How to Make a Hanging Sleeve | A Shabby Fabrics Sewing Tutorial

Art Bond
128 followers
43 Video Views·Dec 27, 2022
How to Make a Hanging Sleeve | A Shabby Fabrics Sewing Tutorial
Hi, it's Jennifer from Shabby Fabrics.
Today I'm gonna show you how to create
a hanging sleeve for projects.
Now, specifically, these are from the
A Year in Words Wall Hanging Club.
This is a Shabby Fabrics exclusive design.
We have a new project for each month,
and in our previous series, we've had hanging tabs.
Well, we're discovering that I think we like
our sleeve in the back even a little bit better
because it just kinda helps the craft hanger
to kinda just settle into the project
versus kinda being above the project.
So I wanna show you the back of that,
what that looks like.
If you've never created a hanging sleeve before,
I'm gonna show you how.
It's super simple, and for a lot of quilts
that go to a quilt show, you're required
to put a hanging sleeve on the back of your quilt.
So this information does translate
not only to these cute little projects,
but also relate to any hanging sleeve
that you'd wanna add to a quilt.
Again, potentially for a quilt
that's about to be judged in a show,
or maybe you just wanna display it that way in your home.
The first thing that we're going to be doing
is you'll put your binding on as you normally would,
except we're going to leave the top.
We've stitched down everything else.
We've left the top portion open.
I'll show you why we're doing that.
Now, the width of this particular wall hanging
is 10 1⁄2 inches.
You don't really want your hanging sleeve
to go all the way to the edge,
or you're running into the binding that's already sewn on.
So you're going to be coming in from the edges
a certain amount.
For a larger quilt, it could be as much as five inches.
In this instance, we came, our hanging sleeve,
we started with a piece of fabric that's two by nine.
So these are 10 1⁄2 inches wide.
So it's just, you kind of figure out your hanging sleeve.
Let me show you this one more time.
The hanging sleeve is inside
from the edges a certain distance.
So if it's not exactly two by nine,
in this instance, two by 8 1⁄2, it really doesn't matter.
The whole point is you want to create stability in the back
for the hanger to beautifully display
whatever project that you're working on.
We are going with a two by nine to start with.
And that is also part of what's in your binding kit.
Now, what I'm showing you today is included in instructions
in your A Year in Words wall hanging kits
if you're purchasing those.
I wanted to show you what it is though in person,
how to do it, because it's a little easier to see it,
you know, when someone shows it to you.
And it's new for us at Shabby Fabrics.
All of our previous wall hangings have been from the tab,
so this is new.
We've got our two by nine,
and we'll be using our hot ruler today.
I love this, and our Panasonic iron, which is cordless.
I love this, because sometimes in my sewing room,
I'm a far distance away from my project,
and I run out of cord.
The first thing we'll go ahead and do
is we're gonna measure down a quarter of an inch,
and I have my quarter inch mark here.
I want you to see that in the overhead camera.
There's my nice quarter inch, so I don't have to guess.
I can just bring that edge up and move my ruler over.
It's amazing how much heat this ruler can take.
We've used it over and over and over,
and it looks brand new.
It's incredible how this is a heat-resistant material.
This is from Clover.
Their projects are engineered in Japan,
and they're of the most,
they've really thought things through.
Just like this.
Previously, when I would do a seam
of a quarter inch or half an inch,
I'm kind of guessing,
or kind of following along with the ruler.
I love that these products solve real problems
that we have in the sewing room.
So a quarter inch folded down,
and that's how you use the hot press ruler.
Now, just to keep things speeded up,
on the sides, I'm gonna fold in a half an inch.
Again, just find your half inch mark.
It's that line right there.
Put that on your fabric.
Bring it over and press.
We've done that on both ends.
You'll go ahead, and you're gonna sew
just about an eighth of an inch on those two ends.
Don't do, you don't need to do anything
at the bottom at this point.
You could, but it's harmless to leave that like that,
and I'll show you why later.
So we only put an eighth of an inch
seam allowance on those two ends.
So let me get rid of these other two.
Now, we'll go ahead and take this to our project.
You can either just visually try to find center,
or you could fold this project in half,
mark it with your friction pen of where that spot is.
That way, your hanging sleeve is exactly
at the midpoint of your project.
And I can just either put a crease in that
with my fingers, or I could mark it.
Let's just crease that with our fingers.
Now, the part that has the folded edge
is gonna go down, and the raw edge is gonna go up top,
and I'm gonna match my drawn line.
I'm gonna make sure the overhead camera can see that.
The drawn line for where my crease is
that I just kind of finger pressed.
Now, you'll want to go ahead and pin this very well,
because when we first put the hanging sleeves on,
we noticed that they wanna creep.
When you sew them down,
they just kinda wanna travel with you.
So be sure you've gone ahead and pinned this well
so it doesn't move on you.
Now, when we're sewing that down,
we wanna sew with less than a quarter of an inch,
so I'm gonna suggest an eighth of an inch.
If you go a full quarter, you risk going,
having those stitches showing on the front of your project.
Now, I want to make sure that I don't inadvertently
sew these bindings.
They could easily get a tuck under there,
so I'm gonna use my Wonder Clips
to tuck these out of the way.
Let's go to the sewing machine,
and we're gonna sew that quarter,
excuse me, eighth-inch seam.
I'm so used to sewing a quarter as a quilter.
I almost don't know how to not do that.
Okay, so now we've got the upper portion secured.
Of course, we need the sides open, right?
And we need to have the bottom tapped.
At this point, you're going to finish the project
as you normally would the binding.
I like to use my Wonder Clips
just to clip everything into position.
And whether you choose to bind by hand or by machine,
whatever method you do, you do that at this point.
And then for the bottom of the hanging sleeve,
it's simply a whip stitch.
Here, you know, don't get too loose.
You want to have it secured,
but primarily, most of the tension
will actually be in the upper portion of the hanging sleeve.
But go ahead and do a whip stitch across the bottom,
and that's all there is to making a hanging sleeve.
