Absolute Top 10 Best High-End Neutral Christmas Decor DIY Ideas on a Budget! Dollar Tree DIYs 2022

Holiday Decorations
97 followers
20 Video Views·Dec 10, 2022
Hello Crafty Family and welcome to another tutorial by Shiseo Crafty.
For today's DIY projects I am sharing my favorite neutral style Christmas DIYs
with innovative ideas to get those creative juices flowing.
Now all of the projects also have the supply list and information links in the
description box and you can take a snapshot to take
with you shopping. Now before we start I have to say hey hey
and don't forget make sure you click that subscribe button so you never
miss a new video. So now let's jump right into the projects today.
This project is a white swirl Christmas tree art piece.
Now we're going to need one of these tree toppers from the Dollar Tree,
some tumbling tower blocks from the Dollar Tree or a picture frame from the
Dollar Tree, and some black foam board from the
Dollar Tree. So I'm going to start with the Christmas tree topper
and I first want to break off that bottom piece that you hook to the tree
and then if you pull apart the pieces they should snap right apart and you'll
have two different star pieces. So now what you
do is you go in with your wire clippers and we are going to start separating the
little swirl pieces into the pieces we want for our design
and it's just little clips all along the way until you
separate each one of the pieces. Once you get one of the pieces
separated you just trim it down with your wire clippers until you have
your final piece that you want to work with. Now
this is what the piece will look like and we're going to cut each one of them
down and we're going to end up with a total of 10 of these pieces to
work with. And now what I'm going to do is I'm going to take it out and give it
a coat of white spray paint. Now you can definitely
use the silver as if you want to but I wanted my
tree design to be white. Now while that's drying we are going to take
our tumbling tower blocks and build our frame. So we're first going to lay out
five blocks and we're going to be gluing these all
together. Now what we'll end up doing is we're going to make two
five block sets and I'm just going to glue these together with
some wood glue, hot glue, or any kind of glue that you would like.
Since this is going to be adhered to foam board it doesn't matter which glue
you use because it will be reinforced in the end.
So once you get all five pieces glued together here is what it looks like
and just repeat it until you have two sets. Now the next set of blocks we'll be
putting together is a total of five blocks side by side.
Now we're going to glue these together the same way we did for our
five block sets as well and we're going to do
two seven block sets gluing these end to end
making sure you wipe away that glue as you go.
Now here is one of them and now just repeat them until you have a total of
two. So now all of our frame pieces are all
put together we can start assembling our frame.
So lay your five block piece down on your carpenter square
and then add a little bit of of that glue at the corner and you want to join
the corners as shown here. And then we're just going to flip it
around we want to add the other five block piece to the other side
sitting it right on top of that seven block piece with a little bit of glue
and when you apply it just hold it in place until it adheres
for about five to ten seconds. Now you want to flip the entire thing over and
then add that last seven block piece to close in your
frame by just adding glue on each one of
those open ends and then pressing that seven block piece right down to
close everything in for your completed frame.
Now you just want to let this sit for a few minutes until that glue
really solidifies and now we can paint the frame.
Now keeping with my black and white theme I am going to be painting this
with some white chalk paint. Now I chose chalk paint instead of
acrylic paint because it is thicker and it
tends to hide all of the creases of the blocks a lot better than
acrylic paint or spray paint but feel free to use any kind of paint that you
like. So I like to start painting my frames on
the inside and then go on the outside and then finally laying it flat to paint
the surface of the frame and I'm going to do
about two coats for this to make sure that it's nice and smooth
and allow it to dry. So now what we're going to do is take
that foam board and we are going to take our dried frame
and we're going to sit it right in the corner of that foam board. Now this will
be the backing of our frame so I'm going to trace out the frame with
a pencil and then when that's done I'm going to
grab my ruler and my utility or exacto knife and cut
out the shape that we just traced onto our
foam board. Now once we have our shape I am going to
trim an additional quarter inch off the long side and the short sides so
it won't overlap the edges of our frame. So now I'm just going to test the fit by
laying the foam board on the back of the frame
making sure it doesn't overlap and everything looks good to go.
So now we can start doing putting together our tree. So here are my spray
painted pieces from my tree topper and now I'm going to
start laying them out to build our frame. Our frame for our tree. So now what we're
going to do is we're going to lay two pieces at the bottom as shown here
end to end and we want to lay them down in a slant.
Now this needs to kind of emulate how tree branches would lay
so I'm going to be laying these two at a time side by side
applying hot glue to each one of the tips
and this is how the first layer should look. Now the next layer will be
right on top of that and the swirls will be slightly inward
and we're just going to go inward a little bit more for each additional
layer. Here it is at three layers and then the
final fourth layer will be added right on top.
Now that fourth layer does cross over quite a bit
so I'm just going to trim down the overlap just a little bit so it'll look
a little better in the final project. So once you have four layers of your
tree we can work on the topper. So we're going to take piece number nine
and we are going to sit it right on top. Now once you decide
where you would like it to sit again you're just going to add some hot glue
to the very top and the bottom and then place it
right on top of your tree. And then for that final tenth piece we
are going to figure out where we want to place that for the bottom of the tree. It
can be higher up or lower down. I chose the
lower down position so I'm just going to add hot glue and
press that into place as well until it adheres.
