Nitro Cold Brew: It's coffee, but not as you know it

Seven Miles Coffee Roasters
12 followers
11 Video Views·Mar 2, 2023
Today I'm going to show you how to make super smooth nitro cold brew coffee. We'll take a look
at the equipment you need, the best type of coffee to use and I'll even throw in a bonus
recipe at the end. Let's make some pretend beer. Nitro cold brew sounds complicated but in reality
it's pretty simple. We start by brewing coffee in cold water and then we charge it up with nitrogen
gas. Really simple. The end result is a super smooth iced coffee with the cascading texture
of a stout beer. The fine bubbles of nitrogen gas give the cold brew coffee a creamy taste
and texture without adding milk and I guess it looks pretty cool too. To make it we'll first
need to make some cold brew coffee and then we'll need some equipment to charge the cold brew
with nitrogen. I'll show you two different devices that are very quick and easy to set up.
One suited for home and the other suited for serving on tap like in a cafe. Before we get to
those let's quickly talk about the best way to cold brew the coffee for nitro. Normally when we make
cold brew coffee we brew it as a concentrate. Brewing a concentrate is great when you want to
mix it with milk or use the cold brew as the base ingredient for another drink. However in this case
we're going to be drinking it straight. So for this purpose I find you get better results using
a cold brew ratio of one part coffee to 12 parts water but feel free to experiment. This ready to
drink style cold brew is lighter in body than a cold brew concentrate but the extra water does
help to extract more from the coffee grounds giving a different balance of flavors than the
typical cold brew concentrate. Either way the brewing process is exactly the same. If you have
some cold brew equipment like the toddy brewer then you can simply follow the brewing process
that we have covered earlier in another video. I'll link to that one just down below in the
description. If you don't have a brewer then you can still make cold brew using a saucepan, a sieve
and a paper filter. Start by adding coarse ground coffee and cold water to the saucepan using that
1 to 12 ratio I just mentioned. Stir them together, cover the pan and leave it to brew for up to 24
hours. When the time is up pour it first through a fine sieve to remove most of those coarse coffee
grounds and then through a paper filter to remove the finer particles and pop that brew into the
fridge to chill. Now it's time to charge the cold brew with nitrogen. The first device is a modified
cream whipper. This will make up to about 500 ml of nitro cold brew. You can buy these nitro press
online along with the nitrogen cartridges and it is a great way to make small amounts and store it
in the fridge at home. To use it I find the brew best if chilled in the fridge first then add the
cold brew to the marked line, insert the nitro capsule into the handle, screw it down and let it
charge. Depending on the desired thickness of foam, multiple shakes for a few seconds with the
mixture before dispensing the nitro cold brew I find is great for the finished product. The
second device I'll show you is more expensive, like a lot more expensive, but it does allow you to
serve large quantities of nitro cold brew on tap which is great for the cafe, a mobile coffee setup
or on the bar of your private yacht. Yo where's my invite? What's more it chills the coffee and
draws the nitrogen from the air so you don't even need to worry about rigging up gas cylinders.
Really simple. You basically just plug it in, throw the hose into a container of cold brew and there
you go. Now if you're going through a lot of nitro then you could just keep the cold brew at room
temperature, however I would definitely recommend keeping the cold brew in a bar fridge or a cooler
box for the best results. The alternative to this device if you want to serve nitro on tap is to use
a keg system. It'll be cheaper to set up and some home brew shops already have special kits designed
for nitro cold brew. It will still take a little bit more DIY plumbing skills to use these setups
Now if all of that does sound like too much work then there is one final option I haven't yet
mentioned. You could just buy a nitro cold brew in a can. But finally we're at my favorite part
the bonus recipe. Nitro cold brew has always looked alcoholic to me so now let's look at
a recipe that does make it alcoholic. Nitro Irish coffee. We'll start with 180 ml glass,
add 20 ml of whiskey, 20 ml of simple syrup. I'm gonna go with vanilla because I like that
sweeter touch. Next we'll pour in our nitro cold brew leaving a gap at the rim of the glass
and finally add some lightly whipped cream. Oh yeah that does taste good. And if you're interested
in more iced coffee recipes then you should definitely check out the video just up here
and I'll see you guys next time. Enjoy your nitro cold brew.
