Este vídeo demuestra como aplicar el método de Andrew Loomis en un restrato realista (frontal) con lápices de grafito. El método Loomis nos sirve para proporcionar o estructurar el rostro o cara de la persona que queremos dibujar, Andrew Loomis fue un gran ilustrador estadounidense que nos otorgó el método loomis para poder dibujar rostros en todos los ángulos.
En este caso podremos aplicar el método Loomis en un rostro realista, concretamente con Will Smith. La gran ventaja de aplicar el método Loomis es que partimos del dibujo con una serie de guías que hacen que sea muy fácil dibujar rostros.
📖✏️ VIDEOCURSO DE DIBUJO REALISTA | Disponible en IOS y Android ⬇️ https://bit.ly/33QuUzK
artemaster, dibujos artemaster, como dibujar, arte master, dibujos, dibujos faciles, dibujos realistas, dibujos, como dibujar con método loomis, como dibujar una cara, como dibujar un rostro facil, como dibujar una persona
Welcome to the canal of Artemaster.
In today's paper we'll see how to apply the Loomis method to a frontal portrait for
Do it realist.
This method of illustrator Andrew Loomis is very extensive, so today we're going to concentrate
All the information to make a realistic portrait, with a series of guides which
They're very easy to understand, so without further ado, let's go with the video!
Okay, well before I go do the Loomis method with Will Smith's portrait, I'm going to
I'll show you how this method would be applied in standard form, in this
If it's frontal, the first thing we have to do, as you can see, is make a circle.
Inside this circle we have a cross, now we have these vertical lines in
both sides of the circle, and now since the cross we made in this circle we have
that divide into three sections the middle middle upper half of the circle y in three sections
the middle of the circle.
The distances should be approximately the same.
I'm noting it with blue lines so you can better notice the difference.
These are, let's say, the standard measurements for a face, but they can always be
I'm going to be different.
And now finally with the pencil we would measure two of these sections, and with that measure we mark
From the last section from inside the circle, and at that point is where I would go
I'm not going to tell you.
At this point we can make the sections a little more specific, for example in this section
I'm gonna draw this horizontal line that's where the lower eyelids go,
And then right up we're gonna have these re-squares that are going to be divided into five parts and basically
It will help us to divide the sections between the eyes, the nose and the spaces of the extremities.
The eyes.
Also, as a general rule, where the eye starts, the nose starts, I mean.
in the same axis, so this way we would have the separations of the eyes and also the
The position of the nose.
But I know this is all extremely ridiculous so I'm going to point out what
I'll be in each of these sections.
In the first line blue goes the hair birth, in the cross that we made at the beginning,
The horizontal line, that's where the cejas go.
The eyes are just in the section below, which we note has that subsection for
The lower eyelids, in the next section, will be the nose, which we see there.
that we have the orange marks to indicate the anchor of this, in the lower part
The circle is where the mouth would be positioned.
Son estimativas, no siempre van a encajar perfectamente en cualquier rostro, y la línea (no always they are perfectly in any way, shape or form)
What we did down there in the middle of the afternoon is actually for the barbilla.
All these measures, as you see, are facilitating us to make a face well proportioned, without
Headaches and no wiping 50 times since we have the measures and the spaces well
I'm going to put a standard face on it.
Everything would be explained in a very simple way, the method at the end.
You can find it on the Internet very easily, but well so we can appreciate that applying
All this method because we can have some pretty aesthetic features.
And now that we have all this clear and we know how these methods work
Loomis at least for the front method, let's try to make a drawing of Will
Smith, I have a printed photograph here, and the first thing I do is take the measurement of
the mouth, the head and also the separations of the ears, and thus
I can see where the boundaries of the initial circle are going.
In fact, in this case I'm doing it with two sheets of A4, because I'm doing it like this.
It will make the task of transplanting the photograph into the drawing much easier.
And it's that although the Loomis method is very intuitive to make this kind of realistic portraits,
It's not just that we have to look very closely at the person's features.
What we're drawing, for example, if Will in this photo was intercerrando
The eyes could not be exactly the same standard measurements, or as in this case we will see
Will's chin is a little bit more than the standard size.
Well at this point we can make the cross inside the circle, in this case the portrait
It's totally symmetrical, if it had any tiny inclination we'd have to have it.
Count on it to make this cross.
Make sure that the horizontal line of this cross is already coinciding with the
So that's a good sign, and now we're gonna start dividing you into these three sections
in the upper part of the circle, more or less notice that they are of the same size
I'm just leaving the top one with a little less space than I've fixed.
Will's hair growth is a little higher than normal.
Then now I'm going to divide into 3 sections the circle of the bottom part, y first
I realize appreciating well is that the section between Will's eyebrows and eyes
It's quite extensive, so in this case I'm not going to do the line of the párpados
I'm going to add outside of what would be the eye section.
