Tradescantia Nanouk care and propagation

travel, technology and convenience
157 followers
19 Video Views·Mar 10, 2023
Hi guys, my name is Sean. I'm a houseplant enthusiast from Jakarta, Indonesia.
I'd like to share with you some of my secrets on plant care and propagation,
and I go species by species in great detail. This is so that you can gain some confidence
and hopefully discover some cool species, because not only are plants beautiful,
but the process of caring for them is quite interesting as well.
So in my hand here, we have the Tradescantia nanook, and it's a Tradescantia family obviously,
but it's considered a very slow growing one for a Tradescantia, and it's got this beautiful
light green and pink variegations on the leaf and on the stems. And I actually got this plant
from one single cutting, and I kept cutting and propagating it and sticking it back into soil,
and expanding the pot size until I got this specimen here, which I'm quite happy with the
size. But as you can see, if I kept growing it in this pot, it's going to get unruly,
it's going to get crazy, and actually the dust trails down after it gets to a certain
height. And actually they do lean towards the light quite a bit, so if you have it on like a
shelf, it's going to trail down and towards the light. However, I have this sort of outdoors
getting dappled direct sunlight where it's right above it, so it continues to grow upwards that
way. This plant actually likes bright indirect light, all the way up to partial sunlight,
direct sunlight that is. Because if you give it a medium light, it will revert to green,
and I have some examples to show you later. And if you give it more light, it's going to
encourage that beautiful pink that we want with this plant. And you have to be very careful with
watering this plant, because it's actually very, very prone to overwatering, to rotting out,
so the stems will just turn to mush, and you will lose the whole stem if you overwater it.
So you have to be very, very careful about this plant. If I were you, I would err a little bit
on the underwatering side. And you can also, again, with most plants, you can squeeze one
of the leaves and you can feel it. If it feels nice and firm, then don't water it just yet.
Also, you can measure the... For me, this is a plastic pot, I measure the weight of the pot.
This is actually sopping wet right now, because it just rained really hard. And do let them dry
out completely. They can withstand a little bit of drought period, no problem. However, if you
leave them to dry out for too long, they're going to start having... I don't have any on this plant
right now. They're going to start having these crisping edges. This plant actually does well
both indoors and outdoors. I can't say which one it does better in, because yeah, they just do well
in both light. And I'm actually looking at this plant in my hand right now, and I see that it's
actually put out aerial roots right here, which means that it's... This is, I guess, for you to
see where the plants will root. They actually root right around... This is the area where this leaf
come out from. That's a node. And as you can see, just from this stem, there's already a lot of
nodes. One, two, three, four, five nodes. This has the potential to become five plants. And in some
of the nodes here, what I wanted to point out was that it's putting out aerial roots already. I
actually haven't noticed that from this plant until now. But yeah, it's ready for me to cut up
and put into soil. It's asking me to do it, in fact. And from the place that you make the cut,
actually, it will branch out from below. So don't worry about making a cutting from this plant. And
I would fertilize this plant a little bit, not too much. Pretty much standard with any of your
house plants. And I've actually never had any pest issues with this one. Knock on wood, of course,
as I said, I might find something. No, I don't. Yeah, this is a pretty easy grower for me. Again,
it does quite like a bit of light. So that's my advice for you. Bright light and do not overwater.
Other than that, this is a good plant that everybody would stop and look at it and stare
at it because it's so beautiful. And it's a good one to share with your friends and family. I'm
going to bring you to the propagation table to show you how this plant is propagated. And I'm
going to give you a few months update on how the cuttings are doing. So as I promised you,
to green. Actually, I quite like the combination of the pink and the green in the leaf. So this
one, as you can see, I made the cut over here and it branched out over the side. This is actually
quite a few cuttings in one and it should grow pretty big. I think this is about two to three
months old. I can't remember. So before anything happens, I'm actually going to try to see the
roots. This one is mush. I think this one's broad as you can see here. I think this is a young plant
and it was overwatered. So it's mush. And I don't know if I can salvage this because I don't see a
node, but maybe I'll try to stick this in soil to see if it will root. But it happens from time to
time. Again, they really don't like to be watered much at all. So let me, I noticed the pot is
stopping wet. So let me try to do it carefully. Tritis contis, they have really fine hair-like
roots. They can be, as you can see here, there's still a lot of room in this pot. And here maybe
you can see the roots are actually very tiny amounts, very hair-like and fine. So let me put
this back in here. What it's telling me, since it's got area in there for more roots, I'm going to
get a trusted pencil and my pruning shears. I'm going to start cutting this up. So this is where
the one with the aerial root. I'm just going to snip it right here. And from here, I'm going to
turn this into, this is too, this is too big of a cutting actually. So what I can do is I can
turn this into two different plants. Snip. So this one can go straight into the soil. Let me do that.
