Garlic naan in a cast iron skillet — tawa-style (no yeast, no oven)

Go to the kitchen every day!!!
242 followers
2.5K Video Views·Jun 22, 2023
It is absolutely possible to do restaurant-quality garlic naan at home, without a tandoor,
in a pan, on the stove. Any stove. We're not even gonna use the oven.
I'm not gonna lie, I had quite a few hilarious fails before I got this method down, but I mean
the results speak for themselves. First, dough. A fascinating thing about Indian-style breads is the
diversity of leaveners used. This right here is probably the original one — curd. Yogurt.
Crucially, yogurt containing live, active bacterial cultures. You mix this into some
flour, and in time, they will puff it up a bit. Then we got the dried yeast,
and then finally, chemical leaveners — baking soda and baking powder.
Here's the book from which I first started learning about Indian cooking over 20 years ago,
and her naan recipe calls for all the leaveners. All three kinds. It's like millennia of baking
history all piled up in one place. And for years, I've baked this recipe by simply cooking the naan
under the broiler on a pizza stone, and that gets you a very tasty little flatbread,
but it is not the naan that I know and love from Indian restaurants.
That is. I've had much better luck getting that effect with a no-yeast dough.
Two cups of all-purpose flour, like 250 grams. That's enough for four loaves.
A teaspoon of sugar enhances browning. I might just do half a teaspoon of salt.
You could want more, but I prefer to top my naan with some more salt at the end.
A teaspoon of baking powder. Double-acting baking powder. I think that helps the texture.
And then just a scant quarter teaspoon of baking soda to neutralize the yogurt that's coming,
after a couple tablespoons of any oil you want. I'm using olive oil.
About a quarter cup of yogurt, 60 grams or so. Then just enough milk or water to bring this
together. I started with half a cup, like 100 ml, and then I ended up kneading in maybe 50% more.
Most Western dough recipes, including my own, generally tell you to start with an overly wet
dough and to keep kneading in flour until the texture is right. Every Indian dough recipe I've
seen does the opposite. They start dry and then knead in liquid. And the right texture for this is
nice and soft, but just barely sticky. It's drier than pizza dough. It should be just a little
sticky, and the gluten is developed enough when it kinda bounces back at you, like that.
I'll oil this to keep it from drying out, and it's a quick bread. You could cook it right now.
It would taste OK, but you wouldn't get very many bubbles. I've found that you need to let
it sit for at least a half hour under a wet towel, but it gets better with time.
Leave it for many hours, if you can.
OK, now let me show you a version with yeast. Almost the same as before. A couple cups of
flour, a teaspoon of sugar, half teaspoon of salt, teaspoon of dry yeast — bloom it if you
want to be safe — and a little baking powder too. Half a teaspoon. Most non-recipes with yeast seem
to call for some baking powder as well. I don't fully understand how they interact,
but there's a few great threads about that topic on pizzamaking.com. I've linked those in the
description. Couple of tablespoons of olive oil, and this is important, just a little yogurt,
like a tablespoon. Too much yogurt and yeast together and it becomes a cake, not a bread.
I think it's all the acidity weakening the gluten structure. A little more milk or water this time,
because we have less moisture from the yogurt. I think I did a cup total until I got the right
texture. Remember, smooth, soft, but only slightly sticky. Like any yeast bread, this has to rise for
at least an hour at room temperature. Here's the no-yeast version after a couple
of hours, and to my surprise it has puffed up a bit. I'm not sure the extent to which
that's the chemical leavening or the live bacteria in the yogurt, but lots of Indian
no-yeast naan recipes tell you to leave it for many hours in a warm place. I think they're
depending on those bacteria in the curd. If you don't knead this a little bit more
shortly before you cook it, the naan tends to blow up one huge bubble. My goal is three or
four smaller bubbles, hence the last-minute kneading. And there's our four dough balls
ready to bake. I really admire folks who could manage this much effort to make a side dish for
typical weeknight meal. I can't. This is a special occasion thing for me, and on a given weeknight,
I'm much more likely to cook with the sponsor of this video, HelloFresh, America's number one meal
kit. One thing I love about this is the seasonality. You'll note that this week's
recipes are sweater-weather suitable. There's meal plans for everyone — locale, family-friendly,
veggie. There's everything you need in the bag to get dinner on the table in less time than it
takes to go to the store. They have these stock concentrates that give tons of slow-roasted flavor
to quick dishes, for example. And speaking of dishes, these simple six-step instructions use
cleanup-minimizing strategies, like roasting the green beans on the same tray as the meatloaves.
The plans are flexible. You can pause the deliveries whenever you need to.
You can ask for extra protein, some garlic bread, whatevs. HelloFresh gives a lot of meals
to charity, by the way, and they're stepping that up this year with the whole global pandemic thing.
Go to HelloFresh.com and use my code 80ADAMRAGUSEA to get a total of $80 off across
five boxes, including free shipping on your first box. $80 off with my link and code in
the description. Thank you, HelloFresh. OK, let's bake our no-yeast naan. Some people
roll this out with flour. I've found that it's a lot easier to just let it stick to my counter.
The sticking helps. It keeps the dough steady and stops it from immediately snapping back.
The way you keep it from sticking to the rolling pin is to simply roll outward and off. Outward
and off. That's instead of rolling it back and forth. If you did it back and forth, it would
stick. I think the perfect thickness is just slightly less than the thinnest you could possibly
roll it. Now, garlic. Small differences can be very big in a simple food. In this case,
I'm talking about how you cut the garlic. I grated this garlic, which I gather is one of
the traditional methods here. Chopped garlic gives you pebbly pieces that tend to fall
out of the bread. Thin, stringy pieces from a grater or from a garlic press seem to adhere
a lot better. Crushing it with salt would give you a similar effect as well. Thin,
stringy pieces that stick well to the dough. A little fresh chopped cilantro as well. This is
like pizza. You can top it with whatever you want. Be more creative than me.
