Classic VW BuGs '55 Beetle Ragtop Road Trip Garage Barn Find Resto Project Pt. 5

Chris Vallone
219 followers
Mar 12, 2015
http://www.ClassicVWbugs.com
This is a multi part series on a 1955 VW Beetle Ragtop Project Garage Find that we took to the road to Rhode Island to BUY.
This is the March 2015 Update!
Hey guys, Chris again from ClassicVWBugs.com and in this video I want to give you an update
on a 1955 Ragtop Beetle that we are putting together for my good friend Lucky Larry.
You guys may remember a couple years ago Larry and I went out to Rhode Island to see this
1955 Ragtop that was basically in a garage for, I don't know, 30 some odd years and yeah,
we went ahead and purchased that car and we got the car back from paint and we are actually
assembling it right now.
So I just want to give you a little update and show you what we've accomplished so far
and what we plan on doing with the car and having it ready for this show season.
So let's take a peek.
Okay so here she is looking nice, looking nice and check it out.
It looks nice, red rims, I know it's kind of flashy right now but don't worry we're
going to be putting an outside beauty rim that sits on the outside edge of this rim
and then with the hubcap on there that will look pretty sweet.
We've done that color combination before so it looks pretty damn good.
So as you can see we've been working on most of the exterior, we've got our running boards
on.
Again, I do recommend try to go with the German running boards just because they fit better,
they look nicer but even over the years some suppliers, they're saying German running boards
and I don't know, I just kind of think the quality is starting to dip a little bit but
I still always go with the stainless moldings on these cars.
I know they didn't have stainless back then but it just looks that much nicer you know
especially when you're going to be showing the car.
So bumpers, Wolfsburg West, I think they still have the best bumpers.
There are other suppliers out there that have stainless bumpers but I still religiously
am getting my bumpers from Wolfsburg West.
The nice thing about Larry's cars is that we did have the body off the chassis before
we mounted it back down.
You know we resealed it and you know I've seen, I've had videos out there showing you
where I reseal and how I hold the seal in and using you know new body rubber mounts
and whatnot but the nice thing about doing a body off is you can attach the motor onto
the chassis before you lay it down, lay the shell back down onto the chassis and when
you have the motor connected to the tranny, you can have all the tins in place, everything
all hooked up with that motor and when the shell comes down, it fits like a glove.
So there's Larry's motor that we rebuilt.
It's a numbers matching car guys so it's going to be pretty killer when it's all done.
One thing I want to point out and which many people ask me are about these engine lid seals
here.
If you can see this here, you see I get these pretty, these are wide seals, they're nice
and wide and you know there's a guy on the Samba that actually sells these.
I like these seals because the seals that you get from your general parts supplier,
they tend to be a little bit smaller, a little bit thinner rather in diameter and then what
happens is a lot of times they curl up on the bottom and then when you close the lid
and over time that seal stays curled, it kind of doesn't look nice, it doesn't have a nice
finished look to it when you're showing the car especially if you have to have the lid
open and you've got to present the motor and what not.
So this is a thick seal, they're not cheap but you know again it really looks nice on
these earlier bugs and they usually give you a three piece seal kit you know for the front
hood, above the cowl and then over here in the rear engine compartment.
Okay so as you can see we have not tackled much of the interior yet, we still have a
lot of the parts kind of stored in here, a lot of times bugs act as a closet you know
in the meantime as we are working on it you know when we go to jump on it we'll take everything
out of course but as you can see we really haven't tackled the interior yet, we just
put the wiring harness in so you usually want to do that first before you start putting
anything on in the interior.
We haven't tackled the doors yet, you've seen my videos on assembling doors and you know
that can be a job, it can take time and it's something that you're going to want to you
know really take a deep breath and be patient with, if you get frustrated take a step back.
So doors usually I mean they used to take me a day to do one door, now I can do two
doors in about half a day.
So but as you can see, Larry's car if you remember his dashboard had a lot of accessories
on it, there was little lights, he actually had the rare Denny gas gauge that's going
to be going back on to this dash so this is going to be a very highly accessorized 1955
Beetle.
Okay so here's the front of the car, you see we got brand new headlight assemblies, you
can get those from Wolfsburg West, again the front bumper Wolfsburg West and this is a
late 55, so as you see this had the bullet front turn signals, that's when they just
started doing that in America only, in Europe they would have still kept the semaphores
and this is also the time where they went to the honeycomb or the so-called snowflake
taillights that basically came out in late 55 for the American model Beetle and that
went until 1961 with these taillights.
The bullets, as you see in the front, they lasted until 57 in America and then once they
went to 58 and they got rid of the oval window, they went to the big square window, then the
blinker went to the top of the fender.
Okay so as you can see we started inserting the wiring harness, I still have to put all
the switches on and the fuse box and whatnot, but very clean in the front, again it's going
to be a show vehicle and Larry's car is going to be really stand out when it's all done.
Some people ask me about the VIN tags as you can see here and yes I do remove them and
I do re-spray them, I'll clean them up and re-spray them because most people want to
be able to read that VIN number as you can see, that's in right there, see the long rectangular
section there, you see the 1, the dash, the 0, the 9, that's your VIN number.
Now that number again has to match the number on the chassis, and then there's the body
number underneath.
A lot of people ask me what the VIN number is for their Beetle that they're selling and
they'll tell me this number underneath, the body number, and sometimes when they tell
me that they don't, they just don't know either that the VIN is stamped into this tag or that
tag is missing.
So if you're ever wondering if the body and chassis match and maybe somebody might have
popped this tag off at one time and put another tag on a bug, you can match up these numbers,
the body numbers and the VIN numbers should fall within the same month.
That's how you know it's a good possibility that everything matches.
Larry also has the correct 4-tab hood for this car.
People ask me, Chris, what is a 4-tab hood?
What the hell do you mean by that?
But the 50s models Beetles had a 4-tab hood.
What I mean by that is if you go up, here's your logo, right?
That's a 4-tab logo.
There's nothing raised on it.
Many times you'll see earlier cars have a raised section here for the emblem.
That's usually like a 63 and later model.
Earlier than 63, they had a very similar looking logo here, the VW logo, but holding it with
3 tabs, not 4.
I'll show you the 4.
You can see there's your 4 tabs.
So you know you pretty much got the correct emblem and the correct hood.
Also, these models, they have a prop here on the side.
I don't know if you can see this.
This is something you've got to look after.
The prop to hold the hood up has its own mounting bolt, mounting hole, and mounts to the wheel
hump there.
There are later 4-tab hoods, like the 56 and later, where the prop mount here doesn't bolt
there.
It bolts to the hinge.
The first bolt there on the hinge.
So you've got to see a difference.
Make sure you've got the right hood.
Many people will sell their bug stating that they've got the correct 4-tab hood, when actually
they don't.
The 55 and earlier had the mounts separated from the hinge.
Okay, so there's a short update.
A couple tips I threw in there for you to show you how we are progressing with the Lucky
Larry's 55 Ragtop Beetle.
This will definitely be a show beetle.
It's going to be standout and something that Larry's very much looking forward to.
He loves his sunroof bugs.
I think this is his first time ever owning something this old.
So good for him.
Larry's a legend in our eyes.
So we're going to make this killer for him.
So anybody have any questions?
You can email me, Chris, at ClassicVWBugs.com or visit my website, www.ClassicVWBugs.com.
Take care.