And here is what my tree turned out to look like
and then just go in with a brush and remove all of those hot glue
strings. Okay so now we can take our frame which is nice and dry. I'm going to
sit it on top to make sure it does fit okay and then we're going to flip it
over and make sure everything is level on both
sides. Now once you're happy with the placement
now you can go in with your hot glue and go around all the way the edge of the
back of the frame and then place your Christmas tree design
right on top. You want to carefully place this. You can
only place it once so make sure it's exactly where you want it to be.
And here is what the tree finally looks like when it's all framed.
Now if you like you can trim out with embellishments. You could put greenery on
the top. You can add greenery to the corner. You
can even add greenery along the bottom. But I just thought this piece was so
beautiful as is and I didn't want to add any
additional embellishments. And then to hang this piece I'm just
going to flip it over and I have a piece of jute string with knots tied on each
end and I'm just going to hot glue those
ends of those knots right on the back. Now that sticker did
kind of bother me a little bit so I did end up peeling
that off here getting it out of the way. And now just to cover up the ends of
those knots I'm just going to take a piece of craft paper, add some hot glue to
it and just lay it over the ends of those knots just for a nice
clean finish. And once that's adhered down you are
finished with this project. And oh my goodness you guys I just love
how this piece turned out. Now I thought that the tree topper was
so pretty and deconstructing it and coming up with this beautiful tree
design was such a perfect idea to share with you guys.
Now you can also add some lights by feeding it through the back
or greenery embellishments or keep it as
is in all its beauty. This project is a set of two toned holiday
vases. So we're going to need two of these small vases from
the Dollar Tree. Now what we're going to do first is take those vases we want to
make sure they're nice and clean and I'm going to give them two coats of
this satin bright white spray paint by Krylon and you can use chalk paint or
acrylic paint if you like. Now here the vase is all nice and dry so
now we're ready to paint them with the faux wood effect.
And in order to do this we will be using our antique wax.
Now the first thing we want to do is to take our painter's tape and we want to
put the painter's tape around near the bottom
edge of the vase and I guess I went up about an inch and three quarters.
And you want to go around each one of the vases with the tape.
And here are both vases taped off so now we're ready to paint.
So I'm going to take some of my acrylic or my antique wax and you want to make
sure you use a chip brush for this because the
bristles and the chip brush give it the perfect grain to look like wood.
So we're going to start applying that. Now you do want to start applying it
making sure you consistently go in one direction.
Now it will fling off so don't do like I did and keep your other vase
in the area. You see how it has little speckles on it?
No worries we'll be able to clean that off later. So you want to continue to go
around the bottom of the vase with the antique
wax until you achieve the wood grain look that you are happy
with. And here are those speckles and you just
take a wet wipe and that just wipes off.
And that's the thing about antique wax it's really forgiving it doesn't dry
really quick so you could just wipe that off and keep things
moving. So here is the result of the first vase.
So we're going to sit that down and we are going to do this for the second vase
as well. Here they are and let them completely
dry. Now once they're just about dry I'm going
to go ahead and remove that painter's tape from both of them
and you can see that it left a nice crisp line and
this is what they look like. Now to embellish these I'm just going to take a
piece of this black and white checkered ribbon
and I am going to tie a bow around the middle of each one of those vases
just to tie it in to the black and white neutral theme of these projects.
And it looks super cute and here is one of the vases just repeat this
for your second one. And now both vases
have their bows and now you have to add your
greenery of choice. So I'm using some of these pine sprigs with little teeny pine
cones on them. Now I got these in a huge bundle at
Family Dollar for three dollars and I just cut two of the sprigs off
and I'm going to place one in each one of my vases.
So simple but still so stylish I love how these look with the little pine
accents. And now you can place these on display
and enjoy them in your space. Now I really love the simplicity of these
vases and they blend in perfectly to our neutral
holiday theme. Now these can also be used year-round by just changing out the
greenery too. There's so many ways to decorate and
display these vases. Now no matter how you choose to decorate
with these they're definitely an easy and budget-friendly project with a
stylish look. Now this project is a wood holiday bulb
decor piece. Now we're going to need one of these
wood merry and bright signs and one wood bulb sign from the Dollar
Tree. So what we're going to do is we're
first going to start off with the bulb sign
cut off all of those tags and then we're going to grab our painter's tape.
Now I want to divide this into three sections so I'm putting a piece of
painter's tape near the top and one near the bottom so
I'll have a strip open in the middle as shown here.
Just wrap that tape around the back and now we're ready to stain.
Now I am going to be using my Waverly Antique Wax for this but you can
definitely use traditional stain for this if you like.
I'm just going to take my cloth and I am going to stain the top and the bottom
portions just rubbing that antique wax down into
the wood grain. Now once the top and the bottom are done
this is what they look like and you want to follow up with a paper towel
removing all of the excess wax. So once that's done now you can go ahead and
remove your painter's tape and then we're going to place it right back on
top of the wax side to outline the center portion which we
will be painting another color. Now once both sides are done we are
going to paint the middle with this acrylic black paint and you can use any
color that you like but I wanted black for this project
and we're just going to place one nice coat in that center panel
and once it's all painted you want to let it sit to completely dry.
Now while that is drying we're going to grab our merry and bright sign
and we're going to grab something that we can cut it on. So
we're going to remove the tags and what we want to do is remove the merry from
this. So I'm first going to go in with my
pencil and outline the letters where I will
detaching it from the rest of the sign and I won't be
including that swirl on the end of the M because it won't fit on my bulb but you
can definitely keep it on if you like. Now to detach it I'm just going to be
using some of these utility knives or you can use an exacto knife and all
you have to do is score the line two or three times and
then once you do that it should be able to where you can bend it back and forth
a few times and it'll snap right off. Now if you do
have any wood burrs you can go definitely trim that off with the knife
and you want to repeat this for the entire sign.
