*NEW* DOLLAR TREE DIY | WOOD Home Decor | Easy HACKS & Fall Ideas | Interchangeable High End Crafts!

She So CraftDee
16 followers
10 Video Views·Apr 23, 2023
Hello crafty family and welcome to another tutorial by She Sew Crafty.
For today's DIY projects, we'll be creating some beautiful wood home decor projects that can be
used for fall and even enjoyed year-round. Now these projects can be decorated to your taste
and your liking, but there's so many ways to display it. Now as always, all of the projects
I create have a complete supply list in the description box so you can easily use it for
reference as you gather up your supplies. Now before we start, I have to say hey hey to all
of my subscribers and if you are a new visitor to my channel today, I hope you consider subscribing
as well and stick around to enjoy these crafts and to see all of the different ways that you
can display these in your space. So now let's just jump right into all of these awesome projects.
Now this project is a wood wagon decor piece. Now we are going to be starting with three crates from
the Dollar Tree. We're also going to use a wood stake and I got this for a dollar from Dollar
General. Now if you can't find a wood stake, you can also use some dowels from Walmart or the Dollar
Tree or you'll need at least six tumbling tower blocks as a substitution. Okay so we're going to
go ahead and start with those crates and I'm going to be using three crates for my wagon. Now if you
want a larger wagon, you can definitely add four crates in this configuration if you like, but I'm
going to stick with the three for today. Now I'm going to be joining these together with my wood
hot glue and my wood glue combination. So I'm just going to flip them the right side down and then
I'm going to add some wood in between each one of the crates. First adding the hot glue and then
adding that wood glue in between them and pressing them firmly together. Then I'm going to add that
last one the same way and you want to make sure that they're nice and even. Now we know Dollar
Tree crates can be uneven sometimes, so just make sure they are even. So I'm going to add some of
those Dollar Tree little clips on there just to make sure this stays together while we are working.
Now as you notice the sides of the wagon now have the open handle portions of that crate,
so we are going to be covering these with these craft sticks. Now I got these craft sticks from
the Home Depot for $1.49, but you can also use any craft sticks that they sell at the Dollar
Tree for this as well. So I'm going to cut each end of that craft stick straight and you just want
to make sure it looks like a plank. You want to add some of your hot glue on the side there and
just start laying these and planking them across the sides. Now you do want to make sure that you
stagger any seams that you have. This just gives it a more natural and clean look. Now when it
comes to that last piece that's too long, to cut that off what I like to do is just grab my pencil
and just drag it under that bottom edge along that crate's end and that will make sure you
have the perfect cutting line. And if you use a pair of nice heavy-duty scissors, these should
cut really easy. So you just add your glue and then you're going to add that final piece across
the top. So now we have that first row across the top all nice and even. So we're going to continue
adding rows on both sides and it should end up with three rows. Now we're going to add that second
row and as you can see we did stagger that seam with two more pieces and then we're going to add
that third row at the bottom. So here are all three rows on one side of my crate wagon and
we're going to repeat this on the other side. So here is one side all nice and complete and the
other side is nice and complete. So everything is all covered and done. Now as you notice there is a
small lip at the bottom and we are going to trim that off. I'm just going to go ahead and snatch
these stickers off the bottom first but we're going to go ahead and trim off that little ledge
of the bottom. So I'm just going to grab my cutting mat and my utility blade and I'm just going to
drag it along that bottom edge a few times and those pieces should just break right off and now
you'll have a smooth even edge all the way around. So by this time your crate should be pretty at
here so we can remove those clippies and we are going to start working on our suspension for our
wheels. So this is where I'm going to use that Dollar General plant stake here and I'm just going
to cut it to the width of the crate as shown here and I want to cut two pieces. So here are the two
pieces that I went out and cut so I can have one at the front and one at the back to hold the wheels
at the bottom of my little wagon tray. Now if you don't have the dowels or the stakes if you just
chain together three tumbling tower blocks for each side that should work as well or you could
use your dowels. So once you have your piece all cut what you want to do is drill a pilot hole down
into the side and this will just allow the screw to screw in those wheels when you get to that point.
