¿Alguna vez pensaste que se podía crear un videojuego sólo utilizando cartón y algunas herramientas caseras más? En este vídeo tutorial te enseñaré paso a paso como hacer tu propia videoconsola con el juego que tu quieras... Todo hecho con papel :O Sonic la pelicula, sonic the movie
carton, hecho en casa, casero, diy, manualidad, para niños, for childrens, sonic, mario, pikachu, fortnite, facil, nivel, fortnite, nueva temporada, mario bros, sonic, rayman, plataforma, rings, consola, play, juegos, videojuegos, fortnite 2, fortnite temporada 10 11, sonic la pelicula, sonic the movie, sonic 2019
Welcome to the Canal de Arte Master!
Today we're going to see how to make a video game made totally of cardboard.
I know it seems crazy and totally impossible,
But I'll see what I can do.
Let's get on with it!
Well, the first thing we're gonna be doing is the game scenario where Sonic will be playing.
To do that, I cut a piece of leaf 50 cm wide by 9 cm vertical.
Although the width of the leaf, in this case, you could make it quite wider,
It all depends on how long you want the video game to last.
Well, as you see, what I did was draw a rather improvised Sonic scenario
With some obstacles and rings that we'll have to pick up along the way.
What is the video game screen, in fact, you can make it to your liking completely.
To color the scene, I used markers with a base of alcohol.
Although you could use acrylics, crayons or whatever you have at home.
Great, because once we have the scenario complete,
Now we'll have to spend time cutting the cardboard pieces.
The first piece we cut with a cutter will be 18cm vertical by 14cm wide.
I'll leave all the measurements on the screen so you don't miss a detail.
Next we'll need another piece 3.5 cm vertical by 12 inches wide.
We'll also need to create a kind of pole,
So we'll use caps, one smaller and one wider to create it in a simple way.
Then, with some scissors and making sure they stay as round as possible,
We'll cut them up and leave them for later use.
As the last piece to begin,
We'll also cut a piece 3.5cm vertical by 6cm wide.
Now, yes, after having cut out every single one of the pieces that we just indicated,
We should stay like this.
Well, to start with the manual we'll need two pencils that we don't use.
We'll cut off their heads.
What we're going to do next is impregnate a little silicone melted into the middle of the pencils
And paste the far left and right of the stage of the game in the middle of the pencil
So that I can enroll him.
We'll do it the following way by enrolling him in the final part.
Well, now what we're gonna do is take the piece that we already have ready for 12 cm.
And divide it into four cachos which you will now see what they serve.
These four pieces will also have a hole with a pencil on the top of each.
What we'll do then is fit these four pieces into the ends of the pencils.
to be able to hold the screen.
With a pencil we will mark the areas where we have to paste each of the pieces
And then with a little molten silicone we'll stick them very carefully.
The part where we made the hole in each piece has to stay on top, not below.
After we let it dry, we try the pencil on the left.
We'll see if you start to slide and this one starts to molar up pretty good.
Now what we're gonna do is continue with the pole and for that we're gonna need the three circles.
We'll stick all three with molten silicone but the smallest of all will go in the middle,
Like it was a sandwich.
Then when it's dry, right in the middle of this pole we'll make a hole.
Remember that we still have this six-centimeter piece, which we will divide in half.
These two pieces again we'll make a hole in the top.
We're going to take the pole again, with a stick in the middle.
And we'll also join these two pieces together to finish making a structure.
We'll also cut the rest of the stick.
Now what we're gonna do is stick very carefully this pole on the bottom of the screen.
After that we'll have our pole list and you'll see it can turn without any kind of problem.
To make sure the pulley is robust we'll also stick the end of the sticks.
At this point we'll have to cut a new piece 3 by 3.5 centimeters.
We'll also cut a small hole in one of the parts to insert a stick.
This will be the other part of the pole mechanism to make it work.
We'll flip the video game and stick this piece in the other end.
Now what we're gonna need is a little bit of transparent wire.
We'll cut a little and run the thread down the bottom until we turn over making a perfect pole.
We'll have to make a knot and cut it so that this thread stays quite tense.
But that's right, just make sure you don't break the pieces.
Then with a stopper or something similar we'll make a hole in the bottom so we can insert it into the left pencil.
Then we'll have to fix it well with a lot of molten silicone because this will be what will cause the screen to move.
We can also stick a little tapa on it to make it look more aesthetic.
Now it's time to pick up our protagonist who in this case will be Sonic.
I printed it very small, cut it, and put a piece of cardboard on it to make it stronger.
And then with a little molten silicone, you paste it tightly on the thread right where the knot was.
Right now we could start playing and test a little bit the mechanism and how it works.
Here's an example.
Well, we've seen it work properly but now to give it a more aesthetic look we're going to cut some more pieces.
Once again I'm going to leave the measurements on the screen.
At this moment the manuality is already complete so all we have to do is cover everything with this cover that we just cut.
This is what our video game made of Sonic cardboard would look like.
And now before I go I'm gonna play a little game with you guys to see how that works.
Could this be considered the first gameplay of the channel?
I hope you enjoyed this cardboard video game.
And if it's been that way, subscribe and activate the bell so you don't miss any video like this.
Before you go I would appreciate your thumbs up and your comment and without much more to say we'll see you in the next video.
Subscribe to the channel!