A Day at Petworth Part 4

Magical Mirrors
232 followers
3 Video Views·Jan 31, 2023
Is that capsule running there? I can't open that water up, can I?
Oh man, is that that boiler?
Coming to watch me Sam.
In the first layer of membrane down, that's a 1200 gauge membrane.
They come in 1000 or 1200, that's the thicker stuff.
There's no specks on this, there's no build irregularity like that.
We're just putting it in there because it's a concrete floor to make it nice and warm for them.
So we've got a sheet of membrane going down first,
and then we're going to put our 75mm Sellotex down,
another layer of membrane, and then our concrete floor.
Unbelievable.
It's a bit priddly this membrane.
Maybe we should get the women round to do this actually.
Yeah, the women should do this actually.
Because they're the best at the duvet colours.
Mine's like a little grey in the other ear, it's not quite as nice.
She went and bought two new pillows, duvet cover and actual duvet.
She went and done the old.
It's nice mate, it makes a world of difference.
What a good duvet.
Did you get an actual quilt as well?
Yeah.
New quilt, got the duvet cover?
Yeah, quilt, the whole lot.
I needed it mate.
Was it rotten was it?
Well, we had it four and a half years.
Pillows as well, I go through pillows quick,
because once they've gone flat that's it.
I have to chain them.
Sure.
Sorry Sam?
I've got all the new ones.
I hope so Sam, you've got a new flat mate.
Don't move in the house again.
I ain't moving out again.
Not this year.
August.
I'm not moving to August.
You're not going to move?
I'm not moving this year mate.
Too much money.
If I had that money I'd go and buy a little motor.
Would you?
Yeah.
Too much isn't it, keep moving like that.
It is man, for no reason.
For the amount of times I've moved in the last five years,
I could go and buy myself a brand new mug.
And you've got nothing out of it either have you?
No, that's the thing mate.
We'll use that, we'll use that.
This doesn't need to look pretty.
I'm going to leave that bit out there,
because I'm going to drain some water into there in a minute.
It's starting to spit a little bit,
so we're probably on the home straight on that to be honest.
That's got to come out the wall in a sec.
It's a big tank we're draining down.
We're draining down an old 50 gallon tank in a lot,
plus a big 1600, I think it's about 550 cylinder.
There's a lot of water we're draining down.
That's storage I've got going on the whole crap of the house.
The whole house, yeah.
That's why you lose your tape measures.
There's going to be some rubbish coming out of that one.
What, are they going to the floor with it?
Just leave them.
No, actually I passed you the tape measures,
I said Sam, here you are,
and I passed you all the gear,
and you didn't move it.
See?
So actually, you started to do this.
I'm Samantha.
I'm Mr Criticism.
Right, we're just waiting for that to drain.
As soon as that's finished we can pull these out,
because we've got to mess about with these, haven't we?
Perfect fit.
We've only got these two half sheets,
which is 75mm,
but we have got an old,
I think it's only 50mm though,
but as I said before,
there's no regs to it.
Is there?
No.
So we can put that 50mm down and we'll be fine.
It's literally just fine.
Oh, this is just because, obviously,
to give them a little bit more insulation in here,
to be honest.
What I might do is leave that,
shall I go and leave that square there,
and then put that in with that small stuff?
Can do, yeah.
Yeah, why not?
Might have enough there actually,
so I'm going to cut it in half.
Might have enough,
I think we might well do.
I think you're right.
Come on.
Where is that tape, Mr Sam?
Here now, here, look.
Joe, get me a saw, bruv.
Joe's knocking up the concrete.
Yeah.
Right, I'm going to come out there
and say I'm going to cut this out there, mate.
See the head height here is so low,
you've got to be careful.
Smash your head off.
I haven't.
How many times have I bit that head?
I haven't.
Tell you what I'm going to do,
while that's draining down
for the last five minutes,
I'm just going to chisel
a little bit more out my wall there
to get our pipe up.
He's working all day,
we're here all day, mate.
I thought you said something there, mate.
Give me the answer,
because I thought you said something
because while we're doing the job,
we got pulled off the other job today
just to help get this moved on.
What did he say?
He moaned about the barrow and the mixer.
I told you, bruv, he said something.
What about the barrow?