So I'm just going to go in about maybe a half an inch to three quarters of an inch with my drill
just making sure I have a little hole there to align my screw with when I add my wheels and you
want to make sure you do this for both of the pieces. So now that that's done what we're going
to do is add them to the bottom of our crates. So I'm just going to add a line of the wood glue
and add some of that wood hot glue on there and I'm centering each one of these at the first and
last crate in the very center. You do want to make sure the ends are lined up with the edge
of the tray as shown here so everything will be nice and even at the end. So now that your wagon
is all assembled I'm protecting my work surface and I'm going to be staining this with my Jacobian
stain my very favorite stain and I am just going to be adding that to the crate. Now I like to start
staining on the inside first. It has the most intricate cracks and crevices I like to work my
way into. Now I use a little piece of towel to stain them. Now you could use a sponge brush or
you could use a paintbrush to get into all those nooks and crannies if you need to but here is the
entire inside all stained and we want to do the outside as well. So here is the entire crate
assembly all stained on the inside and out and very important I like to follow up with a paper
towel to wipe off any excess. This speeds up the drying process and also it just ends up looking
better in my opinion and now I'm going to sit this out to dry for about an hour or so.
So here is my nice assembly all nice and dry and ready to go. So for the wheels we are going
to be using a couple of these toy motorcycles from the Dollar Tree toy section. So these are
easy to take apart we're just going to snap them apart and as you can see the wheels just pop out
you just have to kind of wiggle that assembly back and forth and it pops right out and you can remove
that wheel. Now we're going to do this for both of our motorcycles then we're going to set those
to the side and to us to adhere them we're going to be using some screws. So I decided to go with
some three quarter inch number six wood screws you could use nails if you like I'm just using
what I have on hand. So what I like to do is add my screw to the wheel first and screw it all the
in first then I like to add it to the pilot hole and then screw it all the way down. Now you don't
want it super tight you want it with just a little bit of flexibility there but you're going to do
this all around the entire box and as you can see here here are all four of the wheels and as you
see you want them to be able to turn slightly so they're not too tight and here it is all four
wheels are assembled to our little wagon piece super easy. Now to hide those screw heads I'm just
taking some black acrylic paint and I am dabbing it on each one of the screws now I'm doing this
in two coats letting them dry in between the coats. Now once that's done we are going to add
our rope now I decided to go with the Dollar Tree nautical style rope here so I'm just going to tie
a really big knot at the very end and just pull it really tight and I'm going to cut a piece that's
probably about maybe four or five inches you can cut it as long as you like but I found that four
or five inches was just about right for this project. So to adhere it all I'm going to do is I'm
going to add some hot glue to the bottom of the wagon just add a generous amount there and then
you want to place the end of your rope right into that glue and then to add a little bit of security
you could put a couple of staples through the rope into the bottom of your wagon piece
and this is nice and secure now and as you can see it has a little pull string on your wagon
and it is good to go and ready to decorate. Now I'm just going to trim down that rope at
the end real quick and seal it up with some hot glue this just makes sure it doesn't fray
so when you're ready to decorate just grab any embellishments you want to you could add beads
you could add the tea light candles candle holders all sorts of florals and greenery
it is all up to you just have fun with it and here is the wagon on display and I have to say that I
am so thrilled about how this turned out. Now for this display I grabbed some sweater clippy pumpkins
from the Dollar Tree and I added them to three bunches of greenery from Ikea and the little
motorcycle wheels worked perfectly for this wagon and bring this sweet fall look together. Now I do
love pieces with so much flexibility to decorate them in several ways and by just removing the
little pumpkins it will make a really super sweet neutral decor piece. Now another way to decorate
this is to add a variety of bright fall mums to the wagon and I think these colors look so
amazing with the wood stain on the wagon and the accent beaded trim is a super cute accent.
I really love this combination. Now for this version I added some eucalyptus some pumpkins
and some berry stems. I think this is really so refreshing and like the other versions you
can switch it up and enjoy this piece year round. Now I really do hope that you give this
really easy project a try. Now this project is a wood pumpkin display stand. Now we're going to need
one one by four piece of wood from the Home Depot and these are eight foot long and only three dollars
and fifty five cents at my store. Now we're going to cut the piece down and we're going to cut
one piece at 11 inches. The second piece we're going to cut a little longer at 15 inches.
Now the third piece will be just slightly longer at 18 inches and the final piece which is the
longest is 21 and a half inches and most Home Depot stores will cut these for you.