And then here it is all detached and ready to go. Now you can clean up all the
edges with your knife and you can also go in with a piece of sandpaper
and smooth all your cuts off. So now that that's done we can go ahead
and start to paint it. So I'm going to be using some white acrylic paint to
paint my merry word. You can definitely use spray paint or chalk paint.
I'm just going to use acrylic paint and put a couple of coats on here
making sure you get around all of those edges of the letters.
And here it is all painted and now allow it to completely dry.
So now all of our pieces are finally dry and we can start to assemble our
project. So go ahead and remove that painter's
tape from your bulb and everything it turned out really clean with that
and we're going to place merry right on top. So now you can see why I did cut
that swirl off because it would be overlapping the edge.
Now to apply the merry I'm just going to apply some hot glue
to the back of it and then place it and center it
right on the middle of that bulb. Now once it is applied I noticed there was a
huge gap at the bottom so I had one of these snowflakes
left over that I purchased from the Dollar Tree and through the magic of
camera we did paint that white as well and we're
going to go ahead and apply that right below the merry.
It does fit perfectly in that little open space so I'm just going to add some
hot glue to the back and then place it right
underneath the merry. Now I did have a hole in the snowflake
where you would hang it with a string but I'm going to disguise that by just
putting a dab of acrylic paint inside of that hole
to kind of blend it in so it's less noticeable.
Now to top this off I am going to be using some greenery so I have some pine
sprigs, I have some cedar sprigs and I wanted to give these a snow
effect so I'm going to go ahead and take my paintbrush
and lightly just dry brush on some of that white acrylic paint
to give it a snow dusted look on all of my greenery.
So here's all of my greenery ready to go. Now once it's dry we can start to apply
to the top of the bulb and I'm going to start by laying out two
of the pine sprigs and then two of the cedar sprigs
right on top. Now you can use any kind of greenery that you like for this. I'm
using what I had on hand and I wanted to stick with a neutral
green color nothing too sparkly or shiny or red so I wanted this to be really
neutral. So I'm just going to go ahead and grab
some of that greenery and apply to the pine sprigs on top first and
then I'm going to follow up by adding those cedar sprigs
right on top and hot gluing those. Now once all my greenery is in place I'm
just going to top everything off with this black and white ribbon
and I tied it into a little bow and I'm just going to hot glue that right in
the center and there you go. Now to hang this up I'm just going to
take some jute twine and you're just going to run it right back through that
hole and hang it up if you wish. And here is the completed sign on
display and it turned out so beautiful. I don't know about you but I
just think that the combination of the black and white with natural wood looks
so high-end and when it's combined with the
greenery it looks so festive for the holidays.
Now I do think adding the little snowflake really tops off the look and I
love how it turned out. You all have to let me know in the
comments what you think about this project.
Now this project is a pair of skis and a wall decor piece.
Now we're going to start with two five gallon paint stir sticks sold in three
packs from Lowe's for 98 cents and one jumbo skewer from the Dollar
Tree. Now if you can't find them at the Dollar
Tree you can also get these from Walmart in their camping section
and they're only 88 cents a pack there. So we're going to go ahead and start off
with those paint stir sticks. Now I wanted to cut them down to about
15 inches so I'm making a mark making sure that the parts you cut off
is the handle part. So to hold these together I like to
tape them together with some painter's tape just so they don't shift while I'm
cutting them. Now to cut them I am going to be using my manual
miter saw, miter box saw here. You can use an
electric saw if you have one but I wanted to show you that these are easily
cut with a miter box as well. So we did cut
off that handle at that 15 inch mark and now on the other side we
wanted to kind of cut a point. So the miter box does
come with a miter cut which is a 45 degree
cut as shown here. So I'm just going to overlap that edge
and you can see it cut off one side of that miter.
I'm going to flip the stack over place the saw back in place
and saw off the other side and now you have a point at the end.
So now you can take your pieces apart and I didn't want my point to be so
sharp. I'm going to dull it out so I'm taking a pair of my wire clippers
and I'm snipping off that point kind of rounding it out so I can achieve
the look that I'm going for. And then I'm going to go in with a piece
of sandpaper just to smooth everything nice and smooth and make it a little bit
more round what I'm going for. So now that that's done we can stain it.
I'm going to be using my waverly antique wax
and I'm going to apply one nice coat on the top and the sides of both of my
pieces. And once both pieces are done make sure
you go over it with a paper towel to remove all of that excess wax.
Now go ahead and grab one of those skewers out of the package. Now you can
also use eighth inch dowels if you can't find skewers as well.
And I'm cutting them down to about 13 inches and I need two
pieces. Now for the ends on the cut ends of these I'm just going to sand them
down until they get to a little point. You can also use a pencil sharpener to
do this. Now for the excess piece of that piece
that you cut we are going to cut two additional pieces about three quarters
of an inch and these will act as a piece on our
ski poles. So on the flat side of your skewer I'm
just going to apply a dot of that hot glue and place that little
three quarter inch piece on the end. And then also do that for the
other one as well so you'll have a set of completed ski poles.
