This Ancient Technique Makes a Raised Bed Last Longer!

The Gardening Channel With James Prigioni
92 followers
30 Video Views·Mar 25, 2023
What's going on growers? It's James for Gioni coming to you live from Jersey.
Today me and Tuck are going to show you how to build a cedar raised bed and share with you
an ancient Japanese technique we are using to greatly extend the life of the bed. Let's go!
Me and Tuck are always trying to find new ways to get the most out of our garden
and while researching online how to make raised beds last longer we came across an ancient technique
known as shosugi ban which is basically burning or charring wood to make it last longer. First
let's build our bed. To make it simple we'll use three pieces of wood that are all the same length
then what we'll do is we'll take one of these pieces of wood and cut it in half. These two
pieces that we leave uncut equal size will make up the length of the bed and then the one piece
that we cut in half will make up the width. My wood is exactly eight feet in length so what I'll do
for the piece that I will cut is I'm going to divide that by two that'll give me four feet
then I'm going to subtract one and a half inches to give me 46 and a half inches and the reason
I'm going to do this is that's the distance from my saw blade to the shoe of my circular saw.
I need that measurement so that I could bump up a square up against the side of my blade.
This way when I make my cut I can bump it right against the square and get a good square cut.
If you have a drop saw you can disregard what I just showed you but if you don't have a drop
saw and you're using a circular saw and you're not that great at it this is a really good and
simple approach. Also always remember to measure twice and cut once. If you want you can build your
bed just like this but me and Tuck want our bed to be taller so what we're going to do is the
same thing that we just did two more times then stack those on top of each other and that will
make our bed much taller. Now we're going to cut some additional pieces these will act as braces
to prevent the bed from bowing out so I want these braces to be the same height as the bed
so what we'll do is stack three pieces up one against each other get that measurement which
is about 16 and a half inches and we're going to cut about 10 of these pieces because I want
to put some of these braces at the corners of the bed as well because this cedar wood is pretty thin.
I finished cutting all my braces I got five braces out of one piece of wood with just a
little bit of scrap that means it will just take me the two additional pieces of wood in order to
cut all my braces. To char the wood we're going to use a weed and garden torch and propane as our
fuel. Make sure when you're turning on the propane tank that you do it slowly or the safety will
prevent the propane from coming out. Then turn on the knob for the torch. When lighting the torch
you want to use a welding flint my torch came with one. First we will char the wood by setting
the flame to the wood in each location for a few seconds until we get a nice char. Take your time
with this and make sure you do it in a safe location. As you can see the wood is charring
really nicely and if you notice some of the boards where they want to stay lit the flame
I just like to tap it with my foot and that seems to put the flame out. We want to make sure that
we're getting the sides and the ends as well. Sometimes you'll notice that the ends take a
little bit longer to char than the faces of the board. Then after we're finished charring the
boards what we want to do is grab a wire brush and brush off the outer char. We want to make sure
when we're doing this that we go in the direction of the grain and we also don't want to push too
hard. We're not trying to cut into the wood we're just trying to remove that outer char. The first
time I did this on the first board that I tried out I used a brush with a handle because I thought
it would be easier but after doing it I suggest just holding the brush in your hand you have a
lot more control this way. Look how the burning of the wood brings out the grains. I think it just
looks so incredible. I love it. Next after we're finished using the wire brush we'll just knock off
the charred remains and then grab the broom and use that to brush off the excess. We finished
charring all of our wood and we brushed it off with a broom. Now what I'm going to do is remove
all the excess that I didn't get off of the broom. So to do that I'm going to use a wet rag. If you
want you can use compressed air too but I'm just going to use a wet rag. So we're just going to
wipe these all down. The wood is now cut charred and all cleaned off. Next we're going to use a
natural oil to help seal the wood so it lasts even longer. You could use raw linseed oil for this
but I have found something that I think is even better. This is called outdoor defense oil. This
exterior oil is made of 100% pure tung oil pine oil and zinc and is suggested to be used for your
raised garden beds. It says it's food safe and contact safe so we think this will be a great
option. You can use raw linseed oil if you want to. I just read that the raw linseed oil doesn't
prevent mildew and mold but this one does so we think it might be an even better option than the
linseed oil. Now we will apply the oil to the wood and give it time to be absorbed and to sink into
the wood and any excess that doesn't get absorbed after 40 minutes we'll just wipe that off. We'll
do this same process a few times. All our preparation is complete and now we can put our raised bed
together. It's best to put your bed together on a level surface so I'm going to build my raised bed
on a raised bed that I've previously built because they're all level. I'm going to use this 90 degree
clamp to hold the wood together while I connect it. I am going to be using two and a half inch
screws to connect the boards together. I want to make sure that I'm pre-drilling before I use any
of the screws. This will help prevent splitting. Now I'm just going to do the same thing I did
right there for the rest of the bed. There we go that one is finished. Now I'm going to do the same
thing two more times and then stack them on top of each other. Now we will take the pieces we cut
earlier and use these two on each corner to strengthen up the corners. So we'll put one this
way and then we'll put another one over here which overlaps the sides. This will attach the whole bed
together and really strengthen the whole thing. Plus it will it will give it a nice look because
this wood is pretty thin. It's only about three quarters of an inch thick. I'm going to use these
clamps to hold it all together for me just so I know that it's nice and aligned in the right
location. I'm all lined up. I'm going to put a clamp at the bottom as well. I'm going to pre-drill
and then put my screws in. I just want to make sure I don't hit the screws that I put in earlier.
