SAILBOAT REFIT: A Lot Happens In A Week [S4E50]

The Unwind Diary
196 followers
1 Video View·Jun 12, 2023
Welcome back to another episode of painting, building, fiberglassing, planning, inspecting,
hammering, cutting, and working towards one big dream. Welcome back to Sailing Magic Carpet.
There's been many adjustments made to the boat this week.
There will be a post here.
As always, there's a lot going on in the boat shed. We've hit some major milestones recently.
I cannot believe it. I'm so happy with this. But there's still a long way to go until the water.
The decks are finally closed but they need to be fiberglassed and the bulwarks need to be built.
There's finally some fresh paint being applied in the interior but a lot more of it is needed.
The interior layout is starting to get sketched out. Last week we made settees and a rough outline
for the chart table. But again, there's so much more to do. And the cockpit, although we've made
some good progress with new beams and designs, there's still a lot happening there as well.
So that's where we'll start this week. I will start today by taking a few measurements
because we might have to stop by at Edensaw and grab some more wood.
I need more wood for the framing, the lazarets here. I need some for the quarter berth. I need
some nicer superior teak trim for the backrests. Yeah, odds and ends like that.
Well that's not particularly easy because it also depends on not wanting to put a hole
through the back windshield and me being able to shift gears while I drive. Oh baby.
We'll have to head over to Edensaw soon to buy some lumber but for now we'll keep focusing on
the cockpit. Over the last several episodes Aladino has built new bulkheads and beams and
has even coated them all with epoxy primer. Aladino wanted to put all these new pieces in place
so he could continue with construction. So I've put all the framing back in just temporarily.
I think I'm heating up the hot glue gun and then I will make a template of this partition here.
These templates are just stuck together with hot glue. It's quick, easy and gets the job done.
And personally I find the templates themselves quite beautiful,
especially since the curve of the hull in this boat is so graceful.
Piece by piece it gets easier to visualize for us and for you. So yeah I just transferred the
template on the table, cut it out. It always takes a few tries where I still have to bring it down
and then I trim the edges. I put on a bit of angle because that's how the hull is. But now
it is time to crack open a beer and call it quits for the day. Well amazing partition built here.
You did that so quickly. Well that is quite easy to do but thank you. But it looks so cool.
You're very impressive. One more to do over here. All right. You are. You sanded the entire decks
today. That's true. That's impressive. I did just sand the decks and I just came back from a run.
Yeah. That's why there was a big gap in filming. Yes behind the scenes of all the videos I have
been on a mission to run one mile every day for 30 days. I did this challenge last year actually
and it felt so good that I'm doing it again. It's a nice way to end the work day every day.
Go Maya. Nice. All right see you tomorrow everybody. The next day we made a quick
trip over to our favorite lumber store to pick out some new material.
Successful trip to Port Townsend which we didn't really film but I kind of filmed on my iPhone.
We got some new wood. Do you want to introduce what we bought? We have a few more board feet
of Alaska Yellow Cedar and then a little bit of Sapele. The AYC is to continue framing
in the cockpit and also for framing interior. As we put the backrest back on for example there's
a bit of AYC holding it all together. And the Sapele instead will be trim for the backrests
to give it a little harder edge and a nice contrast to the Okume plywood. And also I've
got an update from the cockpit. Now everything that we have produced and made so far is in place.
I have all the framing for the two lockers and I do have the partitions too. I just want to
show it to you because the next step is disassembling everything again. These two
partitions will get fiberglassed just like this one. So the next step is cutting into
the fiberglass and removing the balsa in this section where I don't want it.
All right a big chunk is out.
So now I'm just preparing a little bit of glass because Maya will
glass the two partitions that we just took out of that compartment.
Man if you guys actually heard Aladino and I speaking together when the camera's not on
and nobody's around you would be shocked. I don't want to hear it.
They would all mort instantly. They would all mort instantly.
Dini and I have our own strange mishmash of words based loosely on all the countries we've visited
and all of the ridiculous mistakes mostly I have made when trying to express myself in a different
language. Some of those mistakes are hilarious enough to become solidified into our own little
language which is now a mishmash of French, German, Spanish, Italian, Dutch, and English.
The only rule of course is that no word is either pronounced or used the way it really should be.