Now I wanted my ski poles to be black so I'm going to be using
my black acrylic paint to paint these and I'm just going to apply
about two coats of this over the entire ski pole
and making sure that you cover all of the creases especially where the glue
meets the piece. Now once these dry we are going to grab
our skis and I wanted to add decorative accents to this so
I'm going to be using my paint pen that I got from Amazon. I'll be sure to link
it in the description box below but you can certainly use acrylic paint
to do this as well. So I'm first going to draw a line
across the top. Now notice I do have my skis
side by side because I wanted the lines to be the same on both of my skis
so I'm doing them at the same time and I'm doing one line across the bottom and
two lines across the top. Now in between the top two lines I'm
going to go across again with my black acrylic paint and I'm putting a line
right in between there as a decorative accent
and then at the bottom I'm going to put one black line on top
of the white line that I made with my paint pen
at the bottom. So now you have your two decorative skis and allow those to dry.
Now once they're dry we can form our ski design. So I wanted them to crisscross
so go ahead and crisscross them. Mark them with a pencil and then I'm
going to add a nice bit of hot glue where they
crisscross and place it right back on top
pressing it firmly making sure they're bonded. Once they're bonded flip it over
and I'm going to add a little bit of extra security by using some of these
3 8 inch staples and I'm going to staple a few times in the back
and there we have it our skis are nice and secure.
So now we're going to work on attaching our ski poles and we're going to
crisscross them right on top of our skis. So we're only
going to apply that first one directly to the ski and we're just going to put
hot glue right in the center and lay it on top.
Now for the second one we're going to do a little different. I didn't want the
wobbly fixture of it laying on top of the other one
so we are going to cut this in half and then remove another quarter inch of the
ski and then of the the ski pole and then
lay it down on top so it's two separate pieces.
No worries this will be covered up in the end so you don't want to see it
but it will make the pieces more secure. So once all your ski poles are nice and
secure we're going to add our our greenery accent. So I have a piece of
cedar here I have some snow dusted pine pieces with pine cones and a
berry bundle that I got from Dollar Tree and all I'm
going to do with this is I'm going to tie this bundle together with some jute
twine and then wrap it around the bottom
just a few times and then tie it off in the back.
Now once that's all done we are going to go ahead and clip off any excess stem
and add just a dab of hot glue at the bottom
to make sure that stays nice and secure. Now before we attach that bundle to it I
wanted to add my hanging string. Now you can use jute twine but I chose
to use this fishing line because I didn't want my string to be
visible while it's hanging. So I'm just going to
add a line of that hot glue at the top of each one of the skis
and lay two or three inches of that fishing line
in the hot glue trim it off and now you have
kind of an invisible hanger here that you can use to hang it.
Now to add a little bit more security I am going in with some shorter staples
and applying two on each side just to make sure that
that fishing line does stay in place. Now we can apply our
greenery bundle. I didn't want to hot glue it because I wanted this to be
interchangeable so what I'm doing is kind of weaving a piece
of jute twine in the back of the bundle and once I get that
woven through the back I'm going to flip it over and then I'm just going to tie
this into place. Now this is perfect so you can change it
out during the season with whatever decor you would like and
it's nice and secure on the front. Now as a final accent I'm adding one of
these black and white ribbons to the bottom. I
think that this finishes off the look perfectly
and I'm hot gluing it to the bottom of the bundle
and now your piece is ready to go on display.
And you guys here it is it's all set up and I
love how this turned out. Now the beautiful combination of the winter
greenery along with the stained wood looks so
amazing and would probably fit into any winter
themed decor display and the greenery can be interchangeable too so you could
switch it out throughout the winter and holiday
season. Now I hope you all give this awesome
project a try. Now this project is a Let It Snow Wood Sign.
Now we're going to need one of these Let It Snow Wood Signs from the Dollar Tree
and we're going to need a Wood Kids Puzzle from the Dollar Tree.
Now what we're going to do is start off with the Wood Kids Puzzle. We're going to
remove it from all of its packaging first. Now I like to
remove all of the pieces and hot glue them into place because I
wanted this to be a very smooth back but you can certainly
repurpose these pieces if you have a need for them.
Now I didn't need them so I just hot glued them back on the back
and that'll make the back of the project nice and smooth.
Now I'm also going to sand off the little stamp on the back of the wood piece
so it won't show in my project. Now once that's
sanded off we can proceed with staining and I'm going to be using
my Waverly Antique Wax. Now as always you can certainly use traditional stain
if you like to. Now I am going to cover the entire back of it and also don't
forget to get around those edges as well. Now once it's all
covered go over it with a paper towel to remove
all of the excess wax. So now what you want to do is sit this to the side to
dry and we're going to grab our sign. Now this Let It Snow sign is a
little larger than our wood puzzle so what we're going
to do is we are going to mark off the top of the letters where we need to trim
it down so it'll fit right on top of our sign. Now
once it's all marked it's easy to cut it off
right where you marked it with a pair of standard scissors.
And now we'll do one last test fit and everything fits perfectly.
Now we're going to be painting our sign and I'm going to be using some
black acrylic paint. I'm also going to be using some white acrylic paint.
Now we're going to be painting our black first so we want to go ahead and tape
off the edge of the letters so we don't get any black paint on
our snowflake. Now I'm just going to be applying one nice coat of this black
acrylic paint on the top of the letters and in the
sides of the letters where it's exposed. Now here are all of my letters painted
in that black acrylic paint and it looks great. Now once it starts to
dry we're going to remove that tape and then we can go in with our white
acrylic paint and we're going to give a nice coat to
our snowflake. We're going to let that dry and give a second coat as well.
