EXPERT SHARPENING ADVICE FOR BEGINNERS!!! (Patrick Roehrman)

Kramer Ammons
208 followers
Patrick Reohrman Gives some priceless advice to all beginners wanting to sharpen knives. This advice is for much more than just beginners but for everyone wanting to sharpen.
#Beyondsharp
#Sharpeningadvice
#beginersharpening
#knifesharpening
#Razorsharp
All right, I haven't done this in a long time. I might end up hurt.
Where's the camera? I don't want to let go. Hey guys, am I in focus?
Hey guys, we got bonus footage today. That's right. Yep, we got some expert knife blade
sharpening advice from our friend Patrick. So check this out. This is a bonus video. Hope you enjoy.
The first time sharpening a tool is always going to take the longest because you're trying to,
especially in a tool like this, you've got a lot to repair.
And so this is why, you know, I made the comment on my sharpening video
to not start with a knife that's overly dull. And somebody's like, this video is lousy because
the guy starts off by telling you to sharpen a sharp knife.
And that's not exactly what I was saying. What I was saying is don't take a restoration project
that's over your head trying to learn where you're going to get discouraged and you're going
to give up. And a lot of times people, you know, even just like anything, remodeling a home or,
you know, um, you know, if you, if you take something that's way beyond what your capabilities
are to start out, you're going to give up and lose hope. You're saying to kind of start on level
one, not level 10. Yeah. So take a knife that's new, that's lost its cutting edge. And really
honestly, you can start off with a knife that's new because new knives don't come sharp, you know,
90% of the time, probably 99% of the time companies are not giving you a knife that is
really sharp. So if you start out with that, start out with something that's kind of dull,
slightly dull, there's a better chance that you're going to get instant feedback
on your sharpening. And you're going to figure out right away, Hey, you know, I'm doing this right
rather than get going. And cause when you start from the beginning, you don't
get that instant feedback of anything really like, and then people just get discouraged.
If you start with something that's really bad and you go, you start second doubting yourself.
Yeah. I've done that changing techniques and you start, you know,
like chasing your tail, but there's, there's something, you know, whatever, but basically
you start just, you know, like with archery, right? So if you can't, if you're not getting
solid feedback and you start changing multiple things, you're never going to figure out what
you're doing wrong because you're changing too many variables at once. You need to change one
thing at a time and say, Oh, Hey, that helped or that didn't do it. Yeah. So when you're talking
about earlier, scraping with a drill knife, it just, it makes me want to cringe because
the edge of a knife that is sharp is thin. So when you're cutting, your strength is behind the edge.
The minute you try to take and scrape with that edge, you roll the edge. And then if you try to
back and cut, it's not going to cut. So the knife is designed to put the strength. So this
edge is going to be designed to cut and we're going to have enough strength build up behind
the edge and it can handle that. It's not designed for scraping because we're going to roll that edge
and then it's not going to cut well. So that's why you need a tool for scraping and a tool for
drill knifing. Aren't scrapers at a 90 degree angle basically? Yeah. So actually what you want
to do with a scraper, you want it perfectly flat and perfectly 90 degrees. And then they have a
tool for burnishing that's a hardened like ceramic or something. And when you roll it on there, it
rolls a burr on the edge and then you're using that burr for cutting. So when you scrape,
that burr is actually doing the cutting. And it's so small you can't really see it much, but I see.
