6 DOLLAR TREE DIYS FOR YOUR FALL HOME DECOR

New Cottage
211 followers
20 Video Views·Dec 10, 2022
Hey everyone! Welcome back to White Sparrow Living, Loop 12 6. I'm Wendy and I'm so happy you're here.
For this project I'm using a whole pumpkin patch full of pumpkins. I've got three of the styrofoam
large ones, three of the gingham ones, two of the burlap covered ones, and then three that have the
flowers on the top. I have one a little bit taller than the other two because I want two of them to
be the same. You can see here I found these adorable little tin pots and they were already
these colors so teal pink and like an off-white. They're so pretty and they come in different
sizes. So the first thing we're going to do is get all of our pumpkins ready. So I'll take the
fabric and the stems off of the styrofoam gingham one and then take the burlap off of the other one.
I really should have gotten the brown one because the orange shows through those cracks but we'll
address that later. So what you end up with is a large one and then getting smaller and smaller
because we're obviously making a topiary. So I'm going to get them all ready to paint and I'm
sticking them on a wire skewer. I think this was from a sign from the Dollar Tree that I took the
plate off of or something but just something so that I can shish kabob it and then make it a lot
easier to paint them. So I'm going to paint all of them in my waverly chalk paint in white and I'm
doing the bottoms and the tops and you can see here this orange one that was covered in the burlap
why it was so hard and why I recommend getting the brown. It has the orange that's sticking
through and I couldn't get my paint all the way in there so I'm going to cover that up in a minute.
So now I'm taking some chalk paint in ballet slipper and adding a whole bunch of white
and making it a super soft peach blushy color to match my tin and then I'll do the same thing with
my teal one and this was a little bit harder to get the exact teal so I just took my pool and some
acrylic paint in the teal and added those together and then added a little bit of green to make it
that teal and I'm just brushing it on all of my pumpkins very lightly and then I'll go over it if
I'm a little too heavy-handed with the color with another layer of the white so it tones it down a
bit and then for my off-white tin I just did the same effect using my chalk paint in plaster. So I
just took some of the nylon white rope from the Dollar Tree and I'm going to cover those big
wide cracks up that are on that orange burlap covered pumpkin and you do have to cut them apart
so that your dowel will eventually go through the middle. I cut those down and then glued them at
the beginning and the end and then just tuck those right into those little cracks. So then I took a
wooden clothes pin and I'm going to paint that black using my ink chalk paint and those are
going to be our stems and I did these in black so that I would have something that matched with the
black writing on our tins. Then I took some foam board and I just cut circles to get a little bit
lower into my pots so I traced around the lip and then cut a little bit inside and then I took a big
long barbecue skewer which is eventually what we're going to be using, made a hole in the middle
and then put some rocks at the bottom so that I could make that nice and sturdy and it wouldn't
be top heavy. You could also add some floral foam at this point because your dowel will go
straight into it. The rocks do hold it together but if you move it around it does move. With the
foam it would just stick right in there and wouldn't move at all. And then I just used my hot
glue to keep my foam board in place. So now I'm going to take some spanish moss and use some hot
glue and cover up my foam board and then take my dowel and stick it right into the middle and kind
of shake those rocks around so that you can feel that it's at the bottom of my tin and then I'm
going to start placing my pumpkins going from the largest one to the smallest one and glue those down
onto each other making sure that they're snug as a bug in a rug. Then I took some baby's breath from
the dollar tree and I'm just going to tuck those in all the way around right under my pumpkins and
into that spanish moss and you could glue these in but they stay pretty tangled up in that moss so
they're not really going anywhere but if you want more security go ahead and add some hot glue.
So there's a lot of dowel left over from these barbecue skewers so I'm just going to cut that
down and then send that extra back down so you'll have two dowels going into your pumpkins and that's
what makes it so secure. And then I'm going to take my clothes pin and pop that on top this is
the old-fashioned kind so there's a slit there and it'll go right over those two dowels. Now we're
going to make a sweet little bow and I'm using some polka dotted grosgrain ribbon some white
and then a little bit of lace and I'm just going to fold that over in thirds use a chenille stem
to attach it in the middle and then twist that so it stays in place and then poof out my loops but
I want to give a whole cascade of my ribbon so I'm going to let the tails be super long and I'll just
attach that to my stem with the excess chenille stem. I took my top pumpkin off so that you guys
could get a good view because it's really tall once you put these all together. So I have these
really pretty teal roses from the Dollar Tree but they were a little bit too big for what I wanted
at the top so one thing you can do with any of your florals is to cut those down and just kind
of do a little up and down jiggity jaggedy line and make it into a smaller rose or you could cut
the outside petals off to make it a little bit smaller so I'm just going to attach those here
and there add some baby's breath and then do that all the way down the side of my pumpkins and then
as I'm going down the side I want to attach my ribbons and gather them in certain places so that
they can tuck in between the pumpkins so I'm just going to take a scrap piece of chenille stem and
attach those and then spread them out so it looks nice and pretty. And here they are all finished
and I am just tickled pink and teal and white with how they turned out. I absolutely love them as a
trio but I don't have any rooms with this color scheme so my niece Karis though saw the teal one
and she politely reminded me that her bedroom is this exact color so I sent that one with her
and then the pink one that went home with my granddaughter Cadence who has a pink room and then
the off-white one well that one is staying with me. I love them and I hope you like them too.
