jardinière Wicking bed mise en serie

La-Malle-en-coin
79 followers
13 Video Views·Jan 21, 2023
Bonjour, aujourd'hui un projet qui n'est pas une malle, I'm not going to go into detail about this project.
But this is a command client during confinement.
On us a request to manufacture a pair of gardeners in wicking bed,
I mean, in water recovery, in water recuperator.
And I was able to test two or three different methods of manufacture,
and especially of sealing.
Because the principle is that the gardener must be waterproof,
and recovers the water at about a third of its depth.
So to do this, here we have manufactured the gardeners in chain,
They are assembled directly with the domino machine from chez Festool,
Collies, the feet are treated.
So here I used a very special epoxy resin called waterpox,
This is made to treat wood with water.
It's basically a kind of plastic hardener, it actually plasticizes.
So I dipped the wood in the bottom of the foot, so as to really soak them,
And as you'll see later, I've also passed an outer and inner layer
on the totalité de la jardinière et du chêne, the whole of the gardens and the oak trees,
to really protect it from water,
Since a gardener by definition, it takes the fleet, it's outside, it moves,
It's a little complicated for it to withstand.
And I wanted a relatively modern design, that is, square,
I'm going to throw out some of the classic, traditional gardeners.
And you'll see that I've made a system where the first gardener pour into the second,
In any case, in terms of water recovery.
So here we go, we're gonna go to the waterbox, we're gonna drink,
Plus you have a porous wood, plus this drink.
Most of the time it's done in several couches.
And here I have arranged in addition to the armatures that will protect the angles,
To make sure my product doesn't get stuck.
And here I used a product quite innovative for me anyway,
which is called du bituflache, which is a kind of bitumen or a goudron
The wood is then placed in several layers to seal the wood completely.
So there's one drawback, is that this bituflache requires 15 days of drying
and pose in several couches.
So we're gonna lay a first couch diluted with water,
Which will allow au bois de bien to drink.
I've added in fact the armor integrated in the bituflache
And I poured my goudron or my bitumen.
It's a product that's often used to make cuvelages.
In the garden directly.
Then, off camera, I made a second couch, a third couch
And it's at the end of the third period that you have to wait 15 days for it to dry.
In these 15 days, the gardeners will pass them to the client,
Since I'm there I'll arrange the whole thing.
And I'll show you how it works on another model.
But in general, at 11 cm from the edge, on this side of the gardener,
I installed an embotted compatible Gardena.
I chose to put it in laiton to avoid any trouble.
A small sealant system all around the systems
And you have a stake that is laid.
So a little rough plan on how to lay the spikes.
They're directly fastened between the flash and the oak.
And on each side I put a joint.
And then you have a watering pipe that will connect the two gardeners
knowing that the first one has a hole of 12 cm, then 11.5 cm, then 11 cm
And the last one actually has a 10cm hole.
The gardeners can be filled directly by these pipes.
But you'll see in another video another gardener
a system of sealing which is a little more elaborate
And this is simply a plastic bag that I use to make the seal.
And I wanted to show you how it works.
You have in mind the PVC pipes that are filled with sand.
Then I fill the PVC part of the gravel up to the top of the trunk.
I'm sure you can see the bottom.
Once the totality of all this is filled with gravel
I'm going to pass a geotextile.
Here the gardener is a little bit more bricolée
Since I didn't have a bit of flash at the moment I did it
And this is me, not a client.
On the ground well the gravier, on the pose the geotextile
taking care to place the geotextile over the hole of the trop-plein
de façon à ce que l'eau puisse systématiquement sortir par le trop-plein (so that the water can systematically exit through the trop-plein)
And in fact you see the geotextile coming overhead.
Then on the ground, of course.
We're going to fill up the whole la jardinière de terreau.
The advantage is that the whole waterproof part of these gardeners
It will conserve the water much longer.
So we can fill it in two ways, either through the pipe here
And at that moment, through the trop-plein, the water comes out when the water reaches the level of the gravyards.
So it will allow your soil to keep moisture much longer
I've got a classic gardener.
So here you see the trop-plein starts to move.
Or alors, autre solution, on branch directement le tuyau sur l'embut Gardena or on branch directly le tuyau sur l'embut Gardena or on branch directly le tuyau sur l'embut Gardena or on branch directly le tuyau sur l'embut Gardena or on the other side of the Gardena
And we'll fill his gardener's directly in that way.
Voilà, I hope this video has surprised you or that you have enjoyed
And I invite you to do the same, of course.
A bientôt!
