Decoraciones navideñas en tonos neutros con reciclaje

General decoration, make cute bracelets
12 followers
5 Video Views·Dec 9, 2022
Decoraciones navideñas en tonos neutros con reciclaje
We will mark and cut two triangles of the size that we like best
Then I will glue the two triangles together to make the stick thicker since this cardboard is very thin
We will need two of these triangles for this decoration
For the first option of the pine cone I will use the strands from a mop or a floor cloth
That depends on how they call it in each country
With which I will make a braid of six cords
At the end of each braid I'll place a small dot of hot glue and use my fingers to stick all the ends together and then cut off the excess
And since the strands are short I'll be joining several braids until I have a ribbon long enough to cover the entire little pine
I will also cut off the end that connects to the binding by gluing the ends
Once this is done I will carefully wrap the entire sapling with this lovely braid
Perfect for those who rarely find wool in this shade or thickness
Remember that we have to gradually braid and place a thread of hot glue for each turn we make
The delay in this process is waiting for the silicon to cool as we roll up the braid
If you're enjoying the video and what I do don't forget to give me a thumbs up share the video and subscribe to the channel to see more ideas like this
With a little bit of hot glue we will attach an ice cream stick which will be the stem of our little pinecone
I'll just add a cord to both sides of the stick so it doesn't show as much and somewhat hides the cardboard
And this is how our first piece is turning out now we'll set it aside and move on to the second
I'll line the second piece with gray burlap
And if by any chance they can't find it in the market they can make it with old cotton shirt scraps
For this decoration I have selected these two neutral color tones because they look very nice and elegant
The lining of these little pincers is very easy since we just need to wind the yarn and apply a thread of hot glue with each turn
Wait a moment for the glue to cool down before continuing with the turns
The great thing is that we can also do it together with the little ones
We finally tied the end securely and cut off the excess thread
We place a small dot of hot silicone at the bottom and insert a stick or palette stick that will form our trunk or stem
Finally we covered the remaining spaces with the same yarn
This is how it looks now
For decorating the baby's head the first thing I will do is cut and paste printed ribbons with snowflakes and little stars
Playing a little with the thickness and colors to create a beautiful composition
For the stars I will use these small sticks which I will paint and glue to the top of each pinecone
I decorated the white bow with some brown leaves
A ribbon of the same color with a small bell
I stuck a white gingerbread man I made with clay and a cookie cutter on the other little stick
I finish with a bow
We now only have to make the small pots or the base that will support the saplings
I made a simple mold out of cardboard and lined it with tape for the base of our little project
If you have any questions doubts or suggestions feel free to leave them in the comment box below and I will be happy to respond to you
Remember to turn on the bell so you receive a notification when I upload a new video and never miss anything on the channel
I also make sure to seal the joints very well with hot silicone to prevent leaks this is very important
We will need two of these molds one for each post
Then I prepare a mixture of white cement and pour it into the cardboard molds
I tap it to make the cement settle properly and place the stakes
And I guarantee it with small cardboard pieces so it won't move during the base drying process
Once this is done we will let the cement dry for about 24 hours preferably two full days
If they can soak it in water the curing would be much better
Once dry I quickly remove the cardboard molds
In this part you have to be careful and remove the mold slowly because if the piece is not properly cured it can break
We will smooth the sharp edges with a file or a whetstone
And we will remove the excess dust with a brush or a cloth
In this case I remove the largest amount of dust with a small brush and the rest with a damp cloth
This is how simple and easy we have created these beautiful little pines in neutral tones
Perfect for decorating this Christmas
Tell me in the comments which of the two little ones was your favorite
I saw green trays where the eggs and some dry foods come
And I had the idea to modify one of them
I will pour white glue baking soda and black paint into a container
In this case I am using one for furniture
Then we will mix all the ingredients well with a spatula
I will apply the paint gradually with a sponge until the entire surface of the tray is covered
We will apply one or two layers depending on the coverage
We will let it dry thoroughly
Once dry it will be hard and durable
For the next step we will need toilet paper which we will cut and moisten with water and white glue
We will keep enrolling until we get a fairly compact group
In this part we must add the right amount of water to avoid tearing the paper when we roll it
Before I braid the paper cord I will make several simple three-strand braids
Although I'm thinking it would look very good with the four-strand braid
Although this is up to each person's preference
I made three for the border and one for the handles
Then I will glue the braids all around the edge of the tray with white glue
To prevent it from moving while the project dries we will secure it with some clips
To reinforce the braid I will also give it an extra layer of white glue and let it dry thoroughly
If you don't want to complicate your life you can make braids from wool or another material you have at home
And thus we will avoid the gluing and drying process and go straight to painting
I will also attach a piece of gray fabric with white glue as a base
It also has a nice snowflake pattern in white
I will reinforce the fabric with an extra layer of white glue which I will spread evenly over the entire base
I will put a paper strip on top of the tray to decorate it and make the edge less visible
We will let it dry for a full day so the project will be hard and durable
If you're liking the video and what I'm doing don't forget to give me a thumbs up share the video and subscribe to the channel to see more ideas like this
If you have any questions doubts or suggestions feel free to leave them in the comments section below and I will be happy to respond
Remember to turn on the bell so you receive a notification when I upload a new video and never miss anything on the channel
I recommend following me on my other social media platforms because I post many interesting things
You can find me on all of them as escalidamadragón
I will apply a thin coat of white paint using the dry brush technique to add light and reduce the dark tone of the tray
Remember that if you don't like black as a base color you can use a dark tone that matches the decoration
For example in this case I would use a quite dark red or a wine red to match the rest of the elements
Use the color we use in our decoration and adapt it to theme
For the red color I have decided to put a one-centimeter wide tape around the entire edge of the tray
Covering a few imperfections and also decorating it to look more beautiful
We can attach this tape using hot glue or your preferred adhesive
For now it's looking like this
Now I'll attach a couple of handles I cut from the same paper braid
I'll attach a small piece of red ribbon to each end of the handle matching the outline
We will then attach both handles to each side of the tray
This will give it another nice and distinctive touch
I finished the tray by pasting three white paper flowers in one corner to give it that elegant touch
Although as always I tell you these are optional and up to each person's preference
It is very useful to place in the entrance hall to set down the keys and other items we bring from our pockets when entering our home
Although we can also use it as a jewelry box or tray to place what we want
Please let me know in the comments if you liked this idea and where you would like to place it because I'll be paying attention to all of them
Until here is today's craft hoping you liked it
Now I really say goodbye and hope to see you in the next video
I send you a fierce hug and a dragon's breath kiss from here
Thank you for looking at me until next time Bye
