Flow Through Worm Bins Explained: A Different Type of Vermicomposting

Epic Gardening
119 followers
4 Video Views·Mar 20, 2023
What's going on everyone? Kevin from Epic Gardening here.
And today we're taking a look at a different style of worm bin.
You have your stackable tray systems like I've done videos on in the past.
And then you have designs like this,
also known as continuous flow through or CFT systems.
So first of all, we're going to go ahead and compare and contrast on the white
board. What is the difference between these two systems?
Why you might choose one over the other.
Then we're going to go over the full setup of your very first CFT system if you
so choose to experiment with this method. So let's go ahead and get to it.
All right. So before we get into the flow through system,
let's talk about tray systems versus flow through systems.
So you have an understanding of why you would choose one or the other.
So a tray system, let's go with the one I had in my video,
which is just a three tote stackable tray system.
So here are my three totes. They're all stacked within each other.
And what's going on here is you have your leachate
collector here. So this is the worm juice. This is the active tote.
So this one has the worms and it has the vermicompost.
So it's got basically the food scraps and it's got all of the worms in them.
And then let's say after time, this is going to start to get eaten up.
The worms are going to eat your food scraps. And this right here,
this is like our little, little soil line.
This is going to become only vermicompost.
It's just going to become worm castings, right? So what do you do?
How do you get the worms out of the vermicompost? Well,
what you do is you add the third one.
And so this is the new tray or the new tote.
Let's call it that. New tote. And the new tote is going to,
you're going to put your bedding and your food scraps in here.
And as worms exhaust the food source here,
there's holes drilled in the bottom and they're going to start to move upwards
into this new tote. At which point you can then swap these totes out.
So you do a little hot swap. This tote comes out.
You empty these worm castings out into the garden, right?
Cause that's why we're doing this in the first place.
Those go out into the garden. Now this tote is empty and it's on the top.
So you can see it's taken the place of this tote right here.
And now this tote becomes the active tote because it's now in the middle.
And so basically you have your collector at the bottom.
You've got your little worm juice right here.
You have little supports to hold this up, right?
You have to hold it up somehow.
And then these totes just swap back and forth as they fill up and empty out.
Now what's the difference between that and a flow through system?
So a flow through system,
like the one you saw in the beginning of the video that we're going to get into
a little later is a single tote. Think of it as a single tote.
Now this particular one sort of has like a bottom drawstring bag right here.
And you're doing all of these processes in here.
And so what you've got here is you've got your,
let's just call this your mixture of bedding, worms and food scraps.
So this is bedding in layers of course,
worms and scraps.
Then what you've got here and you can put a little,
let's say you put a little bowl down here or something like that,
your leachate or your worm juice can fall out. Although, you know,
if you're operating a worm bin correctly,
usually you don't have too much of it coming out, but we can just do that.
And then what you've got here is food scraps come in here. So food scraps,
the input is from the top, food scraps in.
Now food scraps start piling up this way and then over time,
let's fast forward a few months, you've got layers.
So you've got kind of like castings here and also right here.
And then you've got your bedding, your scraps and your worms.
So the separation has happened.
It's just happened in the same tote.
And then what you do to get these out instead of having to overturn this whole
tote is you open the drawstring or the opening down here and you let the
castings fall out and then these castings make their way into the garden.
So it basically does the same thing.
It's just that you don't have any stackable totes and you don't have to do any
sort of moving around of pieces because it's all one piece. All right,
so the first thing we're going to do when we're making our bedding is we're
going with not quite a 50 50 mix, but the more diversity,
the better in my bedding.
So coconut coir is going to make up probably about half and then I have some
shredded paper that's going to make up another half.
But if you've seen my video on coconut coir and if you haven't,
you can check out the description or the top right corner.
You need to rehydrate it. It's always a bit compressed,
which makes it really nice to ship,
but it does mean that you actually have to get it up to size before you can
actually use it. So we're going to go through that process.
And then after that,
what we need to do is combine this with the shredded paper and then make that
sort of mix, let it sit for a little bit, make sure it's not too soggy.
Put that in our continuous flow through system and then we can think about
adding worms and adding some food scraps and really getting that bin started.
So first step is to rehydrate this. Now when you're rehydrating coconut coir,
because it's such a compressed brick, you can see right here,
it takes some time for the inner layers,
especially right in that core to get rehydrated because it's the furthest away
from the water. So it takes some time.
So what I like to do is I put it in a huge tote and then I just let time do the
magic. I'm going to fill this up with water and we're just going to let it go
and we'll snap our fingers and we'll be ready to go. So here we go. One, two,
three. Well, there we go. I've got most of it rehydrated.
I'm not going to need to use all of the coconut coir that was in that dehydrated
brick. So I'm going to save the rest for later.