The eye section would be an extra line to put the eyelid line,
I repeat, in this case Will's eyes, the eye section would come out
It's normal, that's why you shouldn't take the Loomis method as something scientific but
More like a little orientation, but obviously it helps us a lot.
Now as he explained at the beginning, taking measures with the pencil, we will look at the
Two first sections, the one that goes from the eyes to the nose, and in this case I fixed
I had to add extra chin so I took it from the end of the circle
Adding an extra what would be more or less a centimeter and a half to make it
adapt better to Will's real proportions.
Now we're going to go to the section where the eyebrows and eyes come in, and we're going to do these
5 separations to fit the eyes, which in this case the side spaces
They're gonna be a little smaller than that. I'm gonna point with my finger, so let's go.
We'll keep that in mind and we can help ourselves by eating with a pencil.
We can also see here that Will's nasal fins don't match.
With the standard nose, but we have to widen it a little, so we do it
It's not a problem.
At this point we have the measures taken, everything should fit quite well, and in
This is where you finally get your hand up and start bouncing, from here.
Yeah, you're gonna have to work a lot harder to get all the proportions right.
etc., but as you will see it is much simpler if we have these guides for
to fit the sections of the faces, but as you will realize it is much simpler
I can fit the faces of the face in this way if we already have all the indicated sections,
And yet of course when you're already doing the sketch you can continue taking measures
With the pencil so everything will be much easier for you.
As you can see the first thing we're doing is the eyebrows, which we're positioning
There, inside the line of the middle of the circle, and as I mention you at the same time I'm taking
I'll take measurements with my pencil and my fingers to make sure the measurements are right.
Then in the bottom of this section I'm enclosing the eyes, which we remember that
We have extended outside this section a line to put the lower parts,
And now that I've got marked eyes, eyebrows, etc., I'm going to mark too.
A little here the pómulos, y directamente we also begin to fit the shape of the
NARIZ, we have to remember that we had to widen it a little bit since it was not the standard form.
Of course at this point you can also be pointing a little the marks of the shadows,
We will also position the ears, which usually start from the height of the eyes
The upper part and the lower part of the ear usually start to draw from a little
All that, I repeat, is variable in each face, but more or less the same.
If not, you know that to be sure you can measure with a pencil.
I'm going to keep my mouth shut, so I'll measure a little to make sure I'm keeping the distance, and I'll actually...
The line that separates the lips is where it goes right there in the line of the circle.
Always going to be just right there, depending on the face you make, but you know what else
I'm going to start sketching a little bit too.
The danger is to mark some shadows of the face that look quite marked.
If we had made all the facial features and also all the most marked shadows, we would have been able to see the whole picture.
The Lumis method would reach here, and now is when it comes in.
Before I start drawing a Will with pencils of
Graffitos I'm going to erase all the marks from the initial guides, and now yes that yes, we can take
Our graphite pencils and start detailing with great calm all this portrait that we have
At first it may be a little difficult to understand all the
sections, etc., but I recommend you watch the first part of the video,
I'm sure he's very well explained how to do it perfectly.
Some error explaining this method, please leave it in the comments so that everyone can
I'm gonna go through it on camera very quickly so you can see the whole process, which by the way is also
Probably when you're already at this point in the drawing, that you're detailing it, etc.,
I'm not sure if you can see that maybe something doesn't fit very well.
I am sure that the Commission will be able to do so, but I can assure you that these were small changes, almost imperceptible.
Yes, the Lumis method worked pretty well for me and I think it's a good method.
I've drawn it in detail, using pencils from 9B to 2B, and also different ones.
Tools to be able to decipher, etc., but already for this video it makes me a little complicated
I'm not sure how to explain all this, but for those interested in perfecting all this technique to get
Good realism, and also concretely using graphite pencil, which you know I have a course in,
I'm not going to announce it, but I have a course on Udemy.
Description for those interested, and I think it's quite complete to learn how to draw with
It's been a while since I drew a picture with a graphite pencil.
And the truth is, it always brings me very good memories because that's how I started drawing.
It's the technique that I think all artists fall in love with drawing, and sometimes
I'm a little off, but I really love it. It's an exciting technique. Graphite pencil.
A la que es simple dentro de lo que cabe, porque al final siempre trabajamos a escala de
This is the one we would use as a frontal method, but also the one we would use as a frontal method.
So let me explain those methods.
And well, after a few hours with the Will Smith drawing, here we have the
I'm not exactly the same, but the truth is
It's very difficult to achieve perfection when it comes to making a portrait.
Photography, so if you don't sell super accurate, don't get discouraged, it's normal, you just try to go
That's all for today, but I'm going to try to get back to you.
I hope this video has been of some use to you, I'd appreciate it if you left a comment.
And nothing more for today, thanks for watching, keep drawing,
And we'll see you very soon in the next video.