💯 The Shatterproof Ultimate Armguard on Amazon Prime!: https://geni.us/DclX8 [Amazon] 💯 The Shatterproof Essential Armguard on Amazon Prime! https://geni.us/YtvqY0 [Amazon]
MY FAVORITE PRODUCTS & RESOURCES! ⬇️ 🏹 Archery Gear 🏹
Hey guys, welcome back to the cave.
Today I'm gonna show you how to make
a reflex-deflex longbow.
Making bows sometimes can go a little bit like this.
You're all antsy, you get all excited,
you finally got this piece of wood
you're gonna make this awesome bow out of.
Then you carve on it for like 10, 15 hours,
taking your time, making sure everything is perfectly right.
Then all of a sudden,
as your beautiful piece of art is coming together,
it goes like this.
I'm so glad this bow's looking so good.
Man, it sucks.
And that's why today I'm gonna show you
how to make a reflex-deflex Ipe-backed bamboo bow
and how to avoid all of the bow shattering
mistakes you might make.
Let's get right into it.
Here is my current stash of Ipe.
And I have some bamboo here behind me as well.
The difficulty of buying bamboo in Ipe,
for me at least, is that nobody sells it around here
so I've got to order it online,
which means shipping prices can rise.
Especially if you're using Ipe
because it's so dense and so heavy.
With one board you can pay $30 to $50 a shipping.
But if you have a bandsaw,
out of one board you can make more than one bow
if you can rip it down, so that is nice.
In order to buy both of these materials,
just do a Google search,
you can find some on Ipe sometimes.
And the Ipe you can normally get from a decking company,
that's where I found it, for the cheapest price.
Now personally, I use some templates to lay out my bows.
Also, once I've laid it out with my template,
I can just use that blank as my new template
and I can save a couple cuts
by laying that template out on the original board
and cutting the shape out of the bow first
instead of ripping it into straight lines.
I feel like I found a really good way
to lay out these Ipe bows and this is how I do it.
The handle section lays out to just over an inch and a half.
That's an eight inch section.
And at the tip of my limbs it's five eighths of an inch.
This is the rough dimensions,
this is the dimensions I'm gonna use to glue up the bow.
After it's glued up, I'll take the limb tips
down to closer to a half an inch
and the handle section will come down also.
I kinda do a pyramid style bow
where it tapers the entire length of the limb
from the handle section all the way down to the limb tips.
Now, after you've got the bow cut to shape,
you can rip it in half so you've got two bows
out of one board, which is really nice.
You just gotta be really careful
to get it in the center as much as possible
or else you've got a chance of making it too thin
and end up ruining one of these bows.
The next thing we need to do
is flatten this board on a belt sander,
the biggest belt sander on the planet.
You don't just wanna flatten the side
that the bamboo's gonna go to.
You wanna flatten the other side where the handle's at now.
It's a lot easier to go ahead and flatten the handle side
now than after you've put the reflex
and deflex into the bow limbs.
With the Ipe ready to glue up,
it's now time to trace out this shape onto the bamboo
and then cut it to size.
Something you don't wanna forget
is to space the nodes evenly out on the bamboo.
So from this node, I should have three inches off
and then all the way down here, three inches off,
and then it'll be equal for every single node along the way.
That'll make tillering much, much easier.
Some bamboo is not completely straight,
so you just have to lay out the Ipe on it
to figure out where it lays out good.
It might be slightly off to the center
and that'll be completely fine.
Okay, so we're at a very crucial part.
The first couple bows I made,
I didn't thin down the bamboo enough.
And you may have seen that first video
I tried to have a bow shoot over 200 feet per second.
That was my problem.
Very simply fixed,
you just wanna take down more of the bamboo.
Some bamboo's a lot thicker than others.
Some of the bamboo, I'll just take directly
to the belt sander, make it smooth,
and make sure it's thin enough.
Some of it's extra thick like this piece.
So what I'm gonna have to do with this piece
is rip it down on the bandsaw
and then flatten it on the belt sander.
The question is, how thick should it be?
I've experimented with a bunch of different thicknesses
and I found it doesn't really matter how thick it is
as long as it's not too thick.
So what is too thick?
I'd say if you get up to a quarter of an inch,
you're pushing too thick on your bamboo.
Now, if you're gonna do a really high poundage bow,
that's not gonna be bad to have that thick of bamboo.