And what we're doing here is in my continuous flow system, the Urban Worm Bag,
I want about eight inches of mixed bedding. And generally speaking,
as long as it's not something that you shouldn't be using for bedding in the
first place, more diversified sources of bedding, the better. So coconut coir,
again, I would highly recommend checking out the video I made,
but it's very water retentive and it is very homogenous. So,
you know, if I,
a lot of people in hydroponics they'll mix like perlite into this or something
to kind of break it up. And that's what I'm going to do,
except for what I'm going to use is paper, shredded paper.
There's no plastics or sort of chemical inks in any of this.
So it's going to be just fine. And I'm going to try to go 50 50.
And it's just going to go into here and then I'm going to stir it up,
make sure it's nice and moist. I'm going to squeeze all that water out.
We'll let it sit for a day or two in the worm bag and then we can move on to
putting our worms in there and actually getting that bag in production.
So all I'm doing here is I'm just taking handful of this and a handful of this
and then I hit it with a little water because the shredded paper has not yet
been moistened up.
And I'm just going to repeat until I get roughly eight inches or so worth of
height out of this.
And then we're just going to mix it up so that it's nice and incorporated.
Cause you don't want it to just be layer, layer, layer, layer, layer.
You want it to be a nice mix for this initial bedding that we're going to put in
the worm bin.
So really excited to see how the continuous flow system works. Again, like I said,
it's like not one that I've tried before. I've always done the stackables.
So the stackables tried and true for me. This is a new method.
We're going to see how it goes. Feeling optimistic about it for sure.
Do a little bit more, probably one more cycle of each.
And I think we're going to be in a really good spot as far as getting our
initial bedding in there. So what I'm going to do here is now that I've mixed it
up, roll up the sleeves and let's incorporate.
So we can show you kind of what it finally is going to look like.
So I'm looking for something kind of like this. This looks good to me.
Show you. It's a pretty solid little mixture right there.
And the reason why you want to mix up,
especially if you're using shredded paper is shredded paper can mat.
So if I had just a handful of this and I put this in water,
it's just going to mat and become this clumped mess.
So there would have been no point in shredding it because it will have just
became one fat clump. So mixing it up is really nice,
especially when I can break it up with that coconut coir.
And this is going to be a good amount.
So let's go ahead and move it on over to the worm bin.
So let's take a look at how this is constructed. First of all,
you can see it's got these, it's kind of like a grow tent set up,
like the little three pin corners that are reinforced here. Nice metal. I mean,
it snapped together really easily. But what I love the most so far at least,
and this is pre-trial, is just how enclosed it is. First of all,
there's a ton of space. Like, I mean, I'm a pretty tall guy.
My whole arm goes down into here and it's this reinforced sort of canvas that's
going to protect this from smells escaping and from bugs going in,
but also give enough ventilation for the worms. And so this fully zips closed,
which is really nice. I'll show you. Just boom, boom,
boom. And then now let's take a look at what's going on underneath.
So this is what's interesting about the flow through. So as you guys know,
the flow through is obviously a one piece system. So you're going to wonder,
how does that actually happen? Well,
what's nice about this is you've got the zip enclosure right here,
but then you also have the drawstring enclosure here.
So when you eventually collect your worm castings,
you're going to slowly open this up and the area from basically where this
canvas ends right here to here is kind of like where your castings are going to
be. And that's about as much as you're going to want to take.
But then when you're not collecting, boom,
you can zip it up and there's only just a tiny little hole here,
which we're going to protect with some newspaper.
And then what you can do is flip this back over.
So there's double protection in case anything drops out.
So pretty nice little setup.
Now let's go ahead and get into the next section. All right,
we've got our bedding prepared. Let's open up the bag.
Let's make sure our drawstring is closed down here. It is.
One thing I'm going to do just because there's a slight tiny opening at the
bottom of the drawstring,
I want to make sure not a ton of water is leaking out is I'm going to make the
initial lining with just some, some ripped up computer paper.
Just kind of stuff that in there as the base. There we go.
And then I can comfortably dump in all of my bedding.
Boom. Problems solved.
We have our initial mixture of bedding, which again,
is that coconut coir and that shredded paper mixture.
I'll just make sure and mix it around a little bit, evenly distribute it,
pop out the bag.
And then the only other thing I'm going to do is undo the zipper at the bottom.
So any moisture that collects here can start to drip out a little bit.
So we make sure we don't put our worms into something that's exceptionally
moist. Okay. I have a little tote.
Just to collect some water if it does end up spilling out.
But you can see we filled it up and the drawstring is holding most of it,
especially with that paper. And if anything decides to come through,
it's going to fall right in here, which is completely fine.
Now we're just going to leave this for one or two days.
So it's been about a day and you can see that we've definitely had some of the
water drained out, which is fantastic.