Give it a few more years and I imagine we'll be completely unintelligible to anyone except
each other. I'm going to be honest spending all day in a workshop will never be my preferred way
to spend a day. I'm looking forward to finally sailing again and having time for things like
music, writing, reading, and spending time really thinking through our own video productions but I
will also say that my enjoyment of the refit has increased significantly now that I'm a bit more
comfortable with it. At the beginning it was very frustrating to have almost no idea how to work
independently, how to fiberglass things correctly, how and when to use different tools, even things
like demolition were difficult at the start because I just didn't have much of a concept of
how things are actually built. But I've now developed a bit more of an understanding of it
all and I can work more independently and even end up with a fairly good results. There's a great
deal of satisfaction that comes with learning a new skill and finding ease in something which was
once quite difficult. Nice mask lines. These are gonna be almost permanent soon. Anyway now that the
partitions are fiberglassed and Aladino is just clearing up from this cockpit situation we're
gonna apply a bit more glass to like the outside of the cockpit well as the last thing we do today.
You want to gently massage it in place so that I can cut the excess off afterwards. The goal is to
have every piece of structural wood on the boat either coated in epoxy or fiberglassed with epoxy
for waterproofing stability and strength. It will feel good to know that there's
no weak points that we have to worry about when we're out crossing the pacific ocean.
So the rebirth. The rebirth has kind of been ahead of the game this whole time.
It was the first area to get fiberglassed, first area to get primer, and now it's going to be the
first area to get its final coat of paint. So we're going to be doing two coats of Epifanis
two-component polyurethane paint. We love this paint. We used it on Magic Carpet One
so all of the white that you see on Magic Carpet One was this paint and it's very durable,
extremely scratch resistant, and beautiful we think. So we're using it again on this boat.
Did you purposefully pick out your Epifanis shirt today? Of course.
There's a little sneak peek since we have done some parts already.
That's what it looks like. That's what the whole rebirth is going to look like.
We always begin by degreasing the surface with acetone.
To clarify that I'm not using spaghetti sauce. This is acetone.
All right I was holding the camera but then Dini took it from me because he said he wants to get
my reaction. I haven't seen this yet. Oh we did here too. I don't see a thing.
So yeah the surprise is it's beautiful.
Is this only one coat? Yeah it covered pretty good here. It covered really well. It's interesting how
it covers differently here. Instead it didn't cover as much and of course there's technique
and many things to it. Wow what good paint. I love this stuff. It looks so good. Yeah I mean
for one coat this looks amazing. Normally one coat still looks a bit patchy. Totally. I tried
to apply it thick but that's why it ran on me a little bit too where I applied it with the brush.
So good Dean. With two coats on this it's gonna be perfect. Yeah totally. Yeah one shines through
actually. I'm sorry I don't think the camera picks it up. No it does. There seems to be a bit of
like gray but that's just what is darker underneath. You can totally see it. Yeah pretty awesome.
I think it's not gonna need more than two coats. We'll see and if it does it does which is okay.
Two to three coats I would say is always safe. Yeah well it looks fantastic. I like it too.
And so you're gonna paint it again like now. Just exactly. Yeah exactly yeah. That is also
one parameter that I always look at when I compare different paints is recodability
and whenever I can do less prep work and continue with the coating. That is big bonus points for me
which is the case with this product. After two coats and with the tape removed the results were
gorgeous. Imagine when the whole boat is finished like this. A beautiful crisp white to contrast
the rich wood and the shelves will be filled with books. There will be cushions on all the berths
and brightly colored blankets that we buy in Mexico and fresh flowers from some market in
French Polynesia. One day this will be our home and personally I'm really looking forward to that day.
So now we can wrap things up. It's been a good week. Some fresh paint, some new fiberglass,
some new wood waiting in the wings to be used and the cockpit keeps marching forwards towards
completion. As always we'll be back next Friday with a new installment of Saline Magic Carpet.
Thank you so much everyone for watching. A big thanks to our patrons for making these episodes
possible. If you'd like to become a patron you can do so for as little as two dollars a month.
It's what keeps the channel alive and in exchange there's lots of bonus things like every Tuesday we
post a secret vlog that only ever gets posted on Patreon and they're in real time unlike the
YouTube videos. An extra big thanks to these folks who always go the extra mile to make sure that
episodes keep being produced and we will see you all next Friday.
Hello everybody and welcome back to the Boatyard Session. Today I'm slowing it down a little bit and
I'm going to play a tune that I think is called Macpherson's Lament. The thing is when you play
fiddle for a while and you pick up tunes at various jam sessions here and there, sometimes the names
and everything can get muddled up. But the melody is a very beautiful one and I'll double check the
particulars.