And here's our snowflake all nice and painted and everything is good to go.
So now that everything is dry we're going to grab our sign and I wanted my
letters to pop so I'm going to use my acrylic paint pen to outline my
letters. Now I did get these paint pens from Amazon. I will link them in the
description box below but you can certainly use some acrylic
paint and a fine paintbrush to get the same effect
and here is what it looks like. And now what we're going to do is apply it to
the top of our wood sign. Now to do this I'm only going to
apply some hot glue to the back of it in a few
areas and then carefully place it right on the top of the wood sign in
the center. Now once it's nice and secure we are going to be
adding a hanger to this and what I decided to do was to use
some wood beads. Now I have some white beads and black beads
and I actually am repurposing these beads from a garland
that I got from Walmart last year so they're selling it this year. I suggest
you grab some of those and you can repurpose them as well.
So what I'm going to do is take some jute twine. I'm going to add a little
hot glue to the end to make it so it doesn't fray
and I'm going to start adding my beads to it.
Now the order that I'm adding them are two white beads, one black bead and
repeating that process since I have more white beads than black beads on
hand and I'm going to repeat this until I get my
desired length. Now I'm going to tie a knot on each end
just so those beads remain in place making sure that you have
at least three inches of a tail on each end.
So go ahead and flip your sign over. You want to align your beads at the top
about an inch in from the edge. You want to apply a line of hot glue and
place the tail of those beads right in that line of
glue. You want to do this on each side of your
sign and once it dries you can go ahead and
we are going to cover the back of the project. You guys know I
love to finish off my projects with a backing so all we have to do is
I'm going to be using some brown craft paper
and I'm going to apply a bead of hot glue along
the back of that puzzle just making sure there's enough where it adhere
evenly. Flip it over and adhere it to your craft paper.
You want to press it real firmly into there to make sure it's nice and bonded.
Now once it's bonded go ahead and protect your work surface and use
an exacto knife or a utility knife and carefully
trim that craft paper off around the edges.
Now once you get around the beads you want to be careful going around those
making sure you don't cut the jute twine holding them in place.
And here you have it. It is nice and secure. The back looks
super clean and professional and now this is ready to hang or give
as a gift. And here it is on display. Now I'm
really excited about how this turned out. I think the lettering looks great and
you can do a solid or a ticking outline if you choose.
I really hope that you all are enjoying these crafts so far
but I wanted to pop in really quick and let you all know
that you could follow me on all of these platforms
at SheSewCraft.com. So now let's jump right into that next DIY.
Now this project is a wood tree decor display.
We're going to need some cork craft sticks from Lowe's and these are 98
cents. We're going to need two sizes of the
popsicle sticks from the Dollar Tree and we're going to need one of these box
wall art pieces from the Dollar Tree. We're going to grab all of our sticks
and we're going to have three different sizes to work with. So we're
going to start with the larger cork craft sticks from Lowe's and I'm going
to lay one down the center and then several on top. Now I'm going to
lay these out and space them about an eighth of an inch apart.
Once you get your spacing right I'm going to use my hot glue
and I'm going to start hot gluing the sticks all the way down
that center stick. Now here are all the pieces
all nice and secured in place and we just want to repeat this process for
your smaller sticks and also your medium sticks the same
away. And so now we have three sets all glued together and ready to go.
Now for the smaller one I'm just going to cut a triangle out so I'm using my
ruler just to get a nice triangular shape and I'm going to trace it on
with a pencil. Now once you have that on there all you have to do is take a nice
sharp pair of scissors and this should easily be able to cut
right off. Now here is my smaller tree all cut out and ready to go
and now we can work on our medium tree. Now I'm also going to trace
a triangular shape with this one as well with my ruler and use my scissors to cut
this one out as well. And here is my medium tree ready to go.
So now for the larger tree I am actually going to make a triangular shape but I'm
going really wide on this and the top points do
not connect. Now we're going to be styling this a
little differently so we're going to have to cut a
wide base for this. So again we are just going to cut down the sides making sure
we have that triangular shape and you'll notice how the top is really
wide. So now what I'm going to do on each corner of each
stick I'm going in at a 45 degree angle and I'm kind of just eyeballing this and
I'm going to do this at the end of each one of the sticks as shown
here. Now once you get your guide you're going
to go ahead and cut the pieces off starting at the corner of the stick
up to the top and you'll notice how it'll start this staggered effect.
And here is our tree all nice and cut out and now you have all three
ready to go. Now what we're going to do now is we are going to
Now I will be using some white acrylic paint for this.
I'll also be using some black acrylic paint
and some um Waverly Antique Wax or you can use
some brown paint. Now I'm going to start with my larger tree
and I am going to be painting my larger tree in black acrylic paint
and you want to apply one nice coat of the paint
all over the front and inside the creases of the tree
and you also want to paint the back as well. Now once it dries you can get the
little tab at the bottom where you're holding
on to and complete that as well. Now for the middle tree I am going to
paint that white on the front and back as well
and then for the middle sized tree I am going to paint that one with Antique
Wax with a firm brush and then wipe that off with a paper
towel on the front and back as well. Now I did decide while I was working
with this I wanted a kind of a stand on the back so I can mount them
so I'm using some leftover tumbling tower blocks and I'm going to glue two
blocks together for the black tree and what I'm going to do is I am going
to adhere it to the back of the black tree
at the bottom. So the first thing we have to do is cut the bottom at a straight
edge and then I'm going to apply that double
stacked block at the bottom making sure the bottom of the block is even with the
bottom of the tree stump. Now I'm going to do this
for the middle tree and the other tree as well and we'll be applying
one block to those. Now you definitely could have done this beforehand but this
was a last minute decision and it worked out perfectly
so what you have to do now is to finally paint them to match
your trees and here is what the final project would look like
and make sure you do any touch-ups you need to do before it completely dries.
