Twisted Wire Ornament Hangers!! _tutorial

Christmas decorations
251 followers
8 Video Views·Dec 19, 2022
Hey guys and welcome back to Coutan Crafts. Today I'm going to show you how to make these twisted
wire ornament hangers. These ornament hangers, they look kind of complicated to make. They really
are not. They're made using three colors of wire and they add an extra little something something
to your handmade ornaments. So without further ado, let's get started. Supplies that you're
going to need. Of course you're going to need some wire. I have red, green, and gold wire.
I no longer have the tags for these, but I am almost positive that these are 18 gauge wire.
You could also use 20 gauge. That's perfectly fine. Basically what you want to get is the heaviest
colored wire that you can find. 16, 18, 20, 22, and 24 is just way too thin of a wire. It's not
going to work for these. You put any weight on those, they're just going to bend. So try to stick
with 16, 18, or 20. And these rolls, they're only a few dollars each and these will make a ton of
ornament hangers. You're also going to need a screwdriver, wire cutters, jewelry pliers or
regular pliers, and a drill. Cordless drill is what I'm using here. You can use a corded drill,
that's perfectly fine. So what you want to do is take some lengths of wire. Just unravel these.
I've already done that to save time here. And I've got three strands of wire here. One red,
one gold, one green. Now normally I would use wire that is, you know, three or four feet long to do
this, but I'm just using a, I don't know, 10-12 inch section here just so it fits into the video.
What you want to do is take your ends here and all three of these pieces are roughly the same
length. You just want to take the end, fold this over, fold this over like this. You're just making
a hoop that, like that, that your drill can hold on to. So what I'm going to do is take my drill here
and take this loop here, put it right in, tighten this down because you don't want this to come
undone when you're doing this. So tighten it down nice and firm. Now what you want to do is take your
other end and I'm going to move this so you can see the end. You want to pull your wires straight
as far, okay, as far as they will go. Pull them straight and then take another screwdriver or a
dowel, something that you can wrap this end around. Take these three end pieces and again you just want
to secure this and this is what's going to, we're going to use to hold the wire as we twist it.
Now the reason for the drill is so we can twist this wire and I don't know how well you can see
if we can get this in frame, all of it there. So I'm going to hold my screwdriver here and I'm going
to slowly turn on my drill and you're going to watch this wire twist. Now you want to kind of
put some tension on this, not a lot but some, and you just want to turn your drill on and you want
to go slow here and you can see how the drill twists that wire. Now you need to hold tension
on your screwdriver here otherwise this twist will not be even and you want this to be as even
as possible. So just hold on to this, let's see if I can get the drill tip in there, and you want an
adjustable speed drill here because you don't want to put this on full blast. You're just going to
whip the screwdriver right out of your hand so and you just want to keep twisting this until it gets
a nice clean tight twist to it and that is about what I want. Now you don't want to go too far with
this because you will break your wire and you don't want that to happen. I'm going to give it just a
couple more, that's good. Now don't let go of the screwdriver quite yet because there is some
tension built up in this thing so kind of relieve the tension and then you can take
your screwdriver out. Sorry for all the banging there.
Now release this end of the wire from your drill and here is our wire blank. This is what we are
going to make these out of. Now to get this shape here I just kind of free-formed one of these and
all my others around the one that I free-formed. It's just a generic S-hook shape. You can find
this shape on the Google or put it against the white here, screen cap that, put it into your
paint program on your computer and print it off or trace it off your screen, whatever. It's just a
generic S-shape like I said. So to get this shape I'm going to take a sharpie marker and this is
what I'm going to use to start the first wrap and all I'm doing is holding the end here and I'm
going to wrap this around about one and a third times or so and I'm going to turn this over and
work this way and you just want to unfurl this a little bit so it gets to the general shape of
that right there. That's kind of general shape. I'm going to take my wire cutters and trim this end.
Make sure to use a nice sharp pair of wire cutters so you get a nice clean cut. You're
going to lay this around here and you can see how this isn't quite hooked around like my other one.
So I'm going to take my jewelry pliers here and just kind of pull it around, measure it with
my master. It doesn't have to be exactly the same, just close enough is good like that.
Then you want to mark, just kind of hold where this next one is. So I want to start my top loop
right about there. I'm going to take my screwdriver now and starting there
wrap the other end. This one I'm going to wrap about one and a quarter times, one and a third
times again. You just kind of eyeball it. This one is quite a bit lower than that one so you
want to pay attention to how long these are because you want them about two inches in length.
Get my screwdriver here, curl a little bit more of that and once you get into the hang of things
this goes really quickly. It doesn't take all this fuss and this is the first one I've made today so
this looks about right. Just kind of twist it and make sure that it's
how you like it and then trim off again the extra and there you go. You just kind of want to
bend this flat if you will. If you have a rubber mallet you can
kind of pound on it a little bit. That sets the twist but there you go. That's how you make the
hooks. I'm going to do the same thing on this side or with this end piece. See if I can't get another
hook out of this. It's going to get them in the shape. That looks pretty good. I'm going to
take this and twist this down just a little bit
and there you go. You've got yourself another ornament hanger. You can whip these out really
quick if you use a long three or four foot piece of wire. You need about six inches of
wire to make each one of these so there you go. That's how you make the twisted wire ornament
hangers. I hope you guys enjoyed. Thanks so much for watching. Subscribe to watch more craft videos.
I have a couple more coming out before Christmas hopefully so there you go. Thanks again for
watching. We'll see you next time.
