96. Weighing / Mixing a Black Glaze Recipe with Hsin-Chuen Lin

Soul of Siberia
114 followers
3 Video Views·Dec 10, 2022
To see or buy my finished work, please visit my ETSY shop:
http://www.etsy.com/shop/hsinchuen
Please visit my Web site at:
www.mypots.net
Today I'm going to show you how to mix the glaze.
In my previous video, I told you that the glaze is made out of mineral chemical powder.
It's added to the water.
I'm going to show you how I mix one of my glaze.
Before I started, I had to wear a mask.
This is a heavy-duty mask when I'm mixing the glaze.
Let me show you.
I have a bucket of water here.
I need to add some water to it.
I will go ahead and add some water to the bucket.
Today I'm going to mix about 10,000 grams of the glaze.
It's called matte black.
It's going to turn black.
Before I do that, I have to dump the glaze into my storage.
It's empty.
That's all the storage chemicals that we have.
We have a very nice mixing table here.
We put all different chemicals in here so it's easy to reach.
Now I'm wearing my mask before I do it.
This is my recipe.
We usually print out a recipe like this with different grams.
Like 10,000, 25,000, 15,000, or 12,000 grams.
Today I'm going to mix about 10,000 grams of matte black.
This is my list of all the chemicals that I need.
It is castor, white tin, dynamite, EPK, cobalt carbonate, and red iron oxide.
Also here is a very nice digital scale that is very good for measuring.
It's very accurate.
The first one is the castor feldspar.
That's the powder I just dumped into this storage.
I'm going to use it because I'm going to wear my mask so I won't be able to talk.
I weighed about 5,730 grams of castor.
Let me bring my camera closer.
So you will be able to see the digit.
Now I'm ready to dump it in this bucket here.
This is the second ingredient.
320 grams of white tin.
3,000 grams of EPK.
340 grams of cobalt carbonate.
And 400 grams of red iron oxide.
So I'm done with my weighing of all the chemicals.
So there's a tip here.
When I'm measuring the white powder, I'm using this white container.
And when I'm weighing the colorant, cobalt carbonate, red iron oxide, I'm using this one so that they don't mess up.
And also after I'm done with the measuring, I usually have a check mark.
A check mark so that I don't mess up.
Because sometimes if you're in the middle of something or someone interrupts you, you might forget.
So after I weigh it and put it in, I use a pen or pencil to check mark it so that I don't miss anything.
That's very good. That's very important.
You don't add extra ingredient or you're missing any ingredient.
Okay, now I'm ready to mix.
Use the blender.
Not blender. The beater.
So I'm done with the mixing with the water.
But before we could use it, we still need to screen it.
So that all the chunks or all the larger particles will filter out.
So I will show you how I screen it.
So this is our matte black bucket here.
We already have some of them but the level is low so I have to add a little bit more matte black glaze in this bucket.
This is the screen that we use to filter the big chunk or some kind of large particle.
So that the glaze is even.
Actually this is pretty good.
I don't have many big particles so this is very good and easy to use.
And I use about 60 mesh so all the powders can go through easily.
I think 60 should be fine enough for glazing even if you want to spray your glaze.
And then I'm going to stir a little bit to check the whole glaze is at the right thickness.
Actually the glaze is a bit too thick so I have to add a little bit of water.
This looks better.
I usually tell my students before they dip their pieces in the glaze, always check that the glaze is at the right thickness stage.
How do you check it?
Usually this is the method I tell my students.
Use your dry fingers and dip it in the glaze.
If the glaze is still showing your texture but it's not very easy to see the texture, that's the right thickness of the glaze.
For experienced potters, they can just use their eyes to check it and they will be able to see if that's the right thickness of the glaze.
But if you are a beginner, use a dry fingertip to dip it in the water after you stir it.
Dip it in the glaze and see if the glaze is showing.
Still you can see a little bit of your texture but you don't see too much of your finger.
Like this part, now it's a little bit too thin because I shake it up.
But if you dip it in and it still covers your texture and shows a little bit of the higher part of your texture, that's the right thickness.
So this glaze mixing is done.
This bucket of matte black glaze is ready to go.
So this is all the glazes at the studio of Sunnyvale Community Center.
This is where I work, I teach and also I work as a kiln technician, mixing all the chemicals and firing all the students' work.
We have about 17 buckets of different glazes and all the glaze samples up there on the wall to show the people.
We do both high fire oxidation and reduction.
Most people do only one kind of firing but we do both oxidation and reduction.
We fire to cone 10, maybe 10.5, sometimes even harder than cone 11.
Okay, thanks for watching.