Now I'm going to use one and a quarter inch screws to connect this together just like this.
We're going to do the same thing over here. We want to make sure that these pieces right here
overlap. There we go. That corner is all finished. Now we're going to do the same thing for the three
other corners. There we go. All my corner pieces are finished. Now what I'm going to do is I'm
going to measure the length of this and then get the center and then I'm going to get that center
piece and put in my center board. I think I'm going to put it on the outside because I like
the way it looks. And what I'm going to do is take this clamp right here and I'm going to clamp it
down just to pull all my boards together. Then I'm just going to clamp it on.
There we go. Last screw in. You can see how that helped to get rid of the gap.
We're going to do the same thing on the back side. There it is. The final screw. The bed is done.
Now all we have to do is just put it into place. Got the bed. Feels nice and sturdy now. I'm just
going to set it in place and then I'll just level it and then after that we'll be able to fill it
with soil. There it is. The completed raised bed. All I have to do is just finish filling it with
soil. I'm so happy with the way it came out. I mean look how striking the color is and the contrast
between the sun bleached wood chips and the bed. I think it just looks incredible. For the bed,
I used cedar that I got from Lowe's. I used cedar because in the old Japanese Shosugiban,
they would use the Japanese red cedar. So this is basically the closest thing I could find to
what they would use and I read that you can use other woods like maple, oak, even pine. So I may
try this process in the future with pine but I think for now cedar is the way to go. The issue
with making a raised bed out of cedar is that the cedar wood is expensive. That's why I felt like if
I was going to build a bed out of cedar that I wanted to make sure it would last a super long
time. That's what really encouraged me to try this process out. I know cedar does well with the
elements just as it is but I think by adding another layer of protection that this bed will
be able to pump out an insane amount of food. Not to mention how beautiful and striking it actually
looks. So these cedar boards are one by sixes at eight foot length. At Lowe's they costed $26,
well $25.98 for one of them. I ended up using 11 of them and if you want to make this same bed,
that's how much it's going to cost you. I also bought that raised bed protection, the oil,
that was another $50. So even though this bed isn't super cheap, I think it looks amazing.
It should last a really long time so I think it would be really fun to try out. So years from now
we'll be able to see how much longer this bed lasts than some of the other beds that I build
out of just common lumber. Like I mentioned earlier you could build a much cheaper version
by just doing one layer and not having to use all the braces and that could be a cheaper option but
I don't think it will look as nice as this when you have all the layers together with the pieces
at the corners and the piece of the center. I just I'm happy with the way it came out and I like that
it's not only beautiful but it's super functional. That's it video growers. Thanks for watching. I
hope you enjoyed it. I hope you got something out of it. Me and Tuck had a blast out here. We're
happy with the way the bed came out. We hope that you guys take the chance to build something like
this. Not only does it look cool, it was a lot of fun to do. I think I had a little more fun than I
should have burning the wood. Overall I think it looks great. We'll be able to grow a lot of food
and that's really what the goal is. So we had a blast out here. Me and Tuck wanted to mention
to check the merch out at jamespergione.com. Grab a sweatshirt, grab a t-shirt now that we're headed
into spring. It's so close we could taste it. We also wanted to send a thank you to one of our new
channel members, Jack McCarthy. Thanks for being a part of Team Grow. Thanks for having your hand in
everything we're doing back here. The new beds and you know everything we grow. Tuck and James
will be back at you again real soon. We out!