And I'm actually going to move this into my bedroom. This was living outside, but I have to
move it to my bedroom because I can control the moisture better when I have it in my
care, when it's indoors. Because when it's out here, it's raining mercilessly every day. So
yeah, I can't really control how much water it gets. And again, it's been raining a lot
which is why this pot is actually stopping wet. But the more plants that you have in here,
the better it is at absorbing that water. Just stick that right into there and just wait and
it will take root. And for the other cutting that I got over here, this is actually too many leaves.
If you take a cutting of a plant, first of all, this section here is going to be submerged into,
because the root is going to come off on this node, this leaf is going to rot. And secondly,
if you have too many leaves, the plant cannot decide what to do as the leaves do need nutrients
and water to survive. So it's going to extract it from the node and from where we cut it below.
However, if there's not enough nutrient and water, the leaf is going to die out anyways. Instead,
the plant should focus all its energy into building roots around the node. So yeah,
I'm going to take that leaf off. So when you do this, the plant is actually, this is a healthier
cutting. I may actually even take off one more leaf over here because this is too much energy
being drained by the leaf. We want the energy to be focused on the roots. Perfect. Now we actually
have two nodes here and we can actually plant this deep into the soil. So there's two nodes
that's going to be rooted. I'm going to poke a hole and just stick this inside. So I've been
doing this for the last few months. I mean, I would say that this project took about nine months
to 10 months to get to this size from one cutting. And one cutting is actually expensive. I got it
for about 150,000 Indonesian rupiah and this was before the pandemic. So I cannot imagine the
prices now. And let me see, I can take off some more actually. I will take some of the
ones with taller leaves. Actually, this one already got area roots. Perfect.
So again, I'm going to take this off. And if you see that roots, it's ready to go.
And for this, I would, this cutting, I would actually only take, I'll take this much. So
there's going to be two leaves and yeah, I'm going to stick this straight into. You know what? I'm
going to, for this, I'm going to stick in the soil. I'm going to do one in water in a bit.
So let me, let me do this one first. Let's stick it right in. Beautiful. Okay. I'm going to move
on to another part. Actually, this one is one single, it was actually a tiny cutting before.
And as you can see, it kept growing and there's something ate it. I'm not sure, but I'm not worried
because what I can do is I can just, let me see, where do I want to cut it? I'll cut it off right
here, actually. Take off one here and I'll take off one of the leaves and just go ahead and stick
it right back next to it, to the soil. It's very, very simple. Sorry, you're not seeing this. I'm
back up a bit. You can see it and you're all set. Now we have two cuttings in one plant.
We do have one extra cutting here that I've prepared a propagating vessel. So I'm going to
take off one more leaf again and I'm going to just do this one in water. I want to see the roots
emerge. In fact, I can do two in water. Hang on one second. I'm going to do one more
right here. And I've got another cutting here actually. So this one, I'm actually going to put
so messy here. There's too many things going on. I'm not going to remember which ones are the
propagates, but I assume like with any of these, I think about maybe a quarter of it may die off.
The propagation rate for Tradescantia are actually lower than a lot of the other plants. They
actually tend to rot off quite often. I would say maybe about 25% failure rate. So yeah, this is a
excuse for you to propagate more because the failure rate is quite high. With this one, I am
actually quite okay with the way it is. So I'm just going to plop this into my propagation
bottle. Yeah. And I'll see you in a few weeks. Bye. So we are at exactly two weeks from the
propagation time and this plant has rooted. Tradescantia are one of the fastest rooting
plants that I know. And yeah, I think this is pretty much ready. And I'm going actually with
Leca for this one actually, because I have so many plants already in pots and I'm beginning to like
that feeling of Leca in a glass jar. I'm beginning to like that root porn action going on. So I'm
going to show you how I set it up. So what I'm first thing that I want to do is I want to take
a cotton twine or any kind of yarn will do with any kinds of absorbency. And I just want to tie
a little loop here, maybe a little loop. And I don't know why I do it. Maybe I've seen someone
do it subconsciously. I'm not sure. So I tied both ends. I'm just going to leave this in the
underneath the pot and I'm going to put in my Leca. So the idea is that I want to have this,
the bottom of the twine underneath here, and then the top will be almost at the top of the soil
of the Leca I mean. And this means that the water would be wicked up more evenly to the top by this
string here. Without this string, I found that the Leca would be a lot more wet
below than it is on the top. So this ensures more even distribution of water. And I love this.
I got this from a wine shop that I got last week and I thought that it would be very befitting for
this Tradescantia. Look, this is not sponsored by any means. Not sponsored to disclaimer. So I'm
going to start putting my cutting in. I'm going to hold it up here. And I've been enjoying this
with one of my jungle cacti. Love how it's looking. So I figured I want one of each plant species in
Leca and kind of have that kind of setup. I'm sure I still have that string. Okay.
