基本の水引「あわじ」の作り方

Wrapping Ideas
85 followers
41 Video Views·Jan 11, 2023
Konnichiwa, Koko Koro Sensei desu.
Today, I'm going to show you how to make this.
It's called Awaji Musubi.
I'm going to show you how to make this.
It's the same as the one you see in Goshiugi Bukuro.
I'm going to show you how to wrap this beautifully.
Let's get started!
What you need is this water draw.
Water draw is about 90cm long.
I'm going to cut this and use it.
This time, I'm going to tie three of them together.
I prepared three colors.
And scissors.
Please prepare this.
I'm going to cut the water draw.
I'm going to use half of it this time.
When you cut the water draw,
If you cut it in half like this,
the tip will be bent and it will be difficult to tie.
If possible, cut it in half in a straight state.
Or, when you bend it, don't cut it in half.
It's easier to tie if you cut it in half like this.
Now I'm going to start tying the water draw.
When you start tying,
First of all, where you want to make it round,
For example, if you have three, tie them together.
I'm going to squeeze it a little bit like this.
I'm going to make it soft.
I made it soft like this.
This part became soft.
I didn't squeeze the tip.
What happens if you squeeze the tip?
Everything becomes soft.
If the tip is soft when you tie it, it will be difficult to tie.
If possible, only where you want to make it round.
Don't squeeze the tip.
Squeeze only the center.
Then this is the completed shape.
This is the water draw.
Before you start tying this,
I tried to explain how to tie it in words.
First, Shizuku.
Then, Kuji.
It's the 9 o'clock in the clock.
Then, Hiragana no me.
And then, Sasu.
Please remember these four words.
First of all, what is Shizuku?
First, make the shape of a drop.
Next, place the water draw at the 9 o'clock in the clock.
Then, Hiragana no me.
Next, Hiragana no me.
And then, Sasu.
That's the image.
Now, I'm going to tie it.
First, I'm going to tie it with one water draw.
First, place the center at 4.
And then, Shizuku.
At that time, make the shape of a drop so that the right hand crosses the top.
When you make the shape of a drop,
there is a dot.
Hold the dot with your right hand.
When you hold it with your right hand,
the left side of the dot,
where the clock is,
this is the clock.
It's an analog clock.
The 9 o'clock in the analog clock is here.
Place the left water draw at the 9 o'clock in the clock.
Just place it from above.
When you place it from above,
you can make a dot here again.
Hold the dot firmly with your left hand.
When you hold it, let go of your right hand.
It looks like this.
If you put this on the left,
it looks like Hiragana no me.
If you can't see it like this,
stand it up so that you can see it as a dot.
Next, I'm going to insert this Hiragana no me.
Bend the left water draw.
Bend the right water draw.
Above the right water draw.
Next, behind the Meosasu.
In front.
Behind.
In front.
If you insert it like this,
Awaji Musubi is complete.
Now, to make it easier to understand,
I'm going to tie it with a big rope.
It's divided into white and red.
First, the shape of the drop.
The right is up.
Make the shape of the drop.
When you make the shape of the drop,
hold the dot with your right hand.
When you hold it with your right hand,
assume this is an analog clock.
The position of the 9 o'clock is here.
Bend the left water draw to the position of the 9 o'clock.
Put it on top of the 9 o'clock.
If you put it on top of the 9 o'clock, you can make a dot here again.
Hold the dot with your left hand.
Let go of your right hand.
If you tilt the water draw to the left,
it will look like the eyes of a hiragana.
When you make the shape,
put the left string on top of the right string.
Next, pass the eye through the string.
Put the string on top of the bottom string.
If you pass the eye through the string like this,
Awaji Musubi is complete.
Now, I'm going to show you how to make it in three ways.
As you can see, the outside is red,
the middle is white,
and the inside is green.
When you put the dot on the dot,
the water draw will always point to either side.
When you put the dot on the dot,
the water draw will always point to either side.
Hold the dot like a U shape.
If you hold it like this,
it will be difficult to tie the knot.
Hold the dot like a U shape.
Now, put the three dots together in a droplet shape.
At this time,
rather than holding it firmly and bending it,
hold it gently and pull it.
Don't put too much pressure on your thumb here.
Hold the dot with your right hand.
Put the three dots together in a droplet shape.
Hold the dot like a U shape.
I'm going to put the left water draw on the dot.
If you put the dot on the dot,
it will be messy inside.
The order will be weird.
First, bend the right hand first.
Now my thumb is up,
but this time,
I'm going to bring my thumb down.
Hold the dot like this.
If you hold the dot,
don't let the order change.
Hold the dot like this and bring it up.
Bring it up as close as you can.
After bringing it up,
hold the dot firmly like this.
Bring it up to the top right.
If the tip of the dot is out of alignment,
align it so that all the dots are aligned.
Then it's easy to tie.
If the order doesn't change here,
don't worry about how messy it is here.
It's not out of alignment here,
so it's not out of alignment here.
It looks a little messy right now,
but don't worry about it at all.
Just pay attention to this part.
In this state,
tie the back, front, back, front.
At this time,
be careful not to move the back, front, and back like this.
Instead, move the back, front, and back.
If it's hard to get through here,
move the back, front, and back.
If you do it like this, it will look beautiful.
When you get to this point,
the order here is already neatly arranged,
so pull one by one from the top green.
Next, pull one by one from the green.
Green.
Next, the second one is white.
White.
And finally, the outside ring, red.
If you pull this in order,
it will be naturally arranged here.
Tie it like this.
Next, I'd like to show you how to shape it.
I'd like to show you how to shape it.
Doesn't this shape look like something?
This is the face of an insect.
I look like a fly.
If it's a fly,
this is the mouth.
This is the eye.
This is the jaw.
It looks like a fly, doesn't it?
Let's make it look like a fly.
This is the inside of the eye of a fly.
It's up here.
Pull both of them to the left and right.
Then the mouth will get smaller.
When the mouth gets smaller,
hold the point lightly so that it doesn't get bigger.
Next, I'm going to make the eyes smaller.
I'm going to pull the right side up.
One at a time.
I'm going to shape it like this.
It's long, so cut it where you like.
It's done.
How was it?
This time, I showed you how to make Awaji Musubi.
It can be used for various wrapping.
The last thing I made was this Arigatou sticker.
Stick the Arigatou sticker on the back of the Awaji Musubi.
Put double-sided tape on the back of the Awaji Musubi and stick it here.
It's done.
You can also change the size of the ring.
For example,
let me show you.
You can use it like a star.
I changed the place to make it bigger.
Tie the upper part of the Awaji Musubi and make it look like a star.
Tie the upper part of the Awaji Musubi and make it look like a chestnut.
This is the same Awaji Musubi you usually see.
But it looks a little different.
The bottom part of the Awaji Musubi is hidden behind the gusset bag.
So, it's the same Awaji Musubi.
Enjoy making it.
I'm Akemi Tahara, a wrapping coordinator.
I'll show you how to make a one-rank-up wrapping using Japanese paper.
Please refer to it.