Now once that's done we can start working on our
framed box. So we're going to remove it from the packaging
and what we want to do is it has this little raised
frame edge on it so I'm going to go in with my little
utility knife and start peeling it off. Now normally this will pop
right up but Dollar Tree really went heavy with the glue on this one
so I'm using my utility knife to kind of peel it off. It doesn't have to be
perfect on the top here. We will be covering that anyway. I'm
going to use some of those leftover cord craft sticks and I'm going to be
covering the top of this box to give it a wood look. So I'm
taking one of the craft sticks lining it up with the top and I'm marking
each edge as shown here and then I'm going to cut it off where
I marked. Now we're going to remeasure make sure
everything fits and now that it fits we're going to use
this stick as a template to create more sticks cut off at this length.
Now here are all of my sticks ready to go and now we can start applying them
to the top of the box. Now to do this I'm just going to add a generous amount of
that hot glue to the stick and press it firmly into place making sure that it's
aligned with all of those edges. Now you want to align them very closely
together all the way down the box. Now you notice
at the very end there's just a slither of a piece
peeking out there so I'm just going to mark it off. I'm
going to draw a line with my ruler for the width of that piece that I need
and then I'm going to take that craft stick and I'm just going to cut that
piece off with my exacto or utility knife. Now
once you have your piece ready to go all you have to do is take
your glue you're going to run a bead of glue down the side of the box
and then all you have to do is press that piece into place and it fits in
there seamlessly. Okay now that that's done we are
going to go in with our waverly antique wax and we are going to stain
these sticks. Now all you have to do is you just
apply it right on top making sure that you get the top
and the sides. Now if you get any antique wax on the checkered print
you can wipe that off with a wet wipe and then let everything completely dry.
So now that our pieces are now all dry we can start assembling our project. So
I'm going to start with my largest tree and I'm going to apply a generous
amount of hot glue on that stump and then secure it into place on the
far back end of the top of the wood platform. And then I want to apply each
one of the trees on either side of the tallest tree as shown here
leaving a little gap between them so you can work in
some greenery. Now the greenery is definitely optional but I just think it
adds a little bit more character to the piece
so I'm taking some miscellaneous pieces that I had on
hand which are cedar sprigs and I'm just sticking them
in and around the tree and I'm loving how this looks.
Now if you did want to get a little bit more fancy with it you can use
some fairy lights and these are Dollar Tree fairy lights and I'm just
interwinding them in between the trees and the greenery and I do suggest
that if you do add lights add them before your greenery
but putting them in there does add just a little bit of
of sparkle and then you can tuck that battery pack right underneath.
And here is what they look like in the test
and here you have it you guys a sweet winter display of trees
for your decor. Now I love all of the different sizes and dimensions of these
and you can paint or stain them in any way that you like
and I think that adding the greenery gives it a little more dimension and
visual interest. Now you can choose to display this as
or you can add even more to it to be festive like adding
some lights. Now I love how the lights look on these pieces.
Now for these I did use a strand of Dollar Tree battery
fairy lights for a little sparkle and I think they look
awesome. Now I think that this display is the perfect size for battery lights
and you can simply tape that battery pack under the open bottom
of the art piece. You all have to let me know what you think of this project in
the comments. So the next project is a set of wood
top candle stands. Now we're going to need two
wood circles from Walmart for 97 cents, two candle holders from the Dollar Tree
and two of these miniature wreaths from the Dollar
Tree. So the first thing you're going to do
is take those wood rounds and you want to remove the plastic hangers,
the staple on the back and those stickers from the front.
Now again we are going to be using our Waverly Antique Wax to
stain these. You can use traditional stain if you like but I'm going to use
Waverly Antique Wax and I'm going to put a coat on
the top, the back and also make sure you get into the sides
really well. And once that's applied go over with a paper towel to remove
any excess wax. Now here are both of my pieces
nice and stained and now allow them to completely dry.
So now that they're dry we can take those rounds and our candle holders and
we are going to be adhering them together as shown here. Now for
this project I am using hot glue because I plan on repurposing these in another
project but if you want this to be permanent
definitely use E6000 or something similar
to bond these together. And here are both of my rounds
bonded to the top of each one of my candle holders.
So now all you have to do is grab your little
mini wreaths and remove those tags. And I love these mini wreaths. This is my
first time seeing them so I was so happy to find a project for them
and I'm going to take two of those LED Dollar Tree candles,
put it around it and then sit it right on top of that candle stand. I mean
that is so gorgeous. I love how that looks and we're going to do that for
both of our candle stands. And there you have it super simple and
easy yet so beautiful. Now this was the first
time I found the little mini wreaths at Dollar Tree and I'm so glad that I
designed a project that I could use them in.
And these colors are so warm and cozy and they fit right into
a neutral holiday decor theme. Now you can use these year-round in your
home by simply changing up the florals too. Now there are other
ways to display these candle holders as well.
Now you can easily stack one on top of the other and
now you have a two-tier stand and I really love this idea too.
Now this project is a metal deer decor piece.
