*NEW* ALL DOLLAR TREE DIY | Wood FARMHOUSE Home Decor | Sconces | Planter | Easy DIYs You MUST TRY!

She So CraftDee
16 followers
3 Video Views·Apr 19, 2023
Hello Crafty Family and welcome to another tutorial by She's So Crafty.
For today's DIY project, we'll be creating a high-end inspired hanging wall sconce made
with mostly Dollar Tree items and other inexpensive wood accessories.
This design may be familiar as its concept was taken from my original lantern project
that I designed and created last summer.
This piece can be displayed in two ways with lighting as options.
Even though I opted for a weathered rustic finish, you can paint and decorate these in
different ways to fit into a modern or even boho style decor.
Before we start, I have to say, hey hey to all of my subscribers and if you're a new
visitor to my channel today, I hope you consider subscribing as well and stick around to enjoy
this craft and all of the different ways that you'll be able to decorate and style this
in your space.
So now, let's just jump right into the project.
Now for this project, you're going to need one set of these Hot Wheels racetracks from
the Dollar Tree.
We're going to need one chain plant hanger from the Dollar Tree.
We're also going to need one of these large bamboo rings from the Dollar Tree and we're
going to need one of these wood finials and you can get these in a two-pack from Lowe's
for $2.98.
Now we're going to start off with our racetracks, so just go ahead and remove all of the accessories
that come with it and all of the packaging.
Now it's very important before we start working on the racetracks, you want to sand them down.
I'm using some 150 grit sandpaper and you do want to sand both sides of it, just removing
the sheen from the racetracks.
This will enable any paint that you use to adhere well without cracking.
So now that both sides of our racetracks are nice and sanded, follow up by cleaning them
thoroughly and I like to use rubbing alcohol and this removes any grit or sand from the
surface.
So once both of those racetracks are nice and dry, we are going to go ahead and grab
our bamboo rings.
So I'm just going to go ahead and open it and remove the larger bamboo ring from the
package.
This is the one that I'll be using for this project and this ring is about 7.8 inches,
so this is the larger one and we'll be using that.
Now if you can't find the bamboo rings, a good substitute may be to use the smaller
burner cover from the Dollar Tree if you wanted a solid top or you can even go to your craft
store and get some embroidery hoops and the inner hoop would definitely work for this
project as well.
Now I'm going to take a piece of scrap paper and I'm just making an imprint of the outline
of that bamboo ring on there.
Now if you can't see it, you could just go ahead and trace it onto the paper as well
the same way.
Now once we trace it on, I'm going to go ahead and cut it out with a pair of scissors so
I have a template of that circle.
Now once we have that circle, I'm just going to fold it in half and then fold it in half
again until I have four quarters.
Now those quarter lines will determine where I put my markings for four equal sections
and I'm taking my sharpie and making a mark at each one of those sections to make sure
they're marked really nice and even.
Now if you can't really see it, you can go ahead and follow up and darken those lines
with your sharpie because you definitely want to make sure you're able to see them when
you start applying your erase tracks.
So now that we have all four of our corners all nice and marked, what we're going to do
is add our erase tracks.
Now what we want to do is determine whether we want the ridges on the outside or you want
the smooth side on the outside.
It's absolutely your choice, but for my project today, I am going to have the ridges on the
outside.
Now you want to line up each edge of the erase track with the markings that you have marked
on your bamboo circle.
You're going to put one on first and then the other one right on top.
Now here I'm just doing a test fit just to see if it will fit like I want it to and if
it's long enough or I need to shorten them.
So once I decided it looked okay, I am going to go ahead and trim off the edge where that
little piece is and the little hole is.
I'm just going to trim off right above that and that's on both sides of the erase track
so I'm going to trim it off both of those erase tracks at each end.
Now once both of the erase tracks are nice and trimmed, here is what they will look like
and now we can move on to getting these to fit our bamboo rings properly.
Now when we set the bamboo ring against it, we notice there's a little gap because that
ridge causes a gap.