He moaned about it,
getting worried they'd bring their own barrow.
It's in the other job, bruv.
Yeah, it's a barrow,
not the mixer.
It's that tape measure, mush.
Yeah, and then he mentioned about you though, bruv.
He didn't say anything,
but I don't think he did.
Why, is it his barrow?
Is it his barrow?
Yeah, yeah.
You know what I mean?
Jesus Christ, mate.
Shall we go into that then?
That one man there in 20 blocks,
he's in two labourers.
He's in two labourers.
20 blocks away.
And his other labourer's a load of shite.
That's why, eh?
I see yesterday, Joe,
you had Lee standing by the mixer,
mixing the gear up,
and you going to the mixer
to get the gear,
to give it to the client.
Ten feet away.
I know.
And when you were putting the bricks in the pallet,
when you were putting the bricks in the pallet.
Oh, we've got this, Joe.
Don't you worry, mate.
We've got your back.
We know.
Don't worry, bruv.
We don't miss a trick, us boys, mate.
Everything and more.
And a bit more.
More than you can imagine.
Sit tight there, bruv.
That wall goes up there.
I don't know how that wall goes up there.
Yeah, grab this up there a little bit.
That wall kicked out there.
Don't want it to start hanging
and hitting about too much.
You drained that off, didn't you?
Yeah.
Still drained you there?
Yeah.
Good do.
Perfect.
So, the pipes, what we're going to try and do here, mate,
I'm going to try and obviously cut into them here.
It's that tape, Joe, out there on the side.
I'm going to try and get into them here, bruv.
If I can.
They need a good, good cleaning up, though.
A couple of fittings on them.
Joe?
Yeah?
I want a bit.
Drop it down.
Lovely.
180.
Yeah.
180 fits.
Yeah.
One metre.
There's a chisel.
I don't like that.
No, it's not nice, is it?
No, it ain't.
That's that way.
Wipe it out.
What I might do here,
because these pipes are right,
you want to bust that off as well.
Horrible?
Yeah.
Well, because these pipes are right horrible here,
I'm going to,
when we cut it,
I'm going to cut,
I'm going to put two isolators there
just so we know
we're not going to get any leaks on them
because they're old, old pipes.
Look at the state of them.
Yeah.
So, try and solder them.
It's going to be...
Am I perfect?
No, no, no.
We'll just put compressors on there.
Two isolators there.
Bring it through.
Give me that straw, mate.
Always pass it that way, don't you?
Cheers, Joe.
You know, don't you, brother?
Joe ain't a bad boy, really.
He gets lost in a moment.
Joey.
We like having Joey, I think.
He gets lost in a moment all the time.
What, is it bad I'm a cheating wolf's clothing?
You are, mate.
You get lost, look.
You have two days helping the Brickies out
and all of a sudden...
Yeah, forget the keys.
Got to keep Joe on his toes, you see.
Let him know we're in breadbuck.
Forget, don't you, brother?
How did he start the pool?
How you got a number of keys?
Joe's out helpful, gladly, Brad.
Joe is, yeah.
Joe, love having Joe out, mate.
Really helpful.
Never whinges here, unless he probably whinges
behind your back like anything.
He never whinges, Joey, about doing anything.
Do you, Joe, really?
Probably does when we weren't out there,
you say, you pair of idiots.
But when you give Joe a task to do it,
it'll be done.
And a lot of the times, a lot of labourers...
Joe is a little bit more of a labourer,
but a lot of labourers...
Where's the tape gone?
Oh, sorry.
A lot of labourers, you have to task them
and give them your detail, what you want done.
You've got to micromanage them,
haven't you, Brad?
Minute by minute, you've got to tell them
how to do it.
Joey will just get on with it and do things.
Sometimes do it wrong, but I learn from it.
It does, yeah.
We all do it wrong, son.
The old woman moans me every night.
Every night?
Every night.
What?
Hold on.
Now, hold on.
Every night will I be home?
Yeah!
I cook dinner every night,
it tells me it's wrong.
Oh!
I'm wondering where I'm going to need that.
I'll show you how to do these couple here,
and then I'm just going to crack on.
Yeah.
So I'll show you how to solve
these couple up over here.
Do you want to...
Let me jump out.
