IKEA HACKS FOR 2019 LIFE CHANGING HACKS

LIVING ROOM MAKEOVER - DIY
84 followers
48 Video Views·Dec 9, 2022
What's up, Rocky family? Welcome back to my channel. So, today's video is a little bit
different because I'm doing Ikea hacks. So, I went to Ikea and I purchased two pieces.
This shelf right here which cost $14.99 and then an end table which cost $8.99 and they're pretty
plain when you purchase them. This was just a metal shelf but I used a certain hack to really
spruce them up and match my home decor which is very farmhouse-like. I had an empty space right
here and I ended up getting this shelf that fit perfectly there. So, I wanted to make it
match the rest of my decor inside of my house as well as my furniture. And what's really cool
about this particular piece, this right here, it's floor samples. Samples. I've only ever done one
other Ikea hack video and in that video it was more of a marble theme. So, this time around I
wanted to stick with the farmhouse decor. If you don't live close to an Ikea, don't worry. These
hacks are not just for Ikea furniture. You can use this on like a regular bookcase you get from
like Walmart or Target or other pieces of furniture that aren't from Ikea. And what's
crazy to me are the wooden looking supplies that I needed for the end table and this
all only cost me under $10. So, I hope you guys enjoyed the video. If you guys want to see another
Ikea hack video, if we can get this one to 5,000 thumbs up, I'll do another Ikea hack video but
with more of a glamorous theme. Like maybe I'll do something that involves a mirror or maybe
marble again but something that's a little bit more glam than just the farmhouse look. Also, if
you're not subscribed to my YouTube channel, make sure you subscribe and hit the bell button so
you're notified every single time that I upload. With that being said, let's begin the tutorial.
Let's start with the metal shelf. So, I got this from Ikea obviously and it was $14.99.
When you set it all up, honestly it's not that hard. Maybe you'll end up bending the metal just a
little bit but it actually comes together more nicely if you're able to bend it a little bit.
I had to cut some of this like short just because my underwear was showing and I didn't realize it.
So yeah, this is not entirely me putting it together. Okay, so the way that I am going to
make this look different is I am going to be using vinyl tiles from the hardware store. You're going
need a razor to cut through them and then I'm also going to be using like this L-shaped ruler as
well as a cutting board. It's just easier to make sure the measurements are just on point with that
cutting board and then the ruler. It's like if I cut through it, it's going to be okay. Now, what
you want to do is you want to measure out your pieces so that they fit your shelf. I had to do
two pieces for every single shelf from the type of vinyl tile that I bought. If you're wondering
what vinyl tile is, basically it's like what people use on the floor. There's a sticky adhesive to the
back of it so you don't have to buy an extra adhesive if you don't want to. What you do is you
take your razor and you cut semi through the tile. You're really not going to be able to cut entirely
through the tile but you just semi get it through and then you bend the tile and it should just snap
right off and if it doesn't snap right off you can go back with your razor, cut a little bit
more through it and for sure it'll snap off the second time. It really isn't hard to do. If I can
do it, I'm positive you can do it. Just cut through it, bend the tile, it should break. If it doesn't break
then just go through it one more time with the razor and again I suggest having a cutting board
on hand just because it makes life so much easier. You don't need one. I've done it before without
one but it just made life so much easier for me. I got my tiles at Lowe's. I recommend going to Lowe's
because they had the biggest selection and at inexpensive prices. I saw it at Home Depot, I saw
it at Menards but it just wasn't the biggest selection and then Lowe's on top of that had more
that you could buy at just one piece where a few of the ones I saw like Home Depot and stuff I had
to buy an entire box. After every piece that you cut I recommend going to your shelf making sure
that it fits properly so you don't go and mess up the second piece. So I had you know my initial
pieces from the vinyl tile that I cut but then I had to take another piece and cut into that height
just to make it fit the shelves properly. It depends on the tile you buy. You might buy a tile that
fits this right off the back and you don't even have to cut through it or you might have to
cut through it like I did. You just got to make sure you're measuring every single time that you
cut a tile. Once you have all your tile pieces cut up you can now stick them directly to your shelf.
Again you can get a different adhesive. Now I decided not to use another adhesive just because
I feel like if I want to change the look of this I can whereas if I used another adhesive to put
on those tiles I wouldn't be able to get them off and I can't remake the shelf until you know a
different color if I wanted to. Now this next part I'm super proud of because I think it looks really
cool. So what I did is I used samples from Lowe's. So it's the flooring samples. I purchased nine of
them. Some places have free samples like Menards. These ones you have to pay 25 cents for and yeah
so I only had to get nine. It wasn't too bad. It was $2.95 and I felt better paying for them just
because I got so much. If they were free I kind of would feel weird taking the entire supply.