So what I'm doing is marking the edge where the bamboo ring lays on top of the erase track
which is about a half an inch and then I'm taking some wire clippers and I'm snipping
off about a half an inch of that ridge so that part of the erase track will be flat
and when you apply your bamboo ring against it, your bamboo ring will actually lay flat
against it without a gap.
This is what we want to have, so we're going to do this for all four ends of our tracks.
Now I'm going to be applying these with wood hot glue but you could use E6000 but we're
going to follow up both methods with the staple gun so it doesn't matter which method you
choose for this project.
So I'm going to add a line of the glue to that cut end of my erase track with the ridges
facing out and lay that bamboo ring on top and clip it in place with one of these dollar
tree clips.
Now once that's in place, I'm just going to bend it around to the other side of the track
making sure I add more of that glue and sitting it on the inside of that bamboo ring with
a clip.
Now you do want to make sure when you do apply this to the bamboo ring, you want to center
that dot that we made on our erase track to make sure everything will remain nice and
even throughout your project.
So once that first arch is on there, we are going to do the same thing for the other arch.
We're just going to go over the top and apply it the same way.
So now that all four of the corners are attached with the clips, we can move on to the next
step.
Now what I'm going to do now is we are going to determine what we're going to put in the
center to hold our candle or our pots.
Now over time, I've been collecting different lids from peanut butter jars, mason jars,
creamer jars or whatever kind of jars that I have and I'm just going to test fit to see
which one will work for the holder for my sconce piece.
So I tried first the regular mason jar.
Now that one fit nice in the middle, but it was a little small.
And then I took the peanut butter jar lid that was a little bigger and it actually would
work with some of the faux candles I had.
And then I found that the other white one was a little big, so I decided to go with
the peanut butter jar lid and this one was about four inches wide just for reference.
Now I'm just going ahead and fitting it inside just to make sure it would lay the way that
I wanted to, that it wouldn't interfere with the structure of the sconce.
So I'm just making sure that everything fits really well.
Now we are going to go ahead and grab our finial because the finial will be going on
the opposite side of our lid.
So if we put it on like it is, that nail would stick right through the lid and we don't want
that.
So we're going to go ahead and remove this little screw from this.
Now this is a dowel screw.
Don't throw this out.
Keep this for projects because it definitely will come in handy.
Now we're going to be replacing this dowel screw with a two inch wood screw.
This is a number eight two inch wood screw and we're going to be using this so no screws
will be exposed in our project.
Now the first thing we're going to do to attach is we're going to go ahead and take a drill
and drill a hole in the center of our jar lid.
Now I'm using a 7 64th inch drill bit for this.
And then once our hole is drilled right in the center, what we're going to do is take
our two inch screw and we're just going to hand screw it in from the inside, poking out
of the backside of the lid.
And we're just going to hand tighten this all the way down.
Now once that is in place, this is where we're going to put it inside and the finial will
be on the opposite side.
But we want to make sure that the hole is deep enough in the finial for the screw.
So I'm just going to go ahead and drill in that same hole down another inch just to make
sure that two inch screw will fit inside of our finial.
So now what we're going to do is we're going to make sure that our race tracks are nice
and centered at the top.
Now you really don't need to put a pilot hole in the center there, but I'm going to do it
since I already have my drill handy.
I'm going to drill a pilot hole right through the center of both of those race tracks and
that way we have a point to know where we're going to attach our lid piece.
So we're going to apply the lid piece from the inside going through both of those holes
through both of the race tracks.
And then we're just going to screw it on, we're going to hand tighten it on until we
get all the way down until about an inch of that screw is exposed on the other side.
Now we just take our finial and screw it on to the exposed screw.
We're going to hand tighten it as much as possible and then use our drill to drill the
remainder in until it's nice and secure.
So here is the finial all nice and secure and you see there are no exposed screws and
it's this is what you want your piece to look like, very clean and professional.
So now what we want to do is work on the connection where our race tracks join our bamboo.
This is where we are going to take our staple gun.
Now I'm just putting two staples in each one of the ends of the race tracks as shown here.