So I went ahead and marked all my pieces so I can keep track and that you guys can follow along
easily. So what I'm going to do is lay all three of my pieces out here as shown in this order. Now
to make sure that they are even I'm first of all going to turn them face down because we'll be
working with the good side facing down. Go ahead and grab that carpenter square because that will
make sure that the bottom of your piece is absolutely even and that your pieces are standing
straight up. Now to adhere the sides of these together you could use the wood hot glue or you
use the wood glue before this project. I'm using wood hot glue because it is fast and it's only
temporary since we will be adding screws. So as you can see I ran a bead of glue along the side
of one of those planks and placed the longest piece in the center. I'm going to do the same
thing on the opposite side just making sure that middle plank is sitting on top of those two as
shown here. Now to reinforce that seam I'm running a bead of that wood hot glue down the back along
both seams of that long plank. So now that we have our wood piece assembled we are going to grab
that 11 inch piece. Now this is the base on which our three plank set will sit on so I am going to
center this in the middle and the sides on that 11 inch plank just to make sure it sits nice and even.
Now once you find out the center I'm going to take my pencil and I'm going to trace the outline
of the bottom of those three glued together wood planks. This will make sure your placement is
accurate and here is the outline of all three planks. Now what we need to do is we are going
to be screwing these to the base so I decided to go with the number six two inch wood screw for
this project and I'm going to be using three of these. Now the first thing we're going to do is
drill some pilot holes in that base and we're going to use our traced wood pieces to find the
center of each plank and drill a pilot hole down the center. Now as you can see there's a hole in
the very center of each plank so you won't have to do any guessing games to make sure you get that
screw in the right place. And now that we have that guide all ready to go we can actually adhere
our standing planks on top of the base. So what I'm going to do is use my wood hot glue for this
and I'm just going to add some wood hot glue to the bottom part of the standing planks and line
it up with your outline perfectly in place and make sure that it is standing there very straight
and secure and just press down for about 30 seconds or so until that bonds. And here is the bond
temporarily all ready to go. So we have our guide at the bottom with the three pilot holes and I'm
just going to take one of those two inch screws and I'm just going to hand thread it into each
one of the holes so I can secure those standing boards on the base. And I'm just going to take my
drill and I'm going to drill each one of them in until it's nice and flush with the boards.
And here are all three screws all screwed into those standing boards and now your entire piece
is solid. So I'm removing my guide measurements and now the piece has the full assembly that we'll
need for this project. So now is the fun part time to stain and of course I am using my favorite
stain by Minwax. Now I'm just going to apply this in one nice even coat. You guys can see how
this is why I love this stain. Look how beautiful this color is and on these cheap cuts of wood it
turns out so amazing. Now you can stain just the front side of this or you can stain the front and
back. I decided to stain both sides of my project but look this is the result of the stain. This is
the back here and this is the result of the stain and it looks absolutely gorgeous. So now of course
we're going to follow up now with our paper towel and remove all of the excess and make sure it's
nice and ready so we can have it dry really quickly. And now take it outside to dry for about
an hour or so. Okay it's been about an hour and now our piece is ready to work on and embellish.
Okay so the first thing we're going to do is we're going to start working at the top and we're going
to be using some of these branch stems. We're going to add these for the tops of the stems for
our pumpkin pieces. Now I picked this up from the Dollar Tree in the floral section so definitely
grab some of these if you see them. So I'm going to pick out three stems that coordinate with the
colors and all I'm going to do to add these is add them with some wood hot glue. You just want
to make sure you add a generous amount and press it firmly at the top of that wood piece. Now when
you do press it down definitely remove any glue that oozes out. You want this to be a really neat
and clean project and it has a high end look in the end. So here are all three of my pumpkin stems
all nice in place on top of our wood planks. So to give it just a little bit of distressing I am
taking some 60 grit sandpaper and I'm only sanding on the edges of the planks of the wood. This
just gives it just that slightest touch of wear that gives it a little bit more character and this
is optional but I love how this looks on this project. Now after that's done we need to make
a hanger for a wreath that we plan to hang in the center of this. So to put a hook on there I'm using
this hook that I got from Amazon. These come in a large pack really inexpensive. I'll link them in
the description box below. Now if you don't have any other hooks you can definitely use the hooks
from the Dollar Tree and just coordinate them to match but I'm going to be using this larger hook
because it accommodates an eight inch Dollar Tree wreath which is perfect for this project.
