Impossible Origami Folding Door

Jonny Builds
96 followers
36 Video Views·Dec 12, 2022
So I was searching around on the internet for some cool stuff
and project inspiration when I came across this crazy folding door.
I tracked down Warwick Turvey, he's the one that built this door,
and I asked him for permission to build a version for myself.
Hey Warwick, it's Johnny and man, I absolutely love your door
and I would love to build a version for myself. What do you say?
Hey Johnny, thanks for getting in contact with me.
Mate, I'd be really keen to see you build one of these doors for your shed at home.
I was super excited and I knew this door would be perfect for my shop,
but first I had some rearranging and some framing to do to make it all work.
And real quick, I want to show you all this 3D model of the door
and throw up a shot of all the dimensions in case you want to screen grab those for yourself.
All right, all my pieces are cut, all the miters are ground in,
and now it's time to start welding these frames together.
Precision is going to be the name of the game on this build.
So making sure that all those angles are nice and square,
making sure that the top frame and the bottom frame match exactly.
And the way I'm going to do that is I'll assemble the bottom frame first,
tack weld it all together, and then use that as a template
to assemble the second frame right on top of the first one.
And then once I have it all together, I can come back and run full beads.
Real quickly, before I move on to the next steps,
I wanted to stop and explain what I'm using as the hinges on this project
and what is going to be the center pivot point.
So for hinges, I'm using these. These are called pillow block bearings.
I'll use two of them and this three quarter inch shaft, which will slot through.
This will get attached to the frame inside the doorway,
and the door is going to pivot on these, basically what's a makeshift hinge.
Now in the center, it's very important that everything pivots perfectly around that center
point, and for that I'm using these super heavy duty bushings, also three quarter inches.
I'll use this same piece of steel rod that'll slot in there like that,
and that center will pivot around this giant bushing.
So I have to install this by laying out exactly where it's going to go
in between the two center triangles and then cutting around that
and then welding this piece in place to one of the triangles.
And then there's a plate that's going to go over that will attach to the other triangle
and everything will pivot around that.
Using that 3D model from SketchUp, I created SVG files of the door panels
and imported those into Inventables free software, Easel.
All of those panels are then carved out of quarter inch Baltic birch plywood.
All right, I've got all the panels cut out and now it's time to apply a stain.
I went back and forth for a while as to what the colors I was going to use on this door,
and what I decided is I'm going to go with an all black theme.
I figured the easiest thing to do was use this.
This is called Indie Ink. It's super cheap.
I'll leave a link for this down in the description.
Like I said, I've got to apply the stain to all of these, let that dry,
and then I can come back and do the epoxy pours
in those voids that the light will be able to diffuse through.
So
all right, it's time for some epoxy pours in these panels.
And the reason I'm doing this is to completely close off the door,
but then to allow light to diffuse through it.
So to do that, I'm using Total Boats 2-to-1 Epoxy.
This is kind of my go-to.
And I'm going to pour it in these little voids that I cut out over on my X-Carve.
Now, the reason why it's all taped up and clamped down in this fashion
is because this quarter inch plywood, it's got a bit of a curve to it.
So if I don't clamp it down, chances are the epoxy is going to go everywhere.
There's still a possibility that might happen.
I really hope it doesn't.
I think I've taken all the precautions here.
So I'm going to mix up some epoxy, add just a touch of white pigment to diffuse it,
and then start pouring it in these voids.
Okay, so it's time to get this door hung in the doorframe.
And as you see, I've already got a speed square clamped up
to keep my hinge hardware nice and straight.
I showed you before, but I'm using these pillow block hinges
and this three quarter inch steel shaft as my makeshift hinge.
And then I'll mount it with some four inch, if I can get this thing back on,
I'll mount it with some four inch lag bolts into the studs.
There's actually two studs back to back right here.
And that should be strong enough to hold this door
that I'm guessing weighs somewhere in the neighborhood of 70 pounds.
Pretty, pretty stout door, but this should be strong enough to hold it.
And that should work in theory, in theory.
Hey, thanks for watching and make sure to subscribe and turn on all notifications
to see what crazy thing I'm going to make next.
Also, thanks to Inventables and TotalBoat for sponsoring this video.
Inventables 3D software easel is a free download
and I've got a 15% off coupon for TotalBoat down below.
Also a big shout out to all my Patreon supporters
and there's info down below if you're curious about joining yourself.
All right, thanks for watching and I'll see you back here next time.