Get out of the way a minute.
All right, so make sure my fittings
are still pushed in.
See, Brad's been playing with the pipe
over there a little bit.
Yeah.
So I'm going to show you how to do this.
I've normally got a little cloth to hand,
but I think I left it at the shop last night.
There you go.
All right, I'm using map gas here.
This gas burns hotter than the normal gas,
but it's the gas I like,
it's the gas I was trained with.
The other gas, it takes a little bit longer
to heat up your pipe.
So, right, you want to get your gas.
What you want to do,
where you've got your torch,
in your torch, if you can see it,
you can't see it here, really,
because of the light.
In the centre of your flame there,
you've got a cone.
I don't know if you can make that out, Sam.
You've got a cone in the centre there.
That's your hottest point of your flame,
is that cone.
So you want that in the centre of your fitting.
I'm heating up this fitting here first,
because it's going to transfer the heat
onto the next one.
As you can see,
my fitting is nearly there.
Little bit of solder on here,
capillary action starts to kick in.
I'm going to overdo these with solder.
It's not face work, it's underground.
I want to make sure I don't get a leak on it.
That's that one done.
You wouldn't normally go,
if you were trying to make it look a bit pretty,
you wouldn't normally go that deep.
In all fairness,
that fitting's a little bit burnt,
if that was face work,
but I don't want it to leak.
You only get one chance,
you're not on the concrete floor,
you've just got to go OTT, I guess.
Yeah, you've got to go over the top of it.
If you're doing face work,
turn your flame down a little bit.
Your fitting will take a little while longer
to heat up,
but you can get a neater solder run with it,
and your fitting won't go black.
I can clean that up if I really wanted to,
just let it cool down and clean it up.
A little trick I'll do
is get a little bit of flux on your brush now,
and just run that round.
Your last little bit of solder,
just run round,
and it'll clean up your joints really.
Look, Sam,
if you come in a little bit closer there,
you'll see there's quite a lot of solder on there.
I don't really need that much solder,
but I just want to make sure
that it's not going to leak.
And if any of you have ever seen Tony's work,
you know he does nice neat work anyway.
Yeah.
The exterior, when you can see it.
Yeah.
But under the ground,
you just don't want it.
Just overkill.
You need to go overkill, don't you?
Just in case.
Alright, so that's them two.
A bit later on,
we'll do a proper how-to
on soldering.
I'm going to have a go.
So Brad's going to do it.
So I'll talk through
how it should be done properly,
how they teach you in college
to do a bit of soldering
by the book.
And then you can follow that
if you want to have a go at home.
Get yourself a little bit of copper,
a couple of little elbows,
or whatever you've got,
a couple of couplings,
and have a go on it.
Right, OK,
I'm going to move on, Sambo.
And I won't fit it yet
until that's gone off a bit.
You don't want to move them fittings.
Let them set for five minutes.
And last couple of days,
there's going to be
a membrane on top of that now.
Well, Denso them pipes up.
Once they've cooled down,
give them five minutes
when he's finished,
have a cup of tea.
Denso them up,
another sheet of membrane on top,
and then the concrete pour.
They're going to,
I think they're going to
live with the concrete, actually,
for about a year.
But they are going to redo it
and put some brick,
some sort of brick effect
on top of that.
So we're going to make it
semi-smooth,
as smooth as we can get it.
It's concrete, it's hard core.
It's not really a finished product
unless you put a polished
concrete over it, machine.
But we're getting it
as smooth as we can.
I did ask him to pick me up
a concrete smoother with an arm.
How am I going to get over
the back there?
What, like a tamper?
Tamper, yeah, with the arm.
But he never got me one.
And I ain't got one.
So we're going to have to
figure that out, aren't we?
Because I ain't going to
be able to reach over there
with the trowel.
Not timber.
Timber.
Make the long arm up
with the timber.
Make the long arm up with the timber
so we can just shudder it through.
All we're going to make
is basically a broom,
but instead of having the bristles
on the end of the broom,
like this.
So I need something with an arm,
with a header piece,
but without the bristles,
I want that smooth.
So basically if you chop
those bristles off,
you could use that.
Basically what I want to do
is just tamper it through
and smooth it back.
Smooth, like that.
