Heat and Glo FDN-5 BAY Fireplace Review

HansonCarlen
46 followers
6 Video Views·Dec 8, 2022
Hi, this is David with Hanson Carlin Architecture and Construction,
and today we're going to talk about a quick review of the Heat and Glow Foundation
Bay 5 fireplace. We just saw it turn on there. This is Toby, and Toby did the installation of it.
Toby, tell me about this thing and how you put it in and a little bit about it.
It was pretty straightforward putting it in. I think the biggest thing was our clearances to
make sure all the clearances were good to go. It's kind of a freestanding unit,
so the biggest thing is just making sure everything goes in according to plan.
Yeah, this was something we had never done before. This was the first time on this.
What was weird about this was this thing comes in two pieces. You'd call it a hood,
wouldn't you? Over the top, and then how did you hold that hood up?
So that was one interesting thing about it. It's actually not sitting on the floor.
It's hanging from the ceiling, so the whole unit literally just comes down,
and then it's hung from the ceiling. On what?
Threaded rock. And you can adjust that up?
So it's adjustable. You can go left and right, forward, back. It just barely rests on the floor.
It's really got a cool look to it. Where were those lights coming from? Were they
down under the glass? It's crushed glass in the bottom in there,
and then there's LED light strips that go all the way around the flame.
Then the nice long flame bar there. It's a wonderful look. It's a beautiful fireplace,
so super happy with the product itself, too. Did you notice that there's two sets of glass
down there? What do you think about it? It makes sense to have a little bit of
insulation in there. Obviously, that glass is going to get hot. No matter how much
glue you have going through it, it's going to get hot. But having that insulation in there,
you should be able to still walk up to it and touch that glass and not worry about it being
too hot. It just gives you a little damper. It didn't come with this part. This is something
we added on. Behind here, what is this? Is this like a big metal thing coming up here?
No. It's a low clearance fireplace, so there's only six inches clearance here. We built a box
around it, keeping our clearances in mind. The cabinet guys, they did such a wonderful job
wrapping it with the oak to make everything look all nice and finished. Did this come with it?
No. Metal's all custom. We just had our granite guys finishing this up yesterday.
The guys from Cold Form did a great job with it. You can see the way that's mitered.
This was another interesting thing. A lot of times, the granite guys won't
miter this front edge. This is actually mitered so that this comes up and this comes out. You
don't even see that edge there. This is two pieces. I can't see that at all, even looking
at it close. This here is something that you put on too then, Toby, this stone underneath.
Bring the outside in. These patio doors here, there's the rock outside. It just brings the
outside in where this is such a good inside-outside space. Do you know, can this unit be
installed where it's vented out the back? I don't think so. I don't believe so. I believe this one
needed to go vent through the roof. It does have a powered vent. Meaning what? The vent up on the
roof is powered. It has a fan inside of it that will suck all of this, I guess you would say,
heat. The CO2 and all that to keep everything nice and safe inside. What I'm really impressed
about this is sometimes fireplaces have a lot of blue to them. This hardly has no blue. I don't
know why. It really looks great. We're going to take a look at the basement because there's a
weird thing about this too. This was a normal fireplace. It was maybe a day install, but this
was like three days, maybe a week. Maybe close to two weeks, probably. Like we said, this is the
first time we've done one like this. I guess it goes without saying, a unit like this is
three, four, five times the cost of a standard unit. What we're doing here is we're going to
put a finish stick in here to finish this off. We're going to get that installed there. I think
this is going to be one of the nicer fireplaces we've ever done. Talk about that fireplace more.
What's this thing here? We boxed this out. This is all just framing, drywall over top.
The reason it's here is because inside we have our intake air for that fireplace, which is
directly above us right here. This will go into the bottom of that fireplace, come along all the
way out here. Then because we have a concrete deck on the other side, we had to come all the way over
here to get fresh outside air to it. I want to say 10-inch pipe? It was big. Yeah, big. It's a
big unit. 10-inch pipe comes around, goes behind our box here, and that's where we get our intake
air for it. Did you use a hard pipe or flex pipe or what did you use? Hard pipe on this one. All
hard pipe, sealed hard pipe. Everything it gets will be outside air. It won't suck any air from
the house. Keeping everything inside, inside, and outside, outside. Yeah, and maybe that's how why
that flame is so pretty is because it gets all of that air from both sucking and pushing and it
makes that so yellow and pretty. But anyway, I would say what would you on a one to five
give that fireplace there? We're kind of giving it a review today. I think it's gorgeous.
It's a five fireplace. Yeah, probably the install is probably like a two though. It wasn't horrible.
It wasn't horrible. I mean, you know, we take our time and make sure it's done right and
as long as it's done right, if you do it once, it's not so bad. Yeah, the problem is, you know,
when you do something once like it's 10 years between them and it's like, oh, I don't live
near that. Anyway, so we would give a thumbs up to the Heat and Glow Bay 5 fireplace and
we'll see you next time. Thank you.