Now we're going to need one of these tall metal deer decor pieces from the
Dollar Tree in the Dollar Tree Plus section. Now
this deer was only five dollars which I thought was a really great deal for its
size. So I had to just get it to craft with.
So what I'm going to do is first of all take my deer. I'm going to go ahead and
remove all of the price tags and everything from the bottom
and then I'm going to remove that greenery and it just came
right off with no problem. You want to make sure your deer is nice and clean
and dust free. And then what I'm going to do is I'm
going to go in with a couple of coats of this flat
black spray paint by Krylon and then allow that to completely dry.
Now here is my deer all nice and dry and I love
how the finished look turned out. It totally changes up the look.
Now for my winter DIY I decided to add an accent with some of this greenery.
I have some of these berries from the Dollar Tree
and I also have some of these frosted pine cones from the Dollar Tree as well
as some black and white checkered ribbon.
Now in order to keep this useful all year round and interchangeable
what I'm going to do is I'm going to cut out a piece of ribbon and instead of
adhering the greenery to the actual deer I'm
going to be adhering it to the ribbon so I'll be able
to tie it on and remove it as I need and
as I need to interchange it throughout the year. So I'm going to start with two
these pieces of some cedar branches that I had on hand
and I'm just going to randomly place them on there and hot glue them
to the ribbon. You just want to make sure you add a generous amount of hot glue
since the ribbon will be holding these up and we're going to be
stacking these so adding more hot glue at the center
will definitely keep this real sturdy on the display.
Now after that I'm going to add some of these frosted pine pieces to the top
the same way and then once that's done I'm going to add
some of the frosted pine cones to the bunch
and then I'm going to trim down some of those berries and I'm going to add
that berry bunch right on top of the pine cones.
Now here's what my bunch looks like now. Now before I start trimming what I want
to do is I want to go ahead and tie it around my deer so I make sure it's the
perfect size and I'm just going to tie a little bow
in the back. Now here is my bundle on my deer
and it looks a little large for what I would like so what I'm going to do is
now I'm going to trim it down to the size that I'm happy with. So now
that I finally trimmed it down it's a little bit more slim so I like the way
this looks but it still looked like it was missing
just a little bit of an accent so what I wanted to do was add
some more of that black and white ribbon so I am going to remove
that berry bundle because that's where I want to put my
ribbon bow. So I'm going to add a dot of hot glue there and place it
right above those pine cones and then once that's in place this is
what the bundle will look like and now what I'm going to do is I'm going
to add that berry bundle right above that bow that I just added
just to add that little pop of neutral berry color to the bundle
and now your deer is ready to place on display
and there you have it you can now display your new
updated deer creation. Now I'm so happy that I painted the deer black because it
gives it a nice fresh and modern look without taking
away from the beauty of the piece and then you can remove or swap out the
greenery as you please in order to display this piece year
round. Now you all have to let me know what you think of this project in the
comments below. Now this project is a three-piece framed
snowflake decor set. We're going to need some of these
medium-sized snowflakes from the Dollar Tree,
some tumbling tower blocks from the Dollar Tree,
and some black foam board from the Dollar Tree.
Now we're going to start off with our snowflakes and we want to take three
out of the package. Now with these three snowflakes I am going to
be removing those hanging strings. We won't be needing them for the project
but I will grab my wire clippers as well because what we want to do
is cut apart two of the three snowflakes to make them
look different. I'm trying to design three different
snowflake styles and you can cut these however you wish.
You can just cut different parts and pieces of them. You just want three
different looks and here are the three different looks that I came up with
for my snowflakes. So now what you want to do is take these
out and give them a couple of coats of this satin bright white by Krylon
or you can use chalk paint or acrylic paint if you like.
Now while those dry we are going to work on some frames and I'm going to be using
tumbling tower blocks for this project. So for the first set of blocks we are
going to be joining together our sets of three.
So I just want to join three blocks together and I'm using
my Surebonder wood stick hot glue or you can use some Fixi
woodworking glue for this or you can use regular wood glue.
Now what we're going to do is we're going to make 12 of these three block
sets and here they all are ready to go and separate
them into groups of four. Now we're going to put together our
frames. So we're going to put together the frames as shown here
making sure we're forming that L shape in the corner.
You want to just rotate it around and then you want to add another
three block set into that corner as well. Now
just want to make sure that you join them as shown here so you make sure
that you have a perfect square when you are done
joining your ends together. Now once you have those three sides just
add that last piece which should fit perfectly into that
open area. Apply your glue and then press that
firmly into place. Now here is one of the frames and you
just want to repeat it two more times to have three square frames. Now what
we're going to do is we're going to take our three frames and I'm going to be
staining these with Waverly Antique Wax. Now you can certainly use traditional
stain if you like to but I'm going to be using
Waverly Antique Wax for these frames. Just apply the wax on the front,
the sides, and the inside of each frame. There's no need to stain
the back of them. And here are all three frames stained so just go over them
with a paper towel to remove all the excess wax and allow them to completely
dry. Now once they're dry we're going to grab our foam board and what we're going
to do is we're going to cut out three pieces of foam board the same size
as each one of my frames. So I'm taking a frame, I'm laying it on
top, and I'm tracing the outside of the frame onto the foam
board three times. Now once they're all traced I'm going to
take my ruler and you could take a utility knife or an exacto knife
and you want to cut out all of those squares on the lines that you traced.