These staples do not go through the other side so this is perfect.
We're going to staple this all the way around applying two staples at the end of each piece
and this is what it will look like.
So these are nice and secure, nice and secure to your bamboo ring.
So now what we're going to do is we are going to add some beads.
Now these are 16mm beads that I have cut in half myself.
Now I have a quick demo if you'd like to see it.
I will link it in the upper right hand corner of this video and also in the description
box below.
But these are also available on Amazon as well if you'd like to purchase them instead.
Now to apply them I'm just going to use my same wood hot glue but you could use E6000
or Gorilla Glue, whatever glue that you like.
And then I'm going to start applying those beads along each one of the tracks.
Now I did find that putting about four beads evenly spaced on each one of the tracks works
for this project.
So I'm going to do this all the way around until we have the four beads in place on each
one.
And now what we're going to do is add those same half beads to that bamboo ring.
Now we're going to add these all the way around again using your glue of your choice and then
just adhering them right next to each other all the way around.
Now the bamboo ring is a smaller width than your beads so that's okay if your beads overlap
the edge.
And once that dries here are all of my beads all applied around that bamboo ring and I
love how this trim is coming together.
Now I'm just going to take a very loose and soft bristle brush and brush away all of those
hot glue webs.
You definitely want to make sure they're all removed before you do any painting because
they will show up in your final project.
Now I'm also going to grab that plant chain.
Now my plant chain is black but I did want to paint it a lighter color so I am going
to paint this at the same time that I paint my frame for my hanging sconce.
Now I am going to apply one to two coats of the Zinsser 1-2-3 primer.
This is a very opaque primer and will cover up all of the colors on these pieces.
So once these have set out to dry about 30 minutes these are ready to handle and to apply
our final coat.
So here is our chain all nice and primed and it's ready to go.
And here is our sconce piece.
Now when you spray paint you notice some areas might be missed but anytime I work with these
racetracks I always follow up with some chalk paint to get inside all of the creases of
the ridge and also the inside areas you may have missed.
This is the perfect thickness for your paint to actually cover up all of those colors.
Now I am going to paint this a different color but I still if you wanted to actually keep
this white you definitely can touch this up with your chalk paint and then go over it
again with your final color whether it be white chalk paint or white spray paint but
you definitely want to hide all of those orange areas.
It definitely ends up being a nice clean and professional project in the very end.
So here is all of the areas of my lantern sconce piece all nice and covered and you
want to allow this to completely dry.
And now everything is nice and dry and I'm going to put my final coat on which is this
khaki color.
You could use acrylic paint for this but I love to make it easier so I'm going to be
using this Krylon satin khaki color that I got and I'm going to cover this with one nice
coat of this paint.
Now after about an hour under a fan drying this is what that coat looks like.
It doesn't have to be perfect because I am going for a weathered look but if you wanted
it to be totally solid I would put two coats instead of one.
Now this is one coat on this and this works perfect for my project that I'm doing today.
So now what I wanted to do is give it a weathered look and I'm going to use some diluted white
acrylic paint but before I do that I took another look at it and I figured I wanted
to add another trim where the beading was.
I'm always changing up my strategy here.
So what I did is I grabbed some nautical rope from the Dollar Tree and I'm going to be using
this to actually add a trim right on the top of my hanging sconce piece.
Now I'm going to be applying it to the inner bamboo side right on top of that beading so
it's nice and even as the trim.
So what I like to do when I start adding my nautical rope I always like to hot glue an
area near the end so when it dries and you cut it it'll be nice and straight and even
and it'll also keep your nautical rope from unraveling.
So once you do cut it and you have a nice flat end you can start working with it and
adding it to your project.
So I'm going to start laying it on the inside edge and I'm going to apply little bits at
a time.
I'm going to start adding that rope to the inside pressing it in place and allowing it
to dry and I'm going to continue this process all the way around the top edge of my sconce
pieces with that wood hot glue.
Now you do want to press it and just make sure it's nice and bonded and even and complete
this all the way around.
