Woodturning - Batch Out Bottle Stoppers FAST!!!

Motivation Monday
96 followers
4 Video Views·Feb 24, 2023
Alright you bunch of heathens, I'm going to show you my second project that is a pretty
good seller.
Now I didn't sell this one at Christmas last year, but I've been selling them locally at
a little shop and they've been doing pretty well, especially because I've got the price
on them pretty high, because I use nothing but the highest quality hardware and the highest
quality finish.
The biggest takeaway I want you to have from this video is how I'm putting the finish on
my bottle stoppers, because I'm coating these with a resin finish off of my lathe.
I set up a different little contraption that way I can do three of them at once.
But of course, first I need a bottle stopper, so let's turn one real quick.
I'm going to turn this resin one, I'll turn some of these other ones, but I'm not going
to make you sit around for all of them.
I really want to show you how to do it quickly, that way you can sell these and make a pretty
good profit.
So I've already drilled my holes, again if you're doing stuff like this, a way to save
time is to drill them all in batches, I'm going to get some of these others out of the
way.
The cup I actually keep to the side and fill any time I'm pouring resin in anything else.
I pour my leftovers in here, so the colors are probably going to be pretty crazy.
It is actually taking the threads, once you get the first couple it's pretty easy.
And if you feel it getting too tight, just like when you're threading metal, back it
off a half turn and then keep on going.
Don't actually thread them with an actual tap, you get them little pieces, and you don't
want those to seat against here, because this is going to be your reference to keep everything
nice and true and flat I guess you could say.
So take a peek, make sure you clear that out before you actually seat the base against
the bottle stopper mandrel.
As you can see I leave the cup and everything on, I'll turn it off.
All about speed here baby, speed.
Alright you're going to see most of this turning done with a negative rig round, which is what
I find works best.
But I do have to highly, highly recommend this TotalBoat with the medium hardener, this
seems to be perfect for this.
I didn't put this in a pressure pot either, because the way I finish it, any kind of air
bubbles or stuff like that, imperfection on the surface, don't really matter.
This medium set really gets rid of bubbles very, very easily.
Alright that's it, I'm going to stop messing with it.
Number one problem I think I had when I first started playing with these, and I see a lot
of people have is they mess with it too much.
It doesn't need to be super fancy, it's pretty simple.
I'm going to hit this with 80, just to kind of smooth out a few areas, and then we're
going to finish it.
And that's the cool part.
That's it, that's as much sanding as I'm going to do on it.
You're going to say, what the hell Brad, you're going to get a terrible finish.
Just wait, just wait.
I'm going to turn a few more of these, bring you back when it's time to finish.
Alright you bunch of soggy McMuffins, we're back, I'm ready to go inside.
So before I do, I'm going to put the resin finish on a couple of these bottle stoppers.
All I have here are modified cup turners, as you can see I modified them.
I just cut that, shoved in a Jacobs chuck, this is your standard MT2 taper.
And put a 3-8-16 bolt.
Now this one's a little bit different, but that's just because I had other plans for
it.
But it's a 1-inch, 8-threaded rod here, and I just thread on my mandrel.
Very very important you put the Teflon tape on, so I'm going to do that now on the ones
that need it, and then I'm going to show you how to get a perfect resin finish on a bottle
stopper.
Shit, I ain't got a stick to mix with, where's my mix stick, I have to get a mix to eat.
God, I'm tired of this tiny shop.
Alright, so we're ready to mix up our resin, and we're going to be using the TotalBoat
tabletop.
I know I said in there earlier that I love the medium, but uh, for this, I like the tabletop
honestly because it's easier to mix small quantities 1-to-1, and I found that these
little children's medicine cups, you can buy them in like 500 packs on Amazon, are just
absolutely perfect for measuring small quantities, because even though I'm doing 3 here, it's
still going to be more than enough, and I have an extra cup that's going to uh, be where
I pour my excess, which is how this one was made.
Don't worry, at the end of the video, I'll show you some resin bottle stoppers that were
intentional that actually look a lot better, like the colors look a lot better, but anyways,
2.5 mils of A, 2.5 of B, mix it up, and see what happens.
And by the way, TotalBoat was cool enough that they sent me over their tabletop, their
fast, medium, slow, and their thick set, so I've tried almost everything except for their
super thick set, and I do plan on doing a resin video because there's a couple other
brands I've worked with as well.
I want to give y'all my experience of what resins work well with what projects, because
that's really what it all comes down to.
Alright, let me mix this up, I'll bring you back when it's time to start applying the
resin!
Why am I like this?
I'm tired, that's why.
We've got our cup turners on, they're just going, I think it's around 5 or so, 5 RPMs.
Harbor Freight Acid Brush, make sure you pull any loose fibers out and keep an eye out because
they will come out, and we're just going to start applying, we'll go with this one first.
Now the wood ones, honestly, will usually take two coats, er, sorry, the Spectraply
ones will typically take two coats, uh, if I would have thought about it ahead of time,
could have hit it with a coat of lacquer to try to seal it a little better, but I didn't
think about that, so it's going to suck up this first coat pretty well.
For the second coat, you just, uh, hand sand it, scratch it up a little bit, and, uh, apply
a second coat the same exact way, so there's nothing really that I need to show you.
But I will show you the final product, don't worry, because these are going to look awesome!
I do just a light coat on the base, just to seal it, really don't care what that looks
like down there, though.
Now, of course, you gotta, you gotta pop the bubbles like any other type, keep it moving,
easy to burn these little thin layers.
You can see how all them scratches disappear because that resin just fills them in.
Beautiful, beautiful finish, now this blank isn't the prettiest, uh, because, like I said,
it was just my scraps, but somebody out there will like it, and it's got Texas ebony in
it, if you can see the wood, and then you can see just how much those are soaking it
in, soaking it in.
You could sit there and try to pop that stuff, but there's really no point, because you're
going to have to sand it anyway, so, just kind of a waste of energy.
But sand those back by hand, just a hair, you know, 120 grit pad, hit them with another
second coat, and they will look great.
In fact, let me show you some that are already done!
Since I accidentally deleted my ending to this video, I'm just going to make another
one, and I'll show you a different set of bottle stoppers.
Ordered from Stainless Steel Bottle Stoppers, you can get a variety of kits, and it's really
just as simple as picking your favorite style, and screwing it right into the same thread
pattern that you screw, that your mandrel is.
I really tend to like the classic at this point, I think it leaves a good shape, and
I really, really love this bottle stopper.
It's just scrap wood.
So while I'm screwing these in, I'll show you some other bottle stoppers I've done,
just, I think it was a TikTok video, so excuse the smaller video, and then also how I package
them to put them in stores.
So I hope you enjoyed it, the biggest thing I think to take away from this video was the
resin spinner, and that's a pretty easy thing to put together.
If you really need a detailed video of how that was done, leave me a comment, I can consider
doing that, that would be a pretty easy video to make for you guys.
And please subscribe if you learned anything during this video.
Trying to grow this channel, trying to get the watch time up, so I can monetize this
channel along with Brad's Workbench, and then maybe be a full-time content creator one day,
you know?
We can all dream, right?
Alright, appreciate you guys sticking along to the end, and I'll holler at you next time.
Peace!
