How to prune stone fruit trees - peach, apricot, plum, nectarine, etc - open center (vase shape)

Canadian Permaculture Legacy
316 followers
81 Video Views·Dec 9, 2022
Okay, so we're going to do some pruning videos on stone fruit.
We're going to do some peaches, some cherries.
Just in general, you're going to want to have tools.
I've been pruning a bit all day.
You want to have nice sharp tools, clean.
You want to clean them with alcohol.
And you're going to want pruners and then a pruning saw.
You don't want to use hedge trimmers or loppers
because they'll compress the wood and they'll damage the fibers in the cell walls
and it'll cause excess bleeding for the tree
and then it'll also kind of make it susceptible to some diseases.
When you're pruning a tree, for stone fruit, you want to make an open centre.
For apples and pears, you want to do a central leader style.
So what are the differences?
So an open centre is like a vase.
It's like a dome.
A dome in nature is a very strong physical support structure.
So we're going to take that dome structure, we flip it upside down
and we're going to make an open vase.
So most stone fruits, peaches, plums, pears, apricots, they want to spread out.
Apples and pears, they tend to grow very vertical.
They grow very vertical and then they throw out little spurs
and the fruit grows on spur wood.
I'll do an apple, pear pruning video another time.
They're going to be done differently.
But for the peaches and the plums and cherries and apricots,
they're going to do open centres.
So what we want to do is, somewhere between knee height, shoulder height,
ideally we want to have no more central leader.
So we want the stem to come up and sometime around knee to shoulder height
we want to pick three or four scaffold branches.
If you're looking down, straight down the centre of the tree,
radially equidistant from each other.
So you want three branches about 120 degrees apart
or you want four branches about 90 degrees apart.
And our goal is going to be that we want to fill the 3D space around the tree.
So here's a cherry. I'll just show you real quick.
This cherry is kind of growing to a central leader right now.
So I have a couple options.
I could just lop it right here and I could cut this off.
I have to pick my support branches.
And you want them to be slightly separated vertically on the tree as well.
You don't want two coming out of the same spot
because it will tend to snap the tree in half when it's older.
This cherry, because of the way that it is right now,
and because I have a lot of deer browse on this area,
I want to be really careful pruning these too much because the deer help me prune them.
So this one I'm going to think I'm going to kind of keep it somewhat central leader.
I want to prune off some of the lower branch growth
so I think this one is going to come right off.
And then the other thing you're looking for is you're looking for three things.
You're looking for vertical branches coming straight off of a branch.
Anything coming straight up vertical.
You want inward growing branches like this one right here.
See how this one is going to come out this way.
That one is going to be growing inward.
These ones are kind of growing inward.
So you want to knock off inward growing branches.
And then you want to knock off any that are going to end up crossing.
So this branch here would end up crossing in the future,
so we're going to knock that one off.
So you're looking for verticals, crossers, and inward growers.
Those are the main things you're trying to do.
And the goal is that we want to have the center area of the tree to be open.
You'll see in the peach trees I can get a bit more of an open center in the beginning.
This one here, like I said, I have an option.
I can either take this right off,
but because I don't have another branch coming out this way,
this one was a little too low.
I think I'm going to keep this one,
and then I'll just probably forest it open a little bit like this
with some weights, and it'll harden up.
So that's it. Let's go.
This one is pretty good for now.
I'll make a few trimming cleanup cuts,
and then we'll go prune some peaches,
and we'll catch up with you over on the other side.
Okay, so first thing I'm going to do
is I'm going to clean up any inward-growing branches,
tiny little skinny branches,
just kind of tidy it up so I have a better look of the tree.
Okay, so I'm just going to go around.
Anything growing towards the inside is coming out.
Okay.
Anything going straight up vertical is coming out.
Okay, the other thing is,
this one here is coming way out.
It's massive. It's really long.
That's nice, and it's fine,
but in the future,
if this loads up with peaches all the way,
it's going to break. It's going to snap the tree.
So what we want to do is actually give this part up here
a chance to thicken out
and get stronger as its own little scaffold.
I like the area that this is coming in.
It's going to occupy the space of the tree here
where we don't have a whole lot going on,
but I'm going to shorten the length of this,
and I'm going to, when I shorten the length of this,
I want to wait until the angle starts changing vertically a lot,
so I'm kind of looking at maybe around here somewhere,
and then I want to pick a nice outward-facing bud
because I want this to continue growing out afterwards,
so I'm going to pick this one here or this one here.
I think I might take this one here,
and I'm just going to cut it across just above.
Okay, same thing here.
I'm going to remove this top axe.
I'm just going to probably cut back.
Here's a nice outward-facing bud ready to go here.
Okay, here, same thing.
This one's kind of going to end up crossing over here,
so I'm actually going to pull one from it up.
