Japanese woodworking - Hand Planing Beams to Finish them

Shoyan Japanese Carpenter
89 followers
12 Video Views·Dec 24, 2022
Hello, this is Shoyan, a Japanese carpenter.
Today, I'd like to show how to plane timbers.
There are curved timbers, large timbers,
and many kind of timbers.
I'd like to plane all of them.
These are my planes.
This is a curved plane called soredai.
This one is called arashiko or banarashi,
which is used after electric plane
to make the surface straight roughly.
Then, finish it by this kind of plane.
Before starting it, sharpen the blade of the plane.
How to sharpen blades depends on the person.
A long time ago,
when I saw many carpenters sharpening blades,
it was interesting that each carpenter had their own way.
First, plane the timber by electric plane.
Erase the marking which I drew
and polish small scratches made
while cutting it out by electric plane.
Then, finish by manual plane.
The setting of the electric plane blade was wrong a little bit,
so the surface needs to be modified.
Maybe it will take time to make it straight.
Now, the surface is straight.
Then, complete it by plane for finishing touches.
I haven't used this plane for a long time,
so it's not in good condition.
Maybe it will be getting better soon.
There are many videos that show
how to finish straight timbers by plane.
But in fact, we carpenters have to plane the timbers
that are originally curved or rugged
after making them straight by electric plane.
So, this work is hard, actually.
In the first place,
the purpose of planing is to make timbers glossy.
By planing timbers,
resin appear on the surface of them.
That resin is water repellent
and also prevents timbers from getting dirty
when they are used outside.
That resin works like coating,
so it prevents stain from soaking
into timbers when wiping them.
So, resin has a function like coating.
That's why we have to plane timbers.
Now, I finished one surface.
The top side gets glossy
by planing towards this direction.
But the bottom side gets glossy
by planing towards this opposite direction.
This is because of the character of timbers.
The direction of planing to make a timber glossy
is different between right side and left side.
I have been told that a professional carpenter
doesn't have to change the direction for a long time.
But I still think that it's better
to change the direction to make it clean.
I can guess which direction is good to planing
to make it glossy.
But I cannot be confident before planing it, actually.
Then, plane the bottom side.
The bottom side is curved,
so finish it by curved plane.
The curve of the plane is sharper than that of timber.
If you pull the plane slowly,
the surface will be rugged.
So, fix your wrist not to move
and pull the plane fast.
Next, finish the top side.
The top side sticks out, so it's not very difficult.
It can be finished by normal plane easily.
OK, now it's completed.
You can see it's glossy.
Next, plane the beams that I connected in the last video.
Let's finish it by plane.
Modify the shape of the beam as well,
then finish it by manual plane.
If you connect two timbers in a workshop,
of course, the length becomes two times.
The difficulty of planing also becomes two times.
But if I connect them in the site,
that erection work will cause some damages
and misalignment.
That means it's necessary to modify it
by planing once again at high places on scaffoldings.
It's very dangerous.
So, even if it's difficult to plane connected timbers,
it's better to connect and finish them in workshop in advance
to make it clean-looking.
The finished surface becomes the bottom side after turning it.
So, put shavings on the stands
to protect the finished surface.
OK, now planing is completed.
This beam is made of two timbers
whose grain and characters are opposite.
So, it was very difficult to plane it.
Then, let's plane the straight beam as well.
This beam is made of the portion called akami
that is the center portion of the section of logs.
The beam made of only this akami portion
is rare and luxury.
It will get glossy by planing well.
So, it's very versatile.
I still have many timbers to plane today,
but let's finish this video.
I hope you could learn planing
that makes timbers get glossy and beautiful.
That's all for today's video.
Thank you very much for watching this video.
