Portable Bench Build [video 426][Gifted/Ad**]

Peter Millard
113 followers
39 Video ViewsยทDec 17, 2022
Hi there, hope you're well. In today's video we're taking a look at my mobile bench build.
Of course a mobile bench means different things to different people. If you're Ron Paul
then your idea of a mobile bench is an eight foot by four foot slab that's a foot thick.
You can hang a table saw off one end, that's great if you're building houses,
not so useful if you're working in a Victorian terrace like these.
Doc Brown's got a nice pork style bench, lightweight, double skin, made of plywood,
just a general flat surface and if that's all you need that's great but sometimes
you need something a little bit more sophisticated. Tim Wilmot's multi-function tool cart
was an interesting take on that. I actually bought plans for that. Never got around to making it
though because well to be honest I started doing a lot of fitted bedroom furniture and taking
everything off the cart to take it all up to the first floor where the bedrooms are. Lost a lot of
The same goes for the Festool equivalent as well so I guess what I'm getting at is
that we all need a different type of bench and sometimes something off the shelf just isn't
going to cut it which is why we make our own. Let me show you what I've built here.
So one of my pet hates is having to carry lots of little bits and pieces into a job with me so
I've specifically designed this to suit me so it's got everything on board. Let me show you
what I mean. We've got legs that just fold out and lock, got a shelf on board that just sits
between them, we've got a rail and a square built in and just like that you're pretty much in
business and good to go. I've got a really wobbly floor, it's not the legs, don't worry.
So this is the bench, it's really simple and we'll talk about the construction in a bit
more detail later on. In terms of size the bench is 1400 long, the frame is 500 deep and the top
is actually 600. I like having an overhang like this just because it makes it easier to clamp
stuff to. For example you might need a jig like this and it's just easier to clamp when you've
got a single thickness of material. You've got the little shelf down here that's only lightweight,
that's made specifically for things like the rail or the fence, we'll get to that later on.
And the whole thing is just pretty simple and straightforward. As with all my NFT tops we've
a sacrificial strip routed in here which we can remove easily and that's gone right over the dog
holes so that if you do put a dog in there it becomes a low profile dog. I'll show you that
later on. Again that's easily replaced and removable. I think what I'll do rather than
shout at you from afar, I'll pack this up bring it back in to the other side and we'll put it on
the bench where I can talk to you in a bit more comfort.
So one of the things I particularly like in a portable bench is just to be able to drop it
flat like this so the legs don't stick out from the frame at all and that means you can just put
it flat down on the ground on the deck if you need to and then it's handy for cutting longer
strips and things whatever you need to do. In either end there's a little sort of storage
cubby. How you use these is entirely up to you. I'm thinking they're useful for, you know,
regularly used bits and pieces. You always lose the tape measure so good to have a spare tape in
there. You can use them for your boxes of screws or fittings, whatever you've got that you need
for the particular task that you're doing at any time. Or maybe it's pencils, sharpies,
whatever you need. I've deliberately not put a grid of holes on these partly because it would
be a bit of a pain to line it up and partly because I don't want stuff to fall through.
It's quite nice to have a flat surface where if you do need a few loose small pieces you can
actually just drop them down. If you are in the habit of doing that rather than say using the box
it might be worth just routing a recess in here just to keep those little small parts that roll
away contained. At the other end I've got my BenchDogs hardware. We'll talk about the hardware
in a little minute. So all my dogs and all my MFT dogs and the square bits and pieces are in there
so I know they're the things I'll be using with this bench and I know it's all contained
in the same package. Let's talk about the construction for a minute. It's made in the
simplest of ways imaginable. The whole frame is made from a half a sheet of birch ply.
It is 1400 long and 500 deep. There's a cut list and set of plans available to Patreon
supporters for free and for a small charge through my Etsy if anybody's interested. Again it's very
simply made. I made this whole thing with pocket hole screws. This is my first ever pocket hole
project. I can't fault the strength or ease of pocket holes and you know no problem at all.
So in terms of construction yeah very straightforward. It's a very simple little
thing. The legs are just laminated up out of 70 mil sections of birch ply
and they fold out on little metal brackets and the center shelf sits between them. The shelf
has got a 18 mil birch ply frame and it's just a piece of white hardboard that I had lying around
just to make it light and easy to use. If you think you're going to put heavier stuff on it
other than just rails or fences then maybe consider using something a bit cheap here
a six mil birch ply or something like that. And I've joined this together with the simplest
connectors I know certainly the easiest. These are relatively new
certainly to me. They're called a peanut fitting and we'll be looking at these in a bit more detail
later on in a future video. But they just simply slot in you route a keyhole slot
and the connectors just go in and as you bring them down they sort of tighten. Very very clever
British system and as I say we'll be looking at those in a bit more detail later on. So that's
that's the bench you know pretty sturdy with the legs on and as I say the legs are just connected
with these metal brackets that are available from Amazon and there are links of course
in the video description to everything that we're using today.
Just pop that down there.
So under the bench we've got a couple of little sort of cleats, little clips that I made from
birch ply. Again that's just simply to be able to slot the rail in there
and the square and the little catches on the hinges they lock in position and obviously
you'd have to release two of them at the same time. So what I've done is I've just put a piece
of wire between them and then you can release them both and they just fold in nice and easy.
Let's talk about the top. The top is the typical sort of MFT style grid of holes 96 mm
centres 20 mm holes and this is the one that I made in a recent video the MFT LR32 video.