But one thing that I really like is this traditional method of rolling the toppings
into the dough. This really embeds them, makes them part of the bread, while still maintaining
some heterogeneity. Last step right before you cook it is to wet the bottom side a little bit.
This dissolves the surface starch and creates a sticky layer of literal paste that you would
use to make this stick to the inside wall of a tandoor, which is a vertical oven.
In our case, we want it to stick to a cast iron skillet on medium heat. Every stove is different.
I've found that medium or a little less than medium is the right temperature on my stove,
but that took experimentation to find out. To do this method, an Indian cook might use a flat,
round griddle pan called a tawa. It's a pan with no sides. I've found that my cast iron skillet
works pretty well too. Stainless steel has not done as well for me, but maybe you could make it
work. This method depends on the dough sticking to the pan, so we can't unstick it to check the
bottom. We just have to guess when it's cooked, and that took me a lot of practice. After just a
minute or two, you should see some bubbles blowing up. I am not sure the extent to which those
bubbles are from the double-acting baking powder reacting at high heat to make carbon dioxide,
or if they are simply steam from inside or underneath the dough. I suspect it's mostly
steam, since lots of recipes don't use baking powder at all, only baking soda to react with
the acid in the yogurt. That reaction happened instantaneously, two hours ago. So I think this
is mostly steam inflating bubbles that were initially created by the chemical leaveners,
though my experiments indicate that the double-acting baking powder also helps to
aerate the texture a bit. After a couple minutes, you should see the edges starting to look dry
and cooked. I've also had good success using my nose to tell when the bottom is done.
Basically at the first tiny whiff of a burned smell, it's time to cook the top.
For standard tawa naan, you would invert the pan and then cook it over the open flame of a gas
stove. But I've found that it works just as well with a cast iron skillet and just as well on my
electric resistance coil stove. I just jack the heat all the way to high and rest the upside-down
pan right over the burner. The only kind of stove this wouldn't work on is an induction stove,
because induction doesn't heat the air. I'll give the induction folks an option later.
I want to see some smoke coming out. My goal is to get some singeing on the bubbles,
while the rest of the surface should still look almost raw. That is key to the restaurant-style
naan that I'm familiar with. Parts of the surface should still be quite doughy.
That is done, and if you're thinking it doesn't look like naan yet, that's because you're missing
the final ingredient — a generous brushing of melted butter at the end. I'm using salted
butter to complement the slightly under-seasoned dough.
The final remaining challenge is to unstick the bread from the pan. It'd be a lot easier to
scrape this out of a tawa, which has no sides, to get in your way. And yeah, this one is gonna
stick on me. You know what I realized? I baked like 50 naan in a weekend to prep for this video,
and I'd really messed up the seasoning coat on my cast iron. So I did a very quick re-seasoning.
Clean pan on high, a little spray of oil, wipe it thin, let it burn until it stops smoking.
Once I had an OK seasoning layer again, my naan started sticking when I wanted it to stick,
and releasing when I wanted it to release. Ironically, the starch paste glue on the
bottom tended to not stick well enough when I tried this in a stainless steel pan.
My naan just fell out. Much better results in the cast iron. A little too much color on that one,
but nice. This tawa-style naan is amazing at replicating the effect of a tandoor.
If we simply cooked it in a pan in oil, it would taste like fried bread. But this tastes baked,
because the bottom cooked on that little layer of starch paste instead of fat,
and the top simply cooked in very hot, dry air. That gets you crispy bubbles and a baked flavor.
You could maybe replicate that effect by transferring the pan under a very hot broiler
to brown the top, but you know what doesn't work? Blasting it with a kitchen torch. I thought that
might work, but all it did was burn the garlic. Now, for some reason, the no-yeast dough seems
to work better for tawa-style naan. Most recipes for tawa naan that I've seen call for no yeast.
I'll show you what the yeast dough does with this method. I'll knead it again after a couple
hours of rising, divide it into balls and then proof them for a little bit — at least 15 minutes
to get a second release of gas. Oh, by the way, you have to give the pan a very quick wash and dry
after each naan that you cook. A lot of residue from the previous naan could interfere with the
sticking process. Back to my yeast dough. I'll roll one out and top it as before,
wet the bottom to make it sticky, on the pan it goes. And for me, the yeast dough just tends
to puff up evenly, lots of tiny little bubbles all the way through. I'm not getting any giant
bubbles that will go crisp when I invert the pan and brown the top. I've also found that for some
reason the yeast dough doesn't stick quite as securely. Gah! Well, anyways, brush that with
butter. Perfect color on the bottom there. I would say the flavor of this one is superior,
because yeast fermentation is delicious, but the texture is inferior. It's like a western dinner
roll. It doesn't have those crisp, phyllo-esque bubbly layers. Maybe it takes the intense heat
of a tandoor to get that from a yeast dough. With the tawa-style method, I would absolutely do the
no-yeast dough again. Now, what if you have an induction stove, or what if you're simply too
scared to do the whole pan-inversion move? Well, you absolutely can. Cook the bread until it's done
on the bottom, and then just flip it. Just brown the other side a little bit. A little bit more
than that, but not too much more. I think a key to any naan is letting the surface remain a little
doughy. That looks OK. The texture's not as good as if we'd cooked the top with hot air,
but it still tastes like naan because we cooked it without oil. It tastes baked and not fried.
So, if you're feeling brave, give this tawa-style method a shot. Again, it really
took me a lot of practice and I've hardly mastered it, but the results are pretty extraordinary.
