3 Simple Inventions and Great Ideas

Welcome to our channel Daprofessor Which is a Hindi channel and in today's video I will teach you how to use a mixer We can make a 12V 5A power supply from the motor Then this is the motor you are seeing First it was the mixer's motor that was faulty I have replaced it with a DC motor What does it say here Attach magnets to the stator winding so you can see them Concave magnets are installed and the place of the stator winding is here She is placed in front So now it's a DC motor and We will check the registration of every call I have set the meter to 200 ohms And now our registration check will be heavy The first coil's resistance is 60 ohms And the resistance of the other coil has been reached Seventy ohms is okay Perhaps there was a mistake in the first one They do it again his also being seventy This is seventy that's correct Then both will be seventy ohms This means the number and turns and the thickness of the wire Both are the same After that now these are the two polls Connect these two in a series In this way the final two wires will come out So now we need to find out where North Pole and South Pole are Then you can see it for yourself This is a 9-volt to 24-volt DC supply 3 amps from the one I bought in Bangor It also has a display Now you can see them doing 9.5 volts The maximum curve goes up to 24 volts It is a Feriable Adapter it is a Noub it is a Display And this is a 3-amp current in it There is a lot of work to be done Now let's take any one of its poles and connect two wires We connect with this supply and then It will become our pole A very strong electromagnet electromagne He is the friend who is like a magnet Then now the supplier's wires They will connect with the strings of Kauli And this became our electromagnet Why should we make this an electromagnet now Because we need to find out as I have already On one wire the positive is connected on the other wire we have Negative connection is made then such a connection is made Which way is the North going inside the pole or the South And if the inner one is becoming a Nord and these are the ones If it's attracting it then the other one There is a pole supply it He should reverse it and these things Keep in mind these two points This wire of the pole with another Connect with each other in the series so tha If we had reversed the connection both would have been affected This will not work if it becomes the same as the other transformer This is copper winding which I have He was lying there and copper is always useful somewhere so I took it Let's take a guess this is a screw nut bolt sorry This is one of our secondary voltages and supplies It will work the nut bolt is okay I have put in many turfs They have been given and the thickness of its coil is also thick and proper So that our current will increase now this is the secondary They slightly insulate it with this black wire We have the insulation tape this is covered with insulation tape Complete and the end point of both wires sandpaper The wires are connected you can see it's already complete Now this secondary coil is the one that is my stator winding Between the two the way you are looking at it the mixer motor They will be our primary coil which will receive a total of 220 volts And the total resistance because both coils are connected in series Because I just measured the resistance of a coil and showed you that it was 70 ohms And these are both black and gray wires you can see them These two will be connected to your 220-volt supply And after doing so The nut and bolt in the middle of us around which I have wrapped the high tension wire He's a bolt of something that started to come out The one to be metered from the multi-meter's hall But before that let's measure and check the resistance of this new coil winding You can see the resistance is about 3 ohms Then we will connect both wires of the multi-meter Because we have a transformer and we have not connected a rectifier or diode our AC will come out Then we will supply it now let's see how it works This small pin is a 220-volt supply which I am pointing out and once it is turned on both coils will reach 220 volts And that same 220-volt supply will create a magnetic field which will induce a high voltage in the middle coil and you can see that it has already started producing 13.7 volts AC So our test is done the supply is working now we need to see how much current is coming out and what can be done with it so first comes the 12-volt car bulb so I'll connect the two wires for you like this No as you can see I have made the connection and this supply is on and it's very good So these supplies are working very well for us friends and even a bigger size is available for your starter winding the mixer motor it will work now let's take a slightly bigger bulb I have another bulb here as well The ammeter that is in the car's headlight you can see it is the headlight bulb Let's connect it and see if it's working then we'll know What power are the supplies made of The first wire is connected friends Now the second wire You can see it has burned this one too It's working so well this transformer And not a single penny in it It wasn't necessary to buy anything because everything we needed was already at home It was useless not working and she wanted it back I have used it So you can guess that nothing is really useless from this bass Just understand and then leave Give me an idea or just take a look How could this work It's not just used for that there are many more uses ahead The stories I will share with you in many upcoming videos So why did you just take out the AC from your volt And we usually need DC supply When our output is 24 volts Then we will use this KBPC3510 bridge rectifier In 3510 the code is 35 friends for current There's no need for such a big rectifier in this But I only have this available so we'll connect it Now it has a two-wire and four-wire system Two of them are AC and two are DC A little attention is required here You can see how big it is in this way Our motor is running When five volts five amps And the bulb of Bara Wald is in it It was burned very thoroughly and in a proper way Then it's 24 volts Good performance without any difficulty It's easy to get along with friends The voltage I have provided is set My 24-volt motor I gave it a 24-volt battery Now these friends that you are seeing You have seen it before It is my car This is also 24 volts Then I will just give the supply of Bara Wald again Because this transformation of the supply I have made is of the Bara Volde Now show the demonstratio Let's show the purpose Then it will go a bit slowly But you will understand that it is working The only purpose is this They do it like this You can see that our motor has already started I'm trying to figure it out But it's giving a good turn This is a 12-volt ZO Transformer Its efficiency also There is nothing special about Narumal Transvormer Good efficiency will be achieved Because the core used here is exactly like a transformer's core This is a 12V 7A UPS battery Because our transformer is providing a supply of about 13 7V And I have installed a rectifier that converts AC to DC Then connect its output terminals to this battery And once we turn it on the battery will start charging Now I will apply the solution and you will see the voltage increasing It's 12:47 it's 46 and I've turned it on So it's now 13.86 13.88 how fast you can see The voltage is increasing our battery is charging This indicates that the power supply is this method It's very good and can be used in many tasks so we hope Hey friends I hope you liked the video If it was good please like it Subscribe to the channel and we'll meet in the next video and the bull icon Please don't forget to like this video or else YouTube won't show it to you It won't show my video no matter how good a video I upload