It's 1200 wide and 600 deep I think I mentioned earlier and it's just fixed into the frame with
little screws that are counter bored so the head goes well down so it's very unlikely that you're
catch them if you do go off the sacrificial strip while you're cutting and at the bottom of each
hole of each counter bore there's a tiny little metal washer to stop the screws pulling through
as well. I mentioned in the when I made the MFT top there are lots of ways of getting hold of one
and making your own only really makes sense if like in this case perhaps you've got an oddball
size and not everybody has the means or the patience to make one of these and I'm happy to
say that I've teamed up with the guys at Formatic CNC to produce one of these. Now a custom MFT
style top in a different size you'd think would be a special price. In fact Make It Formatic
CNC is going to knock these out at the same price that he does his regular MFT top so starting from
for a 1200 by 600 one of these with the option to route a sacrificial strip
in there for you as well. That's a pretty good price as always links in the video description
down below. He's also given the option of a 1400 long as well so if you did want to have
the row of holes extending all the way to the end you could buy a 1400 one and then just cut
the two ends down where you want them or just not bother you know if you don't want to bother with
the little cubbies little storage bins either end then you don't have to use those at all but
those two options are available. A 1400 by 600 or a 1200 by 600 as I say link in the video description
and a 5% discount if you use the offer code 10minuteworkshop when you go shopping there.
Make It Formatic CNC are a good crew and they make really nice MFT tops so
well worth ยฃ40 of your time I think unless you are adamant that you can actually make one.
Now that's your basic sort of portable bench you could use that just as it is if you've got
a rail square in particular yeah that's going to work great you can do easy square cross cuts all
the rest of it but when I took a look at the Bench Dogs rail square it was then that I realised
that that was what I wanted to use as the basis for the hardware for this whole thing because
the game changer as far as Bench Dogs goes is that they do a pair of MFT dogs. Now these are
dogs that screw into the underside of the square and I've got collars on these as well
so with the MFT dogs in the square
that just sluts in there virtually guarantees that you're not going to chew up the bench
because it's right on the cut line and if you need to you've got extra dogs to give extra support
along your workpiece. The sacrificial strip is offset slightly so whether you're doing a
straight cut or a bevel you're not going to chew the bench up and it's this sort of hardware that
really makes the difference because quite simply when you finish with your cross cutting if you
need to slide the square back down to the other end of the rail and you've got your square and
your rail back you can take that off somewhere else or somebody else can and do cross cuts to
wherever the workpiece is if you don't want to bring the workpiece to here. Now that in itself
thing I mentioned when I did the MFT or rail square video, the disadvantage of this is that
you don't get access to things like flag stops for repeat cuts. Well fortunately
with the fence you can do the same thing with the rail dogs, the MFT dogs I should say.
The fence just drops in on our fence dogs nice and square and that goes down and then you get your
workpiece under there and you can make repeat cuts all day long
with your flag stop and at the end of the day when you're all done
that comes off, the fence comes off, MFT dogs have a place in there
the rail can drop back in there and even the fence
has somewhere to be stored
I've got the shelf in, never mind. And that's it really, that's your bench in a completely
contained package with a cross cut solution and a fence. The fence is generally pretty solid in there
but if you are going to have your bench rattling around in the back of your van for a while
I'd put an M8 knob on the bottom of the fence dog like that. But that's kind of it. Now it
has come in a little bit heavier than I would have liked. I was aiming for 25 kilos and it's about 28
slightly more than a quarter sheet of MDF is going to weigh about 12 kilos and
a half a sheet of birch ply is going to be about 15 so you can see where
why it's come in around 28. And obviously the more stuff you put in there the more stuff you
want to store in it the heavier it's going to get. 28 kilos isn't bad it's certainly lighter than the
Triton mobile bench thing and the Festool one as well and if you are in the habit of parking or
in a situation where you need to park you know a decent way from the job site then maybe a little
set of wheels or a dolly is a good idea. If you're in the habit of doing that you've probably got
those already to be honest so I think I'm quite happy with the bench. I may well put two handles
on it just to make it a little bit easier to manoeuvre if you were lugging that upstairs for
example. But other than that I'm very happy with the way it's turned out. It's been a long time
coming and it feels like this has gone by very quickly maybe it's dragged horribly for you
but there's been an awful lot of thought gone into this and lots many many prototype builds.
If you're a Patreon supporter you'll know all about prototype builds so thank you very much
to all of my Patreon supporters and of course my YouTube members as well. There's an easy way to
support the channel of course either through Patreon come and join the Patreon party at
patreon.com forward slash 10-minute workshop or indeed here on YouTube memberships which I've
added recently. But I think I'll leave it there for this build. It's been, as I say, it's been a
long time coming. I'm glad it's done. I'm very pleased with how it's turned out and I hope it
sort of scratches an itch for you guys too. Let me just do a quick round of thank yous. I want to
thank Ralf at Bench Dogs for the hardware. Definitely get the offer code 10minuteworkshop
at checkout for a 5% discount on all the Bench Dogs hardware, not just the packages that we've
put together here. And also MakeupformaticsCNC for doing the MFT tops. These are custom tops
and he's knocking them out from 40 quid which is a very good very very good price for a custom
MFT top. And again don't forget the offer code 10minuteworkshop at checkout there for a further
5% discount. That's kind of where we are with this. I'll leave it there. That's it for this
week. Thank you as always for watching. Stay safe, take care and I'll see you next time.