For this project we're doing a smaller and much more manageable size topiary so I'm using these
cloches from the dollar tree and I want to have two different heights so I am going to use a candle
holder it's got a little pointy thing at the bottom of the cloche so I turn my candle holder over
because that's going to go inside there and the base will fit right on top of the candle holder
but then I got the bright idea to add lights so because there was a hole already in the bottom
of the cloche I thought this would be an easy thing. I do have to change my candle holder a
little bit but I'll show you that in a second. So I'm going to feed my lights up through that
little hole and then cover the base with some Spanish moss using some hot glue and then I just
cut off the edges so that it didn't poke out of the top part and then I'm going to take my little
teeny weeny pumpkins and I'm just stacking three on top of each other. I'm leaving them with the
cover that they already had and the color that they already had and then just taking them and
popping it onto each of the other one's stems if that makes sense. For the top one I'm going to
take that stem off and replace it with a little piece of branch from my tree outside and then I
took some paddle wire and just made curlicues by wrapping it around a screwdriver and then I'll
put those right around that stem and then pull those out glue my stem in and then I didn't have
any small tiny teeny little leaves so I just cut some down from a scrap piece of leaf I think this
was a dusty miller from walmart and then just glued and poked that over on top of the others
and then I'm going to take my lights and just wrap those around. Now if you've seen the different
types of cloches where they have these kinds of wired lights they kind of go all over the place
and mishy-mashy you know just ziggy-zaggy everywhere kind of a messy look which I do like
but I'm going to do a different kind on the next one. Anyway do it however you like. So now I'm
going to take my fall rub-on designs and put a couple of those on the front of my cloches
and then because I do have the lights now I had to put some jenga pieces on top of that bottom
part of the candle holder so that the little cord would feed through it because it's lifted a little
bit. So for the bottom one the one that's just going to sit flat on the counter or whatever table
whatever I'm going to do the exact same thing but I need a spot for that cord to go through
at the base of the cloche so I'm going to take my hot glue gun and just heat that up. It didn't go
all the way through either that or I just wasn't patient enough so I took my cutters and made that
a little bit of a hole and then it fit fed through but this time I'm wrapping the lights around all
of my pumpkins just kind of more in an organized fashion. It's still you know messy and cute
but it's not as free form as the other way so do it whichever way you like
and you know when you put the cloches on top of the base there's a little bit of Spanish moss that
will be peeking through a little bit and that's what keeps it on there and it doesn't come off
it makes it nice and tight. So here it is all finished and I really think these are so cute
they took no time at all but they're still adorable perfect for any shelf or if you're doing
a tray and you've got the different heights with your fall message. I love how these turned out and
I hope you like them too. For this project I'm using two styrofoam pumpkins and a pair of black
and white striped socks so FYI the black pumpkins are a little bit larger than the white ones and
so my socks were popping off left and right no pun intended because they were not fitting onto
the black ones so you definitely have to use the white ones for this. So all I did was I put my
socks over onto my pumpkins and then at the bottom I'm going to tuck that in with a pair of scissors
just right through that styrofoam. I had an old pair of pants that the zipper broke on in the
houndstooth pattern so I thought these would be perfect I just stuck one of the pumpkins into the
leg and then did the same thing pulled off the stem made a hole and then tucked that into itself
because it's hollow inside and so this took about five minutes to get these covered and I have never
been able to find those tree branch pieces from the dollar tree so I had to make my own and I'm
using a piece of a stem that was left over. I'm going to take a brown paper bag and wrap that
around that stem so that I can move it and bend it to the shape that I want. I glued up the little
ends that were coming away from the twisting part that I did and then just get that all shaped to the
way that I want it and then using my folk art metallic pure gold paint I'm going to paint my
stems and then I decided I wanted to put some leaves on here too so I'm going to take some
leaves from the dollar tree and paint those with my gold paint as well. So I just poked my stem
into the top of my pumpkin and then hot glued my leaves to that and if you want a simple pumpkin
you could just leave it like this. I think it's really pretty but then I'm going to take some of
this pit berry vine and roll that up to make some tendrils for our pumpkin and this is the white
like pearly looking ones so I thought that was really pretty and then I'm going to wrap that
around the stem and then for our bow I wanted it a little glammy so I'm going to take some white
and some black that has gold on it and then fold that over about two or three times and then make
little slits in the middle wrap it with a chenille stem and then I'm going to take the ends and just
cut those apart dovetail the edges and then spread them all out and attach it to the top of my
