Hi everyone, thank you so much for joining me on my channel. It's Lou Collins here. I've
got a card for you today using the Textures Folk Art. So Floral Folk Art is a new collection
that's exclusive to Craft Stash and this is using the Flora and Fauna die cut flowers
and also the Bold Floral Background embossing folder. Let's walk through the steps and see
how I put this together and if you love this, please do give me a thumbs up and a subscribe.
I would really love that. And of course, as always, everything I've used is linked down
below. So let's get started. We're going to start with the embossing folder and I love
this embossing folder for beautiful backgrounds when you need a kind of a background pattern,
something subtle but not something that's going to detract from the rest of the detail
within the design. This is absolutely perfect. Now, of course, it's got the Floral Folk Art
design. It's six by six. So I've actually cut myself a six by six panel and I've also
got myself a card base that's the same size. I don't want a border around this one for
a change. I'm actually going to have it as a solid color. So that should just fit. Let's
just make sure that's the right way around. There we go. That will fit just on there beautifully.
I'm going to have this as a top fold card. So this needs to be the top. So I'm going
to put this directly into my folder now so I don't forget where the top is. Now, the
cardstock I'm actually using is one of the Tim Holtz Distress. The cardstocks, I think
the ideology that had the craft and then the beautiful colors on the front. So this is
one of those. I've had it a long, long time. I'm not even sure if they're even still available,
but it's one that I've had in my stash and it's this beautiful teal color. It's a dark,
dark teal. And I'll talk about my color choices a bit later when we add the flowers. So obviously
this was one of my new folders. I thought it was my old ones. It was stuck to the packaging
there. So just pop that inside. Now with the textures embossing folders, when you run it
through the plate sandwich, usually with any embossing folder, you usually take with a big
shot this kind of turquoise plastic plate out and put your embossing folder through two clear plates.
Usually what I found that that is actually a little bit too much pressure for these folders
because they're very deep, deep in design. So I'm going to put down the teal plate
then I'm going to take a rubber mat. So this is an embossing mat. You can sometimes have these
in your box with your die cutting machine. If you don't, you can purchase them individually,
just a thin rubber mat. So the teal plastic plate, thin rubber mat, the embossing folder,
and then one of the clear plates. And that is the perfect sandwich for these embossing folders.
And then look at this. Excuse the cars and the birds. I've got the doors open today.
It'll soon be school time. So there'll be lots of cars around here. But look at that. Isn't that
absolutely beautiful? And the color is stunning. And this is why I kind of didn't want to do
a white frame around the card base. I wanted it to be quite dramatic by just having the solid front.
So I can now glue this down onto my card base. I'm not going to do any stripping back of the
design. So I could take some sandpaper to this. I could take some gilding wax to it,
maybe some ink instead and really pick out the detail. But I don't want to with this. I want
to leave it subtle. But there. Isn't that just beautiful? So just with a wet glue popping that
onto my card base. So now I'm going to move on to the flora and fauna set. And I have already
die cut and constructed lots of these flowers. Now, my suggestion would be with these because
they are quite small dies, actually, but they make the most beautiful flowers. So
if I just pop them here for you to see, let's just get them out of the packet. Again, this is a new
one. This is obviously one of my display packets that I've picked up rather than my working one.
If I just show you, for example, each flower and I would use the front of the packaging
as a guide as well. So this flower is this one. So everything in this layer here is within this
die here. So my suggestion to you is when you get this set is die cut everything from multiple
different colors. So do your blues, your greens, your orange, your red, your pink, purple. Just
sit and have some fun die cutting and then go ahead and do your layering of different multiple
different colors and colorways and such afterwards. I do that. And what I do is I keep everything in
a little Tupperware box. So that's also got the floral folk art butterflies in there as well. But
this is essentially all the little pieces that I've ever die cut from this. And if you do
particularly want to just die cut one or two colors, go ahead. But all the spares that you
don't use, put in that box as well. So I've gone ahead and die cut lots of bits and I've constructed
lots of flowers so I can just simply put these together. Now, let's just they've got a bit
tangled from the stems where I've been storing them. Let's just untangle these. And for my
composition, I'm going to have a strip across the middle here of the same color cardstock. Now, this
is a solid strip that's going to just sort of act as a border between the top and the bottom half.
And I've just got just putting this on with foam pads. Now, because I'm putting it on with foam
pads, I've left a small border, top and bottom. There we go. Just exactly the same width and
directly through the center there of the card. It's a little bit overlapping that side. So I'm
just going to take a pair of scissors and just snip this edge because I want this card to be
perfect, to be pristine. So then I'm going to start playing with positioning. And what I tend
to do is work with the largest flowers first and the largest flower heads are these ones.