I prefer to shoot right about 1 1⁄8 of an inch
thickness on bamboo, which is 3.175 millimeters.
Get it to that thickness
and that's like the sweet spot, I think.
That's what I shoot for, or at least around there.
And then you just make it consistent
throughout the length of your bamboo.
If it's a little more than this or a little less than this,
it's not a big deal whatsoever.
You just don't want bamboo
that's thicker than a quarter of an inch.
Now, each piece of wood has different properties to it.
I have made successful Ipe bamboo-backed bows
with well over a quarter of an inch of bamboo
and it'll still work, but you want more Ipe
on your finished bow than that in general.
So shoot for 1⁄8 of an inch.
This is that one thing that just has caused me
the most frustration with making these bows.
So pay attention to this one.
♪♪♪
I think I need to clarify something really fast.
The limb tips is going to be 1⁄8 of an inch,
but at the center, due to the tall crown,
it's going to be closer to 1⁄3 of an inch.
And the reason we can't take the center down
to 1⁄8 of an inch is if we did, you would lose this width.
So it will slightly taper from the thinnest point
all the way down to the thickest point in the handle.
But now that we've got the bamboo and Ipe
matching perfectly, we need to make a power lamb.
A power lamb is a 10 to 12 inch piece of wood
that goes in the handle section
in between the Ipe and the bamboo to make the bow stronger.
I've made these bows without power lambs
and I've made them with power lambs
and I've never had one with a power lamb break
at the handle section.
I think it's worth it to take the extra precaution
to put a power lamb in.
Now, I've done it without power lambs,
the glue up is much easier
and I've had many successful bows that way.
I would just prefer to take the extra precaution
to put a power lamb in.
Now, there's two designs for a power lamb.
One is like a diamond
and the other one's more like a triangle.
I found that I like the triangle shape better
and makes the glue up much easier
and I think it looks cooler
to have the flat piece of the triangle against the Ipe.
So that's how I do my power lamb.
I've done them in between 10 and 12 inches
and I haven't really seen a big difference
on which one is better.
On the tips of the power lamb,
you want to sand them down as thin,
as paper thin as possible
and you want the bottom of your triangle power lamb
as flat as possible so your glue up will go flawlessly.
Then the last thing is a handle section.
Some people like to do two different glue ups
where you do the handle section and the tip overlays later
and then glue up the bow.
I like to do it all at once.
I'm more efficient that way
and I figured out a good way to be able to do that.
All right, so this is the order.
We've got our Ipe handle, our Ipe bow,
our power lamb, and then the bamboo goes on top.
All right, so as far as a bow form goes
for this kind of a bow, it can be extremely simple.
You see, I just got the two by four right here
and then here's for the deflex and the limb
and then I will set one of these two by fours on the end
so I can have the reflex tips.
It'll deflex down, come back up to the handle.
Same thing, deflex and the reflex on the tips.
Now that is how I make a form.
It's really simple, just a couple pieces of scrap wood.
But something I do like to do
is I put these guides here on the side
so that with my handle section,
as I glue it all up together, it can hold it there in place
and I also make the centerpiece
the same thickness as the handle
so that when we clamp it all down together,
it holds together tighter.
Putting some painter's tape on the back of the bow
will save you a ton of time in sanding later
so that glue doesn't get on the back of the bow.
So the process I use to glue up
is I acetone all of the pieces that I'm gonna glue up.
At the same time, I go ahead and put the glue I use,
which is the A40, in the heat box
and that makes it more viscous, viscosity,
makes it flow more so I can smooth it out easier
because my shop is pretty cold.
Then there's the debate of whether
to scratch up the bow or not.
I've seen people say both, I've done both.
The glue recommends that you sand it with rough sandpaper
and then leave it at that point after it's smooth
and go ahead and glue it up.
So that's what I've been doing recently
and I haven't had any problems with it.
I personally use 26 inch bike tire tubes
as clamping pressure.
It creates even pressure all along the bow.
This is the magic.
I've tried with clamps.
I like this much better, even for the handle section.
I'll put a couple clamps on the handle section
to make sure it's extra firm and extra tight,
but I'll only put that on
after I've used the bike clamps along the entire bow.
Most likely, you're always gonna be able to see
some small glue joint if you really look.
Sometimes you'll see it a little bit bigger.