pumpkin and then I just did the same thing with my striped pumpkins and then to ramp up the glam
factor just one more level I took these fashion gems and attached those to the side of my pumpkin
towards the top just in random spots and it's done and here they are all finished and I think
these are so pretty and elegant looking they almost have a Mackenzie Childs vibe to them I
don't know I love how they turned out and I hope you like them too. For this project I'm using a
Dollar Tree platter and some white chalk paint and I'm just giving this one coat so some of the
darkness will show through because I want to make this look really rustic and old so I'm using some
antique wax and just making a bunch of smudges and just kind of discoloring it or giving it a
patina that I don't know I don't even know what I'm doing but I will tell you I got my inspiration
from Pinterest and I went to I was looking at all the different paintings of pumpkins and things and
things for fall but I found the most awesome shop on Etsy it's called Haley B Designs and once I
went to her store I was just smitten with all of her artwork she's got beautiful painted tea towels
and prints and the little garden flags but I just love her style and the she's got a lot of Christian
art on there anyway my I'm not even going to show it to you because mine does not look anything like
hers but that was where I was getting my inspiration from I'm going to have her Etsy shop
linked in the description box below so I just really want you guys to see her work she is so
talented and so I just thought I'd plug her anyway so I'm just making some round pumpkins and I did
one in white and one in orange and just mixed my colors up you guys know I love to listen to my
worship music and it's very therapeutic even though I well I'm not going to say it but I'm
not a good painter but it is something that I do enjoy doing but this was just something that
just gives you a chance to relax and slow down and I'm not really having to think because I'm
not putting anything together or building anything this is just much easier and relaxing
and calming and we all need that in our spirit sometimes so anyway as you can see I'm just
roughing these up and trying to give it that Haley B design spin I think once you put the
I don't know how she did hers or what her style is she's just incredible but the way that I've
tried to recreate it was by making my lines a little bit darker and then once I get that
shading in then going over my white pumpkin with some more white paint and same thing with the
orange just making it kind of darker underneath and then adding the base color back on top of it
so that it lightens up those strokes if that makes sense but blending is always fun I don't think you
can really ever make a mistake but I just am doing this more for a way to slow down from the
chaos of life and with everything going on this was just a really good spiritual time and I was
able to kind of sit and visit with Jesus and be still and think on all of the blessings and the
that are going on right now and appreciate how blessed we truly are so then I took a little
wooden dollar tree cut out that says blessed and I painted that with a little bit of black and some
brown and then I used some super glue to attach that to the right side of my sign or my platter
and then I made a messy little bow and you guys have seen me make enough bows by now
that you probably don't want to see me make the whole thing but I'm just going to attach
that to the top of my platter and then I set this onto a plate stand from the dollar tree
and it was done and here's how it turned out and I think it's so pretty I love these colors
because they're nice and muted but it looks so rustic and I love that farmhouse look only the
platter and the little blessed sign and some ribbon and a plate stand so I love it and I hope
you like it too for this project okay I really wasn't even going to include this one because I
don't like how it turned out but I had some extra green mixture of color I accidentally
poured out too much so I painted this a while back and knew I was going to use it for something or I
could use it for something because I liked how I painted it but I ended up cutting this right
in half because there's a seam right there I wanted to do something with the flowers or
leaves or fall some things inside of it and then have the top of the pumpkin on top of all the
pretties inside so I found a little stem that I decided to use I had different options I had little
corks and then a stem from another one I decided on this little cork and used that as my stem
and then I put also some foam inside and covered that with excelsior that I had and I only had one
stem of these really pretty white colored or whitish leaves and that was the whole point that
I wanted to use these okay so the problem is I should not have cut it right in the middle but
that seam was right there and it was just screaming for it to be cut in half but I should have gone up
a little bit more so I think this would have still been pretty I mean it's okay but I'm just not
totally in love with it I could have stopped right here I added those leaves and then I
added some baby's breath but then I added because I got another bright idea I added some of those
really pretty vine lights that they have at Dollar Tree so I stuck those in there these are kind of
reading blue on camera but they're more of a whitish color anyway so then I wanted to put some
more green in there so I added these berries I don't think I should have really done that but
it did match and stuff and then I should have stopped there too I should have stopped a lot of
