Beginning Woodturning 101

Family Handyman
185 followers
6 Video Views·Apr 2, 2023
Mary Kehl talks about switching careers later in life, building a house and what's in her tool bag. https://www.familyhandyman.com/articl...
Every product is independently selected by our editors. If you buy something through our links, we may earn an affiliate commission.
People have been carving round objects on a wood lathe for centuries.
The tools have evolved, but the process is still the same.
You put a piece of wood between two points, and it spins, and you carve it as it turns.
Hi, I'm Joe with Family Handyman.
Today we're going to make a couple of easy rolling pins.
Let's get started.
Before we start making sawdust, let's talk a little bit about woodturning safety.
First up, you never want to have anything dangling.
No, take off all your jewelry, tie back your hair, and roll up your sleeves.
For spindle turning, you can wear just safety glasses.
But if you're bowl turning, you always want to wear a face shield.
And when you're sanding, protect your lungs with a dust mask.
Although you can turn any kind of wood on a wood lathe,
when it comes to spindle turning, you want to lean towards choosing hardwoods,
such as cherry, maple, walnut.
Exotic woods like purpleheart, mahogany, and ipe turn really well.
Anything with a tight grain pattern works well for spindle turning.
The first step in mounting the turning blank on the lathe
is to find the center on both ends of your piece.
Draw lines from corner to corner before attaching the spur chuck.
Next, we want to attach the spur chuck to the turning blank.
But before you do that, give yourself a hole right in the center on each end.
Then you just take your spur chuck, put it right in the center,
tap it in with a mallet.
Now that we have the spur chuck attached to the turning blank,
just simply slip the spur chuck into the headstock spindle,
slide the tailstock so your live center attaches directly to the center of your turning blank.
Setting the height of your tool rest is different for each tool.
For these carbide cutting tip tools that we're using,
you want to have your cutting tip directly in the center of your turning stock.
The distance between your turning blank and your tool rest will change as you turn.
But to start out, I like to put it about an inch away.
There are different turning speeds for roughing, shaping, and sanding.
Refer to this chart here.
Alright, time to start roughing this piece out.
I'm going to turn this square piece of wood into a round cylinder.
One thing to remember, always make direct contact with your tool on your tool rest
before it makes contact with the turning blank.
For roughing my turning blank, I'm going to set my speed between 900 and 1,000.
It's okay to take your time with this.
Don't be in a hurry.
Just apply even pressure with the tool,
moving it from left to right and right to left until it becomes a cylinder.
Once you get it to the thickness you want,
be sure to turn your lathe off before moving to the other half and continue rough turning.
This first project is going to be a French rolling pin
that's tapered on both ends with no handles.
But I first need to turn it into a cylinder first.
Now that I have the block turned into a cylinder,
I like to mark the center,
then I work one half of the piece until it's the shape I'm looking for.
Remember, this is a French rolling pin, so it tapers down on each end.
Then I copy the dimensions to the other half until it's symmetrical.
Using the detailing tool, I shape both ends to how I want them to look.
Then I move on to sanding the piece.
Alright, now I have it all sanded.
All I have left is add some food safe oil,
and then I'll cut the ends off with a saw.
A Japanese pole saw works well for parting off the ends.
Alright, I'm going to sand the ends and put some oil on there, and that one's finished.
We're going to move on to making a rolling pin with handles.
Just like before, I find the center on both ends of the turning blank,
then I attach the sprue chuck and mount it to the lathe,
then proceed to turn it into a cylinder.
Alright, now that we have this roughed down to a cylinder and sanded,
it's time to lay out for the handles.
First I want to find the center, and then divide that in half,
and that'll be the width of my rolling pin, and then the rest will be handles.
Alright, now that I have it all laid out, I'm going to start sculpting the handle,
only I'm going to switch tools to this round cutter.
Again, starting on one end, I sculpt the handle to how I want it to look,
and feel in my hand.
Once I'm satisfied with it, I copy it to the other side.
Remember to always take your time and don't be in a hurry.
Again, using the detailing tool, I shape the ends of the handles while creating a groove,
getting it as close as I can before it's ready to part off.
Now I have the handles all turned,
all I need to do is sand it and put some oil on it,
and then part the ends off, and we're finished.
Alright, that wraps up our turning project today.
I really like how this purple heart sets off this French rolling pin.
You know, for a beginner woodturner, this is really a doable project.
Now we're ready to make some pies.
For more projects like this, head over to FamilyHandyman.com