This one here, same thing.
Now, this is a bit of an interesting thing.
There's a pathway here,
so I don't necessarily want this thing
coming back down into the pathway.
I actually want to maybe preferentially fill in sideways this way,
so I might cut it to this bud right here.
Hopefully, then I can have it grow a little funky like that.
Vertical growers, all things coming out.
Crossers, I can actually take it out there.
This one's too small.
This one's going to start crossing,
so I have to pick now between this one and maybe one of these
which one I want to keep growing,
and I think I'm going to...
This one's a little smaller,
but this one's got a lot going on.
I think I might keep...
I'll let that one soak a bit.
I'm not sure which way I'll go on that one yet.
I'm going to shorten this one by a little bit.
That one's vertical.
This really isn't a science.
This is really an art.
You just get going.
You get busy.
You get doing it.
You make mistakes.
You learn.
You find out how the tree responds to your cuts.
And that's just that.
This one here, I might keep...
You know, I've been taking a lot off this tree,
so I'm going to ease up a little bit.
Okay, so if you can come around here this side.
So, this one here,
I got three branches all trying to compete for the same space.
This one here, I can train it to come out this way more,
so I think I'd like to keep this one.
And now I'm going to pick between these two,
which one I like.
And because this one ends up kind of growing very vertical,
and I do have some stuff here that I can train to go out that way,
I don't think I need this one,
so I might actually make a cut right here.
I do like the space between these,
so you know what?
I think I'm going to make this one the cut.
I don't think you can really go wrong here.
You just think twice before you do something.
This is a decent opening.
I think I'm going to do this.
Now, when you're cutting this,
right towards the end,
you want it so that it goes through with the saw nice and clean.
You really want to support the weight.
Look at this tree. It's really, really clean right now.
Now, I have to make a choice between these two,
and I kind of did this to keep this guy,
so I'm going to take this right off.
I'm going to cut it.
I'm going to cut it too small.
I'll keep the one going the way that I like it.
It may not spare much fruit,
but I kind of like these coming out.
I might see who does better this year
and prune the other one back.
So, these ones,
you want to try to keep as many Y's as possible.
This one's splitting three ways,
but it's kind of going in nice open spaces.
The angles are decent.
I'll probably keep these.
I'm going to take this one out
because it's underneath in shading.
This is inward growing.
These are all just too small.
Then, I'll do heading cuts off this
to get it to grow where I want it.
It will grow about here.
It still looks like a nice outward facing bud.
Then, this one.
That's all right.
You know, I actually don't like this one
now that I see it better.
Okay, last tidying up.
So, this here,
this is really crossing.
See, so now that I see it a little better,
I think we're just going to go like this.
I want it getting up and over the pathway.
I'm going to cut it to a nice,
decently high branch.
I don't mind this getting up a little bit
where you can walk under and pick some leaves.
That's kind of nice.
Okay, so the last thing you want to think about
is you want all branches to be about
You might have to get closer.
The last thing you want to think about
is you want all branches to be about the same height.
If you let one get towering over all the other ones,
it's going to steal a lot of the energy
from the other branches.
So, the reason I cut those last ones back
so hard is because I really want
the whole height of the tree to kind of be
roughly the same level.
If I let one of these grow too big,
then what I'll have is
I'll have one of these dominate
become a huge central leader
and get really, really tall and strong
and then it'll really suck the energy
away from all the other ones.
So, I think I'm pretty much done.
Cut this one here.
Because I cut so much
off this tree, I'm going to
leave this one a little bit.
This tree got
absolutely butchered.
I kind of like to cut this off, to be honest,
but I'm going to leave it for now.
I'll take that off next year.
I think we're good.
So, that's a peach tree.
So, this is an apricot tree.
We're going to prune this the same
way that we do the peaches and the plums
and the cherries. We're going to do them open centre.
So,
this one here, when we got it,
it was just a straight up stick.
It was really tall. I wish I would have cut it
and lopped it.
I could
potentially do that right now, just lop it
right here and let it kind of regrow
from there, but
this is good enough.
I'll just focus on getting
wise from here and then I'll
prune it to more of a draping
style, kind of like
a funky apple or something like that.
So, we're going to take off inward growers
and choose this as a
crosser and an inward grower.
If you see this one here, it's kind of going to cross
over where this comes in
unless I want to get rid of that.
It's kind of like that it's going to end up going here.
Then I'm going to look for an outward facing bud
that's coming this way and right
over top of it.
So, this one here, maybe out of here.
We'll see how it grows next year. Maybe out
of here, maybe out of here and I'll try and fill this
space. So, I'm going to pull
this off.
An inward grower. If it's too vertical,
we'll take it straight across
and I'll prune a pruning cut
to try and direct it.