places and then I found this hello autumn sign again in that same pack where it came with the
blessed that we just used on the platter I attached that to a stem and then stuck that in there didn't
like it pulled that out I actually added so many things this thing took me forever and I still am
not completely happy with it but I think it all has to do with the fact that I cut it too low
and it shouldn't have been in half and I should have also gone back and painted the inside because
you can see a little of the styrofoam peeking out but anyway I semi love it and I hope you like it
too for this project I'm using two of these little church window signs and a frame that is a five by
seven pulled up the little signs that were on those windows and I might be able to use those later
and then I'm going to open up the back of my frame and pull everything out including the glass
so what I'm going to do is I'm going to attach these so that I have two windows on the outside
of my frames and to attach those I use temporary painter's tape on the front so that I could keep
it together and then I lifted it up with a couple of paint jars my handy dandy paint cans there and
then I used a piece of five eighths inch ribbon and then glued those to the inside of the opening
where they turn in because I want these at an angle so it looks like a window with
I don't know two side pieces so once I got those down I'm gonna take this entire thing outside
and paint it white now what I would recommend doing on this is to take everything out paint
them first and then put them together and I forgot why I mean I guess it's just easier but there is
another reason why so once I think of that I'll let you know but anyway I'm using my Krylon spray
paint in matte white and then I'm going to paint that entire thing okay here's why I wanted you
to paint them before you attach them I want these washers to be attached to the middle part of my
two side frames and I'm going to e6000 those down but because they're already attached together I
can't lay them down flat without messing everything up so if you paint them first and
attach your washers while they're still separated it'll be a lot easier to work with because here
I had to string them onto there so that it would give the e6000 a chance to adhere and then I had
to cut the strings off so then I went on to my silhouette suite and I designed some words that
says Jesus is the reason for every season literally so I just printed that out and then
cut it out using my glass as the template so I would know where to place it or where I wanted
it cut out and then I'm going to put everything right back into that frame close that all up
and then I'm going to make some little pretties to attach to our little washers so because this
is a fall video I'm going to start with a little pumpkin and I just used my craft knife and I'm
going to cut through the burlap and the styrofoam and then to make it a little bit cuter I just took
a teeny tiny little dowel and cut that down with my big fat cutters and then I'm going to attach
that using some hot glue to the back side of my pumpkin and on the burlap I had to glue that down
where I'd cut it away from each other so it would attach and not you know fray and go all over the
place I took some little black and white gingham ribbon from the dollar tree and I'm just going to
make a sweet little bow for each of my pumpkin sides or halves and then glue those to the top
and then I wanted the little tails to be kind of tucked up and look like they're flowing so I just
made a little dot and pushed the tail up into it so it has a little bumpity bump in the back or on
the bottom part anyway and then I'm going to take a magnet from the dollar tree these are super heavy
duty and I just glued that onto the back and then because we're talking about how jesus is the reason
for every season I just kind of went ham with all of the pieces that we could later attach for all
seasons we have the little hearts for valentine's day we have the dia de los muertos for all saints
day or all souls day and but you have to get things that are very light you know because it's just that
one magnet and then we have something I got these snowflakes for the winter season I found these
little crosses and I got the laser cut crosses it has the hole at the top of the wood cross so
instead of covering that up because I wanted to leave them the natural wood I put some super glue
on the back of my laser cut one and then just put it over that hole and then I mean you could do
anything with this the options are just unlimited I did want to put this little wreath on each of
them if there was no season going on at all and they were so pretty but I only had one anyway if
you celebrate palm sunday and the liturgical uh color for that for palm sunday is red so I
attached a little red bow on there I have some poinsettias you can tell the story about the
poinsettias and just cut the backs down add your magnet you can add it to anything and then you have
a sweet little all season display letting the world know that Jesus is the reason for every season
literally anyway I love how these turned out and I hope you guys like them too I hope you enjoyed
all of these projects don't forget to give this video a thumbs up comment let me know what you
think if you're not already I hope you'll consider hitting that subscribe button down below as well
as the little bell right next to it so that you can be notified every time I upload a brand new
video thank you for all of the prayers for my mom my uncle and everything from us and Michael J
I love you all so much have a blessed day and remember to always be the light bye