Now once you have all three of your squares all cut out I like to go ahead
and cut off an additional quarter inch on two of the sides of the square
and this will prevent it from showing from the front of the frame.
Now you want to repeat this for all of your foam board squares so they'll fit
perfectly as shown here. So now that we have everything all nice
and cut out we are going to lay the frames with a good side facing down
and we are going to start to apply the backing. So I'm just going to go
around the back of the frame with a bead of the hot glue and press
that foam board right in the center. You want to repeat
this for all three and here are your frames
ready to go. So flip them back over and now we're going to add a hang string on
the back and this is just a piece of jute twine with knots tied on each
end. Now you can certainly sit these or hang these however you want to
but I wanted to plot to apply the string to each one of them in case I decided
to hang them. And to cover up those knots I'm just
going to add a piece of this craft paper right over there and
this just gives it a really nice clean look covering up all of the
glue and the knots of the string. Now you just want to repeat this for all
three of your frames and here are the backs of your frames so
go ahead and flip those over and grab those snowflakes which should be nice
and dry now. We're just going to apply each one into
each one of the frames making sure that it's nice and centered.
Now to avoid any glue mess I'm only applying glue to the very
center of the snowflake and gently pressing the center in place and this
should hold that snowflake right in place and it
should not budge. And here is what they will all look like.
And now you can place these on display and enjoy these super
cute pieces. Now I love how simple it was to create these and how the warm look
will blend into most home decor. Now you can choose to
hang these, lean these, or put them on picture easels to display them too.
It's all up to you and how they will work in your personal space.
Let me know what you think of this project in the comments below.
Now we're going to need some tumbling tower blocks from the Dollar Tree
and we're also going to need some skewers from the Dollar Tree or Walmart
for 88 cents. We're going to need an assortment of
bottle tree brushes from the Dollar Tree and you can even use the cobblestone
trees from the Dollar Tree as well. So we're going to start off with our
blocks and what we're going to do is do grab up four blocks and we're going to
make sets of four and we're going to end up
making 15 sets of four in order to make three boxes for our
project and we're just going to glue those
side by side just like we did before. Now here is one of our four block sets
and just repeat this until you have 15 total sets. Now I placed these in
stacks of five because we'll need five for each one of the boxes.
So one of the sets will be the bottom of the box and all we're going to do
is place a set of blocks all the way around it. So I like to start
at the sides first, the longer sides, and I'm just going to hot glue
a four block set on each side. Now you want to put it on each side and now your
box will form a u-shape and then close in each side with
another four block set as shown here with hot glue.
And here is what one of your boxes will look like.
Just repeat this until your other two are complete as well.
And now what I'm going to do is grab my skewers. I'm just going to grab two or
three out of the package and I want to add a crisscross design on
the front of my box and I'm going to use the skewers to do that.
So I'm going to have a die. I'm going to lay it out diagonally and mark that
corner. Now you can easily cut these with wire
clippers or scissors but I'm using these pet claw clips from the
Dollar Tree. I find that these don't crush the skewer down
so I like to use those and that's a good buy for a dollar from the Dollar Tree.
And so you just want to add your hot glue along the edge of that skewer and
place it right across the center as shown here.
Now we're going to lay the other piece crisscrossed across it in an X.
We're going to mark that and we're going to cut that as well. Now we don't want it
going over the other skewer. We'll have to cut this down in the
middle and we'll do some trimming later so no worries about it being too long.
So now we're just going to hot glue each one of those two separate pieces to form
that X shape on the front of the box just making sure each piece goes
corner to corner nice and even. Now once your pieces are nice and laid
you just want to allow them to dry and this is what they'll look like and
then you can go in and trim off any overlapped corners on each one of the
skewers on all three of the boxes. So now that the boxes are done we can
add our antique wax and again I am going to be using my
paintbrush to get down to the bottom of my container here
and what I'm going to do is I'm going to start staining the inside first. Now once
I stain the inside I am going to go around with a cloth and
wipe off any excess and then I'm going to stain the outside
of the boxes and here's what one looks like.
Just repeat this for your other two boxes.
And now that those are done you just want to allow them to sit and completely
dry. So now that they're dry we can add our
trees. So I'm going to grab the tallest one of the cobblestone trees
and then I'm going to remove the tags from the two taller
bottle brush trees. Now the taller bottle brush trees fit perfectly
inside of the box here so I'm going to place one inside of each one.
Now the cobblestone tree sits a little low so what I'm going to do is I'm going
to take two extra tumbling tar blocks. I'm going to glue them side by side
sit it in the bottom just to give it a little boost
and that looks perfect for the tinier tree.
Now even though the boxes look great I'm going to go ahead and add a little bow
on the top of each one as an accent and to tie it into the other DIYs
and once you just put a dot of hot glue on those and secure them
you're ready to display these pieces. And how simple was that? I just love how
cute these turned out. Now these little trees are so much fun
to add to your crafts and the boxes make the perfect way to
display them. Now I really had fun creating these
projects today and I really hope that they have inspired you.
Now as always I love them all but let me know in the comments
which one was your favorite today. Listen I hope that you all enjoyed seeing these
creations again or for some of you for the very first time.
The neutral ideas are fun to create and I hope that they have inspired you.
Now if you did love this video tap that thumbs up and share this video with your
friends. Now these videos packed with ideas are
so much fun and if you don't want to miss my next one just click my She Sew
Crafty logo on your screen and tap that bell to be notified when we
go live. Thank you so much for watching and I'll
see you all next time.