Okay, so now that I'm almost to the top, I'm just going to find a place to just let the string hang
out. And you want to adjust your plant until it's standing beautifully. The thing with Leca is that
it does move around quite a bit. So your plants are a little bit on the wobbly side. And I am all set.
Perfect. So I'm going to fill this up like this high with water. And once in a while, I'll add a
little bit of that Grow More Fertilizer into the water. Very, very tiny amounts. Only because
unlike pots with holes in the bottom that will flush away excess salt in the fertilizer,
this obviously doesn't have it. So that fertilizer is going to sit in there for a long time. So I'm
going to just use very, very, very minute amounts. Yeah. So I'll see you in a few months. I'll give
you some more updates on all the cuttings. Welcome to a eight weeks update of the plant. Let me
quickly show you the one that we propagated. I'm going to put on the screen what the old cutting,
I mean the old plant, looked like right after I propagated it. It's grown a lot. And it's actually
living right now, by the way. It lives up here on the shelf. So it gets a little bit of direct
sunlight. It gets watered very frequently. It gets rained on. And I do hose it down every day.
So it's doing really, really well. Oh my god. I'm very, very happy with this. Because this one,
the main plant, did not do so well. And this is because I actually put it in my balcony.
I don't know why I did that. And I put it on a shelf that's like that high. This is the height
of the shelf on my balcony. So I thought it would get rained on every day, which it did,
until it didn't rain for a few days. And I underwatered it. I forgot completely about it.
So I had some leaves that were lost. They were crisping off. Anyways, Tradescantias,
their old leaves, they don't last very long. Their leaves do expire. And they become
scraggly with new leaf coming up on top with just a bare stem. So that's a growth pattern
of Tradescantias. That's why you always have to keep propagating them, cutting them back.
And when you do that, you can see that new branches are up. This is so cute. Look at
this particular one. It's trying to grow out of this little stump. Yeah, all of these are
basically branching out. And I know that you guys are looking at this and thinking, oh my god,
it looks so much better before I cut it. But it's only been two months and look at all these
new growths. So these are all like going to take over the pot. They're going to get very,
very bushy. So give it time. The plant will get really bushy and really healthy. And this one's
even trying to push each other out of the way. Very cute. Yeah. And then this one that I did
in LECA, it's actually doing quite okay. I'm not sure how I feel about LECA. I'm confused
about it. But I like watching the roots form on these plants. But this is not doing that well,
in my opinion, because a lot of the leaves are prematurely crisping up. So I don't know. But
the new leaves are beautiful. They are healthy. And this looks ******* unlike. It doesn't feel
like it's in stress. So I'm going to just say that I guess this plant is doing all right. I'm not
going to vouch for LECA. I definitely think it's an interesting experience and I'll keep it in
LECA and I will update you guys maybe on my Instagram. And this is the other one that we did
with that reverted one and keeps putting out reverted Tradescantia. It's raining really hard
now. But yeah, it's growing. This is growing. They're actually very prolific growers. They're
not as fast as the Zebrinas, but they're fast to root. And before I go, I got a plant and this came
in the mail too, but I have a feeling this is a Tradescantia as well, just judging from the
growth pattern. And Planet Daily Podcast has a really beautiful episode on Tradescantia. And
I recommend for you guys to watch it because there's so many species of them. And yeah,
we've only covered like some of the more mainstream ones. And this is one that is fuzzy. I'm going to
leave the name of the species on the screen because I don't remember it. I killed this plant
and I had only, look at the baby leaf, how cute. I only had one stump left and this is what grew
from that one stump. So I'm amazed. I kept cutting it and sticking it back into the potting mix. So
this one is particularly susceptible to root rot because it's also fuzzy. The leaves are very,
very fuzzy. So in the stem, so I forgot to mention the stem is also very fuzzy. So they rot really
easily because it's a lot of surface area for them to rot. I still haven't figured out the conditions
that they like, but I will. And maybe in a year's time, I'll do a video about it. But these are very
beautiful. It's raining right now, so you can't really see the white fuzz because these leaves are
wet. But maybe you can see from the baby leaves just how fuzzy they can be. Very, very cute plant.
This is like very similar to the Peperomia incana. And yeah, the lower leaves again here are falling
off just like a lot of the Tradescantia. They will only have a bare stem with healthy leaves
in the end. This is just how they grow. There's nothing you can do about it. So you can cut it,
stick it back, and something will grow out of the nose before that. So this is how you
grow Tradescantia actually. I'm pretty sure all of them have a similar type of growth pattern. So
just keep cutting them back, keep propagating them, and share it with people that you like,
people that you love, people that you care about. Anyways, it's starting to rain really bad. I'm
gonna leave. Thank you so much for watching this video. I'm at Botanist on Instagram. Do DM me if
any questions regarding plant care and propagation. I will try my best to get back to you.
Meanwhile, do take care and stay safe. I will see you in the next episode. Bye!