So what these floor tiles do is they snap into place. You just have to bend them a bit and you
might see some cracking or hear cracking but that's the way you're going to get it to attach
to each other. If you are having a hard time you can go ahead and use some glue to make sure
they don't go anywhere. Now I attached three for each like shelf area that I ended up decorating.
To attach those samples to the metal I'm using E6000 glue. Now what I did was I put the E6000
glue along the metal trimming in the inside of the shelf. It's hard to describe but you can see
what I'm doing. Then I placed down the sample piece that I attached three to. Now you do need
something to kind of hold it up in place otherwise it wants to fall down. So in this instance I was
just using extra sample pieces to hold it up in place while the glue dried. Then the second row
what I did was I decided to use some hot glue and E6000. So the hot glue kept it in place
while the E6000 dried. The E6000 is going to make sure this stuff doesn't go anywhere.
Hot glue is just going to keep it in place. If you decided to just use hot glue it's going to
fall off on you. And that time around I just placed little Jenga pieces below it and that was
able to hold up the sample pieces. Whatever you do remember to take the sticker off. I forgot to take
the sticker off of those sample pieces. You could use the vinyl tile there as well if you wanted to.
I just really like the look of these sample pieces and that's actually why I ended up getting them.
And I don't know it just looked really really nice to me. You could bring that down all the
way to the bottom of the entire like organizer shelf. It's up to you. You can add more of that
to like the back of the shelf. I just put it on the very front and then I just decorated this thing
and I just think it's so cute. I ended up adding just a loose shelf piece that I got from Menards
at the very top. It was white. At first I was thinking maybe I could use those but they're just
too big. But I really liked putting the white one at the top. It just looks really nice. And that's
it for this Hilas shelf hack. If you want to see the other hack I did I'll link it down below for
you guys. I spray painted it and that time I used contact paper. So now I'm going to show you the
same hack on the Lack end table. This one was $8.99. They do carry one that has like an oak finish to
it. It really looks like you just put contact paper around the entire thing. And that one I
believe is $12.99. So I go ahead and I you know screw it all in. This is me near the Lack. Okay I
don't really even know what I'm doing. But I take the legs out and I screw them in. It's easier just
to slightly screw the screw inside of the table and then just kind of twist the leg on. And as
you're twisting the leg it's going to go into the table at the same time. At first I was struggling
with it. But then once I got the first leg on it was easy to get the other legs on. So with this
table I'm doing the same thing. I am using the vinyl tiles. This time around I have these square
pieces. And what I do is I cut them into four pieces. So one square piece I cut down into four
pieces. And then I just kind of cut into them making different sizes of that rectangular shape.
And the reason I did that is I wanted it to look like there was a bunch of pieces of wood on top
of this. And all you have to do is just figure out what you want to do. I mean if you want to
cover this in four just four separate pieces of tile you can do that. But I just wanted to do a
bunch of little pieces of tile that look like almost like flooring on top of it. Now I made
a mistake. First I just laid it all out before I attached it to the table. And once I had it laid
out the way I wanted it to look I started to attach it. But the mistake I made is I didn't go
with the grain of the wood. Like you want the grain of the wood to be going in the same direction
and I did not do that. And I noticed it after I made the table. Still looks nice to me but if
you're somebody who notices details like that you just want to make sure when you're cutting your
tile that you are cutting it so all of the pieces go with the same grain and just look. Again highly
recommend the cutting board. I had just bought that thing and I'm so happy I bought it because
it made cutting so much easier. Because lots of times even if you're just using a ruler it could
be annoying and you end up cutting everything like at a weird angle. I really really like the cutting
board. So that is it for these two Ikea hacks. All I did was use vinyl tile and some samples
from Lowe's. And each one was so inexpensive to do. For the lack shelf it only cost me four dollars
for the vinyl tile. And it's a little bit different from contact paper. I actually like the way it
looks more. It looks a little bit more realistic than contact paper. Actually a lot more realistic
because contact paper really like when you do wood contact paper doesn't look that realistic.
I hope you guys enjoyed these Ikea hacks. Super super easy to do. I promise you you will not have
a hard time doing it. Thank you so much for watching. If you want to see more Ikea hacks
make sure you give the video a thumbs up and let me know down in the comments below. I probably
will do like a glamorous one next time. Anyways I will see you guys. Take care. Bye.