I've had some pretty gnarly sized glue joints that work.
The bow works out just fine.
It's mainly aesthetic I found out
from experience in making these,
but the tighter you can wrap it,
the smoother you can get the pieces of wood
to come together, the better.
The biggest difficulty when gluing up a bow
is keeping things from sliding around.
That's why I put those two pieces on the side there.
A metal spatula is the tool of choice.
I've used plastic, not worth it.
Put glue on every side of everything.
It spreads really thin, though.
Allows you to get a lot of coverage
with a little amount of glue.
Remember, we have the Sharpie line to line everything up.
At this point, I like to clamp it.
Keeps it in place as I scrape glue on the top.
Next is gluing up the power lamp.
EA40 has a two hour pot time,
so you have two hours to work with it.
I find that, though, after about 30 minutes,
it starts getting thick enough.
It becomes pretty hard to work with.
Keep those Sharpie lines in a line.
Now it's on to the bamboo.
Always wanna make sure there's no dry spots.
Then line your Sharpie line up.
At this point, we can wrap the Saran wrap around.
I like to grab two clamps and clip them
right outside the power lamp at the same time
so that the power lamp doesn't slide.
Time for the first bike tire.
I start in the center of the handle and then work outward.
See how it all wants to slide around?
Just gotta be careful.
It helps that this is pulling it vertically straight down.
That keeps it from sliding side to side near as much.
Other thing I like to do is clamp that power lamp,
the bamboo, and the handle sideways like that,
and that'll keep it from skirting out to the side.
This point, set a clamp on it.
Clamp down over the tire to keep the whole bow
from sliding back and forth.
This will allow you to really put a lot of pressure
on that bike tire to wrap the limb up really tight.
So I put a clamp on either side here
to hold that power lamp, that handle,
the Ipe, and the bamboo all in line this way.
It slides side to side very easily,
so these two clamps are critical.
Next, I have 12-inch marks marked down here on the form,
and right there, I'm gonna go ahead
and put a clamp on the bow to hold that power lamp
down right where it fades out.
I put three clamps in the center
just to hold that handle down extra tight,
just in case I didn't pull the rubber tight enough.
I'll put a two-by-four here on the end,
and then that'll allow me to clamp down
this middle section to get the reflex defect flex look.
You can take this pretty far normally,
but I will warn you, the further you go,
the harder it is to tiller.
I normally try to find somewhere right in the middle
for all the ones I make.
Now all I have to do is measure everything
and match the other side.
All right, now that the bend matches evenly on the bow,
time to put it in the heat oven.
Okay, the glue is cured,
so it's time to take this out of the heat box.
It's time for the moment of truth.
After a bit of sanding, this is what it looks like,
and our glue joints actually look really,
really good on this bow.
I'm excited about it.
Next thing we need to do is tip overlays,
but we're gonna hold that for part two of this video.
This right here, this bow,
is actually gonna go to one of you guys.
I'm gonna auction it off at the end of the next video.
Thanks again for joining me.
Make today count, and we'll see you on the next one.
You didn't think I was gonna let you go that fast, did you?
For everyone who's still here,
I wanna genuinely thank you for being here.
And as we've grown like extremely fast,
what I mean by that is it took us 15 months
to get 1,000 subscribers,
and it took us less than three weeks
to get the next like 30,000.
So I wanna thank you genuinely.
But as my business has grown,
as I've been making this bow making business
and doing this full time and these videos,
the growth is causing me to put new infrastructure in place
so that we can keep up.
So if you've emailed me, if you've commented or anything,
and you feel like I'm not getting back to you,
it's because I'm getting the right team,
the right infrastructure behind me
so that we can move forward together.
So I thank you for your grace as we've grown.
I thank all of you who've stayed this long and watched.
You guys are like hardcore.
I really appreciate it.
And I know if you're still here,
you've given me kind words,
and I do wanna thank you personally for that.
Even if I haven't seen your comment yet,
I really do thank you.
Here very soon, I'm gonna be able
to get a whole lot more videos out, especially this month.
So stay tuned.
Can't wait to hang out with you guys some more
here on these videos.
Also on the lives, on the website, just everywhere.
Go shoot some archery, guys.
Have a good time.
Be positive, smile.
You know, all the things we try to do every day.
And I just wanna thank you.
I'll see you guys later.