I want to be heavier down the bottom, mix and match the leaves too. You don't have to stick
with any particular leaves. This one is a two headed flower. There's one. So I'm just getting
my flowers first. And as you can see, I have alternated the colors. Pretty much that's all
of them. So let's start playing at positioning. We've got a couple of let's put that there. So
we kind of go purple, blue, purple, blue, purple. And then the same way here. We want to go. These
are quite large, these ones. So keeping larger ones more to the center if possible, and then
smaller ones out to the edge if we can. It's not always going to work in that way. And you can keep
nudging things along. That's the same as that one. So let's put this in here. Don't worry too much
if you if you find actually you have got florals that are next to each other that are the same
color. There we go. So I'm just doing my main stems at the moment. And then I'm going to Okay,
so I've got far too many at the top there, haven't I? So let's move these along and put one of these
down the bottom. Now I've also got some fillers, some stems. There we go. That's better. Happy with
that. So I'm not quite going to the edge. Happy with that. Yep, lovely. It might tuck the stems
under a bit more to balance it. But I would be happy gluing those down where they are. So I'm
going to go ahead and do that. And as I do it, if I've got any pieces like this, that can overlap
that strip, I will pull those out at the same time. So I'm going to start in the center, work my way
out on each layer there. So I've got my main flowers down. And now I can move on to a few
other elements I've got. So I've got a couple of these white pieces. And I just thought the white
was lovely because it was kind of a nice bright color that would stand out against all the dark
colors. So just a couple of them, kind of a leaf shape, but with a stem through the center. So
there could be a flower or they could be a leaf. So I'm going to put those one, oops, either side.
So they're kind of diagonal to each other. They'll be hidden amongst foliage,
but just pop out a little. Now I also have a couple of small blooms. Let's just take that
stem out of there if it wants to come out. I think it's glued in there. There we go. One pink
and purple, sorry, blue and purple. Oh, they're both the same, sorry. So both got the blue on the
top and the purple on the bottom. I'm going to save these because I'm going to scatter these
where I feel I need fillers at the end. It's always worth saving a few small flowers for towards the
end. And here's where I just go in and I fill in. Now I start filling in first of all with my bolder
where I've got gaps. So where I've got space and I absolutely need to fill spaces. So for example,
there I'll go in with the bolder flowers and I'll work my way down to the smaller flowers gradually
or leaves, sorry, leaves, not flowers, making it peek out from some florals at the top. I think
one of my flowers is going, I'm going to do that now. One of my flowers is going to go just in here
and then I'll put this kind of over the top so it's not just sitting there.
Layer that a little bit over the top of it. There we go. And then I'll look at doing the same
here or here. Let's do it in the middle. And I've got a little stem here that can just go
over the top. Now I could play with this for hours, adding more and more. But of course,
just be wary. You don't want to overdo it. This is where I move from now on to my swirls. These
are my last pieces. And these are almost like little vines. These ones have actually come
from a different die set. They've not come from the flora and fauna. These ones have come from
the beautiful large panel from the same collection, large circular panel with the
layering flower dies as well. There we go. So just a couple more, I think, on the very ends,
taking them out. So one there, one just on here. Do you find it therapeutic to watch someone build
up a card like this? I could do this. I really could do this for days. So let's just one and
the last one here, just there. There we go. A couple left over, but I'll use those on another
project. As I say, I'll put them back in my tub and then that will be those. So look at that.
The colors just work by just using two main colors for the flowers, two shades of green
for the stems. But actually, they are very similar. And then I've got the flash of white
and that's going to just echo this white sentiment that's going to go across the middle to help
balance everything. So I've cut this out and just stuck it on foam, foam tape here,
thin piece of foam tape. This is the same width as the card, pretty much. Just make sure if there's
going to be an edge that it's even on both sides a little bit. That's almost it's almost there.
There we go. There's always something to be thankful for. Now I might even go ahead and put
a few little gems or sparkles, but essentially that is that carpet together. So really, it's
just building up these flowers, but being careful about your color choice. Have you noticed the
blue teal is quite color coordinated with the blue and the purple in the flowers. I've chosen
all cool colors. You could go with a yellow background and red and orange flowers, for
example, just to keep that sort of color coordination going. So there's that card.
Thank you for joining me. If you could drop me a thumbs up and subscribe, I'd love that and hope
to see you again very, very soon. Don't forget everything I've used is linked in the description
below. Take care. I'll see you soon.