Now for the placement of the hook I decided to go eight inches down from the top of the longest
plank but you definitely can decide where you would like to put your hook on what you decide
to hang on your pumpkins. So once I decide the perfect placement I am just going to put a few
dots of hot glue on the back of the hook to place it on the board. Now this is in no way going to
secure it in place this just holds it while I put the permanent screws in place and keeps it from
shifting around so it's a good temporary bond and then I'm just going to take my screwdriver and
screw in the two screws that come with these hooks and secure that hook in place and here it is all
mounted and ready to go. So now we can start adding our colorful embellishments. Now I have some of
these maple leaves that I picked up from the Dollar Tree. These come in a 50 pack and all kinds
of assorted colors. If you want to go with that really bright fall theme these would be perfect
and I also decided to go with some burlap ribbon. I have this small burlap ribbon that I had in my
stash and what I'm going to do is just tie a small bow really easy. I just make one loop,
turn it around and then back under. Really easy quick bow and I wanted to make some small bows to
put on the stems of my pumpkins. So once I trim them down all three of these little bows are ready
to go. So now all I'm going to do is add a bow at the base of each one of the stems of my pumpkins
with a tiny dot of hot glue and here are all of those in place and I decided to go with a neutral
color so it'll match all of my interchangeable decor. Now for the wreath I decided to use this
wreath. Now I have made this wreath in the past DIY. I'm going to use this to customize this project.
Now if you're interested in making this wreath I will link the tutorial in the upper right hand
corner of this video and also in the description box below. Now this wreath does use an 8 inch
wreath from the Dollar Tree and eucalyptus from Walmart. Now what I decided to customize it into
a fall decor is just to use some clippings from some fall colored greenery and foliage that I had
on hand. I'm using the clippy pumpkins from Dollar Tree. I'm using some little fall colored florals
in there and just blending them into this green base for my wreath for a really vibrant pretty
fall decor. Now for the leaves what I did is I put one of those little sticky dots on the back
that are removable and then I just put one under each one of those bows and just pressed it firmly
against the wood. This way you could take it out and interchange that as well. Now as a final touch
what I wanted to do is add some of those little corkscrew little spirally things you see on the
tops of pumpkins all the time. I always see that in decor. So I used this wire that I picked up
from the hardware section from the Dollar Tree a while back and to make the corkscrew I'm just
wrapping that wire around a pencil. I'm using a piece probably about 12 to 18 inches long and I'm
just going to wrap it around till I have this little corkscrew and then I'm going to cut it in
half because I want these corkscrews to be maybe about two and a half to three inches.
So once you have your little corkscrews you're going to make sure you have three of them,
one for each one of your pumpkins. And now all you have to do is just add it to the base of
your pumpkin. You can add this with a dot of hot glue or you can wrap that wire around the base
to hold it on there as well. You could do it whatever whichever way you feel like you want
to do it to your project whether you want it removable or not. So I've added one of the
little spirals to each one of the tops of the pumpkins. And there you have it such a cute
wood piece that you can add to your display for your fall decor. Now I love the staggered
pumpkin design and the many ways you can choose to accent those stems at the top.
And I really love the wreath colors they get me in the mood for fall with all those warm colors
and the light distressing is subtle but it's perfect for this piece.
Now I love this wreath and it's great but you can hang just about anything on that little display
hook. Now you can take one of the fall decor boxes and fill it with your favorite fall florals. I
think this is super cute and it can be changed out with the seasons as well.
Now I really hope you love this one too. Now another take on the wreath is to go more neutral
with the colors and enjoy this awesome display piece. Now with a simple swap of the leaves up top
and the embellishments on the wreath you have a completely different look. This is definitely a
must try. Now you guys both of these wood DIYs were so much fun to create today and I hope that
I have inspired you. Now I do love each of them but let me know in the comments which one was
your favorite today. Listen if you love DIYs on a budget please give this video a thumbs up and
share this video with your friends. Make sure that you're following SheSoCraftyEE on Facebook,
Instagram, TikTok, and Pinterest for the latest news, sneak peeks, and giveaways. Now if you like
videos like these and you don't want to miss the next one make sure you're subscribed by clicking
that subscribe button below or just click my SheSoCrafty logo on your screen and make sure
you hit that bell to be notified when the next DIY goes live. It's absolutely free. Thank you
so much for watching and I'll see you all next time.
