☾ Sailor Moon Bow Necklace ☽ with Polymer Clay

Cute Clay DIY
9 followers
10 Video Views·Feb 28, 2023
Inspired by the clothes and jewelry of the Saiyansenshi, I create a Sailor Moon Bow Necklace
that I wanted to share with you guys.
It is really easy to make and with the template that I have made for you, it is even more
easier.
Let's begin.
First, print out the template and cut it out.
You will need the two separate parts of the bow.
The first template is just for comparing the result at the end.
Then take some red clay and roll it into a ball and put it on a small sheet of baking
paper.
Put two popsicle sticks with the exact same thickness to the sides of your clay.
Then put another sheet of baking paper onto everything and roll the clay to flatten it.
Peel off the upper baking paper but don't remove the bottom sheet.
Now take one part of the bow's template and put it on the clay.
With a cutter, cut out the shape of this bow along the template.
It's totally okay if it's not 100% perfect.
You still can adjust everything before baking it.
Now you can remove the cut out clay.
Here I already remove excess clay and adjust the bow to make it more even.
Repeat everything with the second part of the bow.
For the brooch, cut off a little bit of goldish yellow clay and put it on the circle of the
template.
By pressing the clay to the black frame and then from the edges, tending upwards, you
will get a nice round shape.
Before baking everything, we need to add eye pins so we can add the chain later.
You can put the eye pin into the middle or put two eye pins to each corner of the upper
bow.
Make sure everything is okay and then it's time for baking.
Now glue each part with some super glue together.
After everything is dry, let's paint on the brooch.
First we need red to paint on a small dot on the upper part of the brooch.
Then yellow to the right, green to the lower part and then a blue dot to the left side.
Now paint a yellow half moon between the three upper dots.
In the left space we can add a pink dot that is slightly bigger than the other dots.
With a super thin pigment liner, connect each dot with a thin line.
First the other side, then the inner part.
You basically want the two lines to frame the four dots.
You're almost done!
Before adding the chain, don't forget to glue on the eye pins into the clay.
Let the glue dry and then let's add the chain.
To measure out the length of the chain, put the chain around your neck like this and bring
each side together.
Decide where you want your charm to be and mark the end of the chain a little bit above
your actual mark.
Now fold the chain in half and cut it in the middle to get two equal chains.
Afterwards add small jump rings to every end of the chain and connect two jump rings with
the eye pins of the bow.
To the third end we have to add the small jump ring in a lobster clasp.
To the other end we add a small jump ring and a bigger one.
Now the necklace is finished and ready to be worn.
This necklace is simple but it will let you feel like a Sailor Senshi.
And with templates you can create your own bow inspired by your favorite Sailor Senshi.
I hope you enjoyed this tutorial and if you want me to make more of such tutorials for
you guys, feel free to comment below.
Thanks for watching everyone and have fun!