A bud going this way
could probably take that off.
I'm going to see how this grows.
I kind of don't like that one.
I'll see how it grows. One of these two will probably
hopefully...
This one here, it's getting too high.
If I don't pull this one back, it's going to take all the
energy out of this and these other ones.
So, I'm going to have to do a heading cut on this one.
Just to tell you the truth though,
it's going straight forward.
I think that's good for now. We'll watch how these come.
This one here, normally you want to cut
the underground, the undergrowth stuff.
If this comes in strong,
I might leave it
and I might cut this off next year
and kind of have that come out this way,
have this one come out that way.
Maybe if these can start growing
and I can pick a nice one, I can
prune this back to where we have
a couple solid. I can
take this off and pull something
where I have more of an open base
starting lower.
I can always kind of work towards
getting that for this tree here.
This is good for now. Just a nice quick little
clean up.
Okay, that's it for the apricot.
Okay, so
this is the downward kitchen garden.
The lower area.
It's a little shadier down here.
This peach tree, you can
really see how it took off this year.
It's absolutely a beast
of a tree.
The
scaffold branches are pretty
well set up.
I have
a nice spacing in between.
I'd like it to be a little wider,
but this is pretty good. This one's
obviously going to go. It's too much in the middle.
It's clearly the smaller one
and it's not really offering me
anything. It's getting this area
a bit, but I kind of don't
like this one at all. I might keep it
here, but you know what?
When this thing gets bigger,
picture this tree in 10 years.
This is going to be very
congested in here, so you know what?
I'm going to take this
one out here.
The thing that I'm going to also focus on
is
we want to have three
branches coming out, four branches
coming out. The eventual
goal, though, is that for
each of those branches, they're going to
whine at some point. They're going to
split, and you're going to make a
series of fractals inside
the peach tree.
When this one comes up
here, it's going to come up here.
I want this whining somewhere. I would
like it if it was a little further out.
I'd like it if it was a little
further away, but it is what it is.
I want it
whining at some point, so I'll probably
be taking this middle one out here as well.
Once it gets up here,
I want to try to encourage
whining at some point.
This is a great whine right here. This one's
going up in the middle.
I do want each one to whine,
and then I want each of those
to whine.
Ten years down the road, that's how you
want to have it. You want to have a bunch of whines.
We say open vase,
but that's just the first couple years that you're
setting up. Afterwards, each one
of those fingers, each one of those
branches on that vase are going to whine,
and they're going to fill in all the space.
For now, let's get this started.
We're going to remove this one.
Cut stuff in the way
first, like so.
This isn't the
cleanest cut. I could do a lot
better.
Some of these ones
that come off at a weird angle,
you want to cut it not along
this branch, but you want
to cut it crossways across
this. If you see this cut,
it's angled downwards to the branch
a little more than maybe it should be. It should have maybe
come across more like this.
More
straight across like that.
The tree will heal up fine. You want to have it
90 degrees perpendicular to the branch that you're
cutting, not the branch that you're
cutting into.
You obviously never cut into the
actual branch.
I'm going to be looking now
for inward growing
inward growing branches.
I'm going to remove this.
Before you take an action, always
just take a step back
and double
check, do I want to take that action?
I think I do.
That's a lot.
Alright.
Now we're going to
clean up tiny little
branches,
branches growing inward,
growing to the wrong spot.
I'm just going to tidy this one up
and we'll play it on double speed
to speed it up so you can see.
Again, I'm looking at inward growers,
small tiny little branches,
potential future crossing
branches, anything going
too vertical.
I want this tree to get
a little higher like I said, so I'm going to
cut everything a little higher. I really
want it to get up and then out
and then out, kind of like that.
Okay, so I
botched that one.
I cut through and
there's too much vibration in the tree.
I should have got a ladder. I should have braced it better.
The
clippers, the pruners didn't cut right
through. I split some of the tree so
I had to adjust and
instead of trying to keep that
and have that potentially fester and
cause disease in the tree, I just
cut it off a little more than I'd
wanted to. So
if we take a look back and look at the tree,
it's pretty
good. A couple
things I can kind of clean up,
shorten some of these.
Now I could take a few more
off. If I
had done this last year, I'd
take this one back quite a bit more
but for now because I've
removed so much of the tree, I think we'll leave it like that.
If you cut too much off
a tree, it's going to water spread a lot.
It's going to send a lot of verticals up.
It's going to sap a ton of energy out of the tree.
So I'm already pushing
it on how much I prune these ones.
So I think I'm going to leave
it like that and we'll just see how it goes.
Lots of update videos this spring.
You'll get to watch and see how the tree
responds. Watch my
mistakes. I'll learn some.
I'm sure I made a bunch.
We'll see how it goes together.
Keep in touch and
I'll see you next time.