Now once you reach just about the end what we're going to do is find the end and again
add more hot glue to that area where it will end and connect to your end piece and then
once that dries you can use your scissors and cut it nice and even so it'll butt up
nice and clean to the other end.
And once you determine it is the right cut add more glue and then you can press it in
place making sure those ends are perfectly matched up just squeeze them together and
kind of blend those fibers in and you have a nice clean finish to your trim.
Now everything looks nice and clean I'm so glad I decided to add the nautical rope it
just adds another elevated element to the design and it does continue to still sit nice
and even if you'd like to have it that way.
So now we can actually start on our weathering technique.
So what I like to do is take a little bit of white acrylic paint and a chip brush and
I'm adding a little bit of water to a little bowl here this will dilute my acrylic paint.
So I'm going to dip my chip brush into the acrylic paint and mix it in so you get a nice
watery mix and I'm going to start applying this to my lantern sconce piece in sections
and as I add it I'm just going to wipe it away and add it and use a brush all those
combinations until you achieve the perfect weathered look that you would like to have
on your piece.
Now I'm going to continue this process by adding the diluted paint wiping it away brushing
it in until I achieve that look and this is what all of the forearms looks like and now
we're going to do the inside and the top of the lantern as well.
Now I'm loving how this weathered look is turning out perfect.
So now once it's all covered just let it completely dry and here it is all nice and dry and ready
to go.
Then here are our chains as well.
Now we can remove some links and I did remove several links from this to your desired length
but I'm going to show you how I did the hooks.
So the very end of the hooks I am just going to squeeze the end together where that clip
portion lays flat to the back as shown here and then I'm going to open the hook up a little
bit.
This will allow the hook to wrap around your beaded edge trim without catching on anything.
It perfectly fits in between two beads.
You can hang it on the outside of the beads or you can reverse the hook around and hang
it on the inside of the beaded trim and that will hold your sconce piece in place.
Now I didn't show it but I did end up painting these chains that khaki color as well.
So definitely do that as well to blend into your project.
Now for the hook for the wall I'm going to be using one of these hooks from Dollar General.
These were $1 and these hooks come in a white color and they also come in a black color
so you can choose whichever one that you like.
And also they sell them at Dollar Tree for $1.25 and they're a little larger but they
definitely will work for this project as well.
Now as far as decorating you can add anything you want.
You could use some small potted plants, you could use some round wreath greenery if you
like to, you can add a candle to the center.
There's so many different options and these are just a few that I'll show you but I am
going to set this up and see how my final project turns out.
And here it is you guys, a beautiful sconce piece that you can hang up and display in
your space.
Now for this option I've chosen greenery wreath along with an LED candle as an accent.
And this finial has been beautifully finished to match the beaded sconce and your guests
would never know that these were racetracks.
Now another option is you can add a small potted plant inside too.
Now the little holder at the bottom is awesome for this option and allows you to use real
or faux plants as an accessory.
Now this option would be perfect with all of the spring greenery right now in the stores.
And check this version out with the long stem greenery flowing out of the sconce.
Now I do think this is especially beautiful since you can really get creative with real
plants as well as create an awesome display.
Then all you have to do is remove the chain and flip it over for a classic table lantern
look.
Now for this version I've used the holder lid as the perfect spot for mounting a tap
light that you can get from the Dollar Tree.
Now this will perfectly illuminate all of your decor that you choose to place inside.
Now I really do hope you enjoyed seeing this multi-purpose style sconce project today and
I hope you have as much fun as I did creating it.
Listen if you love DIYs on a budget please give this video a thumbs up and share this
video with your friends.
Make sure that you're following SheSoCraftyEE on Facebook, Instagram, TikTok, and Pinterest
for the latest news, sneak peeks, and giveaways.
If you like videos like these and don't want to miss the next one, make sure you're subscribed
by clicking that subscribe button below or just click on my SheSoCrafty logo on your
screen and make sure you hit that bell to be notified when the next DIY goes live.
It's absolutely free.
Thank you so much for watching and I'll see you all next time.
