Stained Shou Sugi Ban Yakisugi Tutorial How to Burn Wood with Color

Jonny Builds
96 followers
25 Video Views·Dec 12, 2022
Welcome back to Johnny Builds where this week I'm going to show you how to do stained shoshu
gibbon like I did on my Kitchen Island build.
Shoshu gibbon is a Japanese technique of preserving wood by burning it.
There are several different styles and looks that can be achieved with this method and
it's actually easier than you might think.
So let's go do it.
And to get started you'll need a propane torch.
These are the type that are commonly used to burn weeds.
I'll leave a link down in the description below of a torch similar to the one that I
used.
It's important when selecting your lumber to stay away from boards like this with a
long open grain and look for boards like this one that have a tighter grain and where you
can see more of the cross section of the tree ring.
First I'm going to show you these two boards with the straighter grain.
Okay and now we'll hit the two boards with the tighter grain.
Okay as you can see I didn't char it very much.
But I did it more just to kind of show off the difference in the grain.
And this one reacted a little bit differently than the other one did.
That brings up a really good point.
It's important to test out a couple pieces because the first two I did I think they were
a little drier and they charred very quickly as you saw.
And these took a couple passes so you want to work with some test pieces.
But already you can see the difference in the grain pattern and how in my opinion this
looks way better.
Okay now we're going to step it up a little bit and do a little bit deeper of a char to
see the difference.
Okay and for this last one I'm going to show you what it looks like to do the full alligator
skin char.
Now once you're done burning the wood and you've allowed it a little bit of time to
cool off, we're going to come back in with a wire brush.
This is just the same brush that I would use if I was welding.
And we're going to give the surface a light brush.
You don't want to brush too hard because you don't want to muck up the wood.
But this is just to kind of break up the loose soot and ash that's going to be on the surface.
Now if we were to do a heavier char like this one, we'd brush it a little bit more and you
can see how that brings out the wood grain.
But for the purpose of the stain shoshugi ban, you just need a light brush just to break
up any bit of loose ash or soot.
You're just kind of cleaning the surface, getting it ready for the stain.
The next thing I like to do is come back in with a couple paper towels and just give it
a good wipe down.
You can see how much extra soot that's going to take off.
Okay now we're going to try the three different colored stains that I have.
The red, the green, and the turquoise.
These are all three stains that I got at Home Depot that they mixed up for me there in the store.
And then I also have this gray wood finish, Minwax wood finish.
I'm going to give the board one last wipe down.
Now if you're doing a large area, like when I was doing the Kitchen Island, I had that
whole tabletop to work with.
It was about two foot by four foot.
And I didn't try to tackle too much at once.
I did it plank by plank because you want to be able to put the stain on and then quickly
rub it back so it doesn't set too heavy.
You'll just brush it on, get a good even coat, penetration down into the woodgrain, and then
immediately come back with a clean cloth and rub it off.
And there you go.
It's that simple.
If you want it darker than that, you can leave the stain on there a little bit longer.
But I like the contrast of getting the color plus the charred wood and then the natural
wood that's left behind.
Try the red next.
Same thing, give it a good brushing, make sure it gets all down into the grain.
It does not have to be perfect.
Once you've got it on there, you can let it set for a second and then come back and rub
it off.
Okay, now we've given all the stains a little bit of time to dry, and I'm going to come
back with a sanding pad and some 220 grit sandpaper.
You don't want to use too aggressive of a grit because you don't want to take off too
much of the stain or too much of the char.
And basically what I'm going for here is just to bring out some more of that natural wood
color where it didn't char.
I want to bring that back out.
So I've got basically three levels of color going on here.
On this one, it would be the gray or the silver, the charred, and then I'm going to pull out
that natural wood grain.
And you're just going to hit it just in the spots where you want to pull it back out with
some light sanding.
It doesn't take much to give it some contrast and pull that color right back out.
And then we'll come back with a paper towel and wipe off the excess.
I'm going to find the spots like this right here where I want to pull out that natural
grain and right in here.
And I'm just going to focus on those spots.
And then for the finish, we're going to come back in and hit it with a Minwax Wipe-On Poly.
Now there are other kind of finishes out there, but this is the one that I've tested that
I think looks the best and it's the easiest.
I tried shellac.
I tried polycrylic.
I tried Danish oil.
I think the Minwax Wipe-On Poly looks the best, personally.
Put a little on a rag, just wipe it on.
And watch all those different colors and layers of the stained shoshugi bun just come right
out of that.
Okay everybody, that's it for this one.
Let me know what you think down in the comments below and if you haven't already, go watch
the Kitchen Island video.
I'll leave a link to it right over there in the corner and down in the description below.
I really, really enjoy using this technique.
It's a lot easier than you might think.
I love how you can get different looks all the way from the alligator skin to the stained
shoshugi bun that we did today.
So I can't wait to see what projects you guys come up with.
Make sure if you do a project with shoshugi bun, tag me on Instagram.
I want to see them, at Johnny Builds.
And thanks for checking this one out and we'll see you back here next time.
