The Trick to Printing on Fabric WITHOUT a Cricut

Welcome to the Woods (Melissa Woods)
160 followers
4 Video Views·Dec 7, 2022
Hey guys it's Melissa from Welcome to the Woods. Today I'm going to be showing you how to make a
stencil to print on fabric without a die cut machine. I'm using freezer paper. Now you want
to make sure that you're drawing your stencil on the side that is not waxy, not shiny. I made my
design on the free graphic design website canva.com and you'll see that I'm just going to hold my
freezer paper up to the laptop and as I can see through the paper from the screen I'm just
tracing with a pen. You don't want to go with a design that's way too complicated because it's
going to be hard for you to cut it out and my design included some really skinny lettering
and I would stay away from that if I were you. It was pretty difficult. Another tip is to not
press down hard on your laptop screen at all. You can just hold the paper lightly as you trace with
your pen lightly. I did have to move my laptop around a little bit to get the really good
lighting so that I could make lines that were clear and see through my freezer paper well.
Now that I have my design made it's time to cut it out. I'm using an exacto knife and I'm just
following the lines very carefully holding against the edges of the freezer paper so that nothing
rips. You're going to want to really take your time with this. I know that obviously a die cut
machine like a Cricut or something would make this process so much easier and if you have a
Cricut you can use this freezer paper hack if you want to print onto fabric. But I don't have
one of those expensive machines and that's okay with me because I don't do projects like this
super frequently. However you can see the usefulness of a project like this. You can
hand make or hand design napkins, artwork, clothing, really anything. The possibilities
are totally endless. So if you like this idea please click share on this video. I would really
appreciate it. Every single share tells me you want to see more crafts and DIY from Welcome to
the Woods. I'm going to be using my handmade freezer paper stencil on a hat and so I cut it
out just kind of a little bit neater you know around the design and I'm going to be ironing
on the freezer paper. The freezer paper will stick to my fabric because the wax layer will slightly
melt into whatever I'm ironing it to. Now because my cap was curved I could only do like one half
of the stencil at a time in order to make sure that all the edges of every letter was adhered
properly. But basically once I did that I just grabbed my So Soft fabric paint from DecoArt
and filled in each letter with white. Peeling off the stencil is always so fun. How do you guys think
I did? I'd love for you to leave me a comment and let me know what you thought of this project.
Remember for the little pieces that get stuck be sure to use your exacto knife or like a pinch
some type of sharp little point to pull those up so you don't smear your paint.
Thank you all so much for watching. Follow my page to see more from Welcome to the Woods.
