ones.
Well, this particular vehicle doesn't have any opening parts
but the other ones did.
So, hope you enjoyed this massive M2 haul.
It's been on my list of things to do for quite some time.
And I'm finally glad I got around to it
because I actually have a whole bunch more
coming in the mail.
Just picked up a whole bunch more newer stuff on eBay.
So hopefully we can get to that in a more timely manner.
Anyways, happy hunting everyone.
Thanks for tuning in and enjoy your day.