So we're going to do a little test here to see if this is at the moisture level
we want. You shouldn't be able to get more than a few drops out.
And as I squeeze this, maybe if I'm lucky, I can get one or two drops out,
which is exactly how I want this mixture before we toss the worms in.
Speaking of the worms, I believe we have two pounds of red wigglers here.
Let's take a look at the quality of these worms and then, Oh, look at that.
We got one friend who's slightly escaped. Let's take a look at the quality.
And then we can go ahead and add them to the bin.
Nice little like breathable mesh bag here,
which is cool because obviously the worms need oxygen,
but they need to not escape at the same time. Tight drawstring.
I've had problems getting worms in the past where you'll get the box and then
maybe you can't take them out immediately and they all start trying to escape.
So let's see if we can get, let's let those guys go in there,
see if they come back. But let's take a look.
Looks like they are already in a mixture of core.
Some good high quality worms here, guys. These are looking good.
Looking good, looking healthy, looking a little thin.
Probably means they need a little bit of moisture,
but we're going to go ahead and dump them in there.
It's a decent amount of worms. I think I probably,
if I had my choice, would use less worms, like maybe a pound or so.
We got a nice worm ball here. Look at that. Pretty gnarly, right?
It's like an alien life form. And then I guess in a sense it is.
So we're going to let these worms be.
I'm going to leave just a little bit more bedding on top.
I'm just trying to spread them out evenly.
So I'm just going to prepare a little bit more bedding and food mixture and put
that on top just to give them a little bit of cover.
But then we are going to zip the bag up. So we're good to go. All right guys,
it's been a week or two since the last time I opened up this bag for you guys.
And as you can see, I've got a bunch of old garden scraps here.
I've got a bunch of, you know, just the standard stuff you'd add in.
Some paper towels for bedding, some shredded paper.
Let's go ahead and see what's going on though.
I want to see if the worms are feeling good, looking healthy,
and they're thriving.
So we're going to dig down just a little bit and I'm just going to take a big
scoop and I can already, I can feel them in my hand actually.
So if you take a look, if you take a look,
you can see these are some good looking worms.
It even looks like there are some younger worms in here.
So these are some smaller guys. So that's a really good sign,
which means that they're reproducing. Uh, so I'm pretty satisfied so far.
And you know, again, it's only been a couple of weeks and so it's far from full
and I have yet to actually empty out the bottom.
So that's an overview of the continuous flow through system. Like I said,
it is an alternative to a stackable tote,
like the one that I've done in prior videos here on the channel.
So if you want to DIY,
I would probably say go more towards that stackable tray style
system that we outlined earlier in the video. If you do want a CFT,
maybe for simplicity, you know,
you want a completely enclosed vermicomposting bin, things like that,
then maybe give this one a try.
It's the Urban Worm Bag or try to design your own.
It can be a little difficult I find to design a CFT versus designing stackable
trays. There's more plans for stackable trays.
I even have one on my channel and CFTs, it's just, you know,
it's a little bit more complex of a design, I guess, uh,
unless you guys have one.
So drop one in the comments if you have your own CFT design that you've done.
But I wanted to give you guys the alternatives because this is almost like
you're not vermicomposting. That's kind of how it feels.
And so maybe you know you're wasting a lot of your food scraps,
but maybe you're just like kind of squeamish and you're not into worms or
something about it puts you off. Well,
this almost is like you're not even doing it.
It almost feels like you're throwing some food scraps and some bedding into the
trash except for it's nature's trash and the worms are doing the work for you.
And maybe you've got someone that's a little less squeamish that can kind of
come down, harvest and throw those castings into the garden.
But stay tuned for future updates on this.
I'm going to be doing some updates on specifically this system and we'll be
doing more plans. But I did want to say, if you've been watching this far,
first of all, thank you.
You're one of the rare ones who actually makes it to the end of a video.
And for that, I've got the early release of my book coming up.
So you can preorder The Field Guide to Urban Gardening right now actually.
The link is in Amazon down below in the description.
And what I'm doing for anyone who's preordering is I'm sending you a pack or two
of my friend Bridgette's heirloom seeds. So she does them right over there,
10 miles this way in San Diego. Heirloom, organic, non-GMO,
amazing high quality seeds that are acclimated to zones eight to 10.
Or if you're growing in a colder climate,
then you just have to shorten that growing season.
So anyone can use these seeds and if you do preorder and forward me the receipt
with your address, I'm going to add you to the free seeds list.
And then that'll get sent out to you pretty much right now.
So if you order it right now,
you will get the seeds in maybe like a week or two and then we're off to the
races.
So it's just my way to thank anyone who made it to the end of the video and
wants to support the book by doing an early release preorder.
So thank you so much. Good luck in the garden,
keep vermicomposting and I'll see you in the next video.
