DIY ACCENT WALL __ MODERN ACCENT WALL

LIVING ROOM MAKEOVER - DIY
84 followers
47 Video Views·Dec 6, 2022
Why, hello there. Brent here with Bring Your Own Tools on today's episode. If you want to see how
we completely transformed this ordinary looking wall with just some trim and some paint, keep on
watching. Let's get started. For this project, this is what we're working with, a recessed area right
next to the front door. And yeah, it's a huge opportunity with making it a unique space versus
just another wall. Now, the first step of this project is one of the funnest because you get
to design and lay out the space exactly the way you want. I'm using a piece of the trim in order
to do so, which makes it a little bit easier to lay out the entire arrangement. I then take my
speed square and my contractor framing square and start aligning the first segment that's going to
be basically breaking up this large wall into two sections. Now, the beauty about this modern
accent wall is that you can be extremely creative and depending on your style and how much trim you
actually want to use on this project, you can do an extreme amount of trim on this wall or you can
leave it a little bit more bare in some sections but add more to others. The possibility arrangement
is endless and just know that this space is approximately 9 feet tall by 14 feet long.
Now, for my wall, I'm going to be installing a picture frame wall system, which basically
encapsulates this entire trim layout. And at this point, if you're trying to figure out exactly how
much material you need to use on a project like this, just note that I took the square footage
of this space and accounted for a 20% waste factor because I know there's gonna be plenty
of unique angles on this space. I grab my trusty stud finder and account for exactly where each
stud is located because with this large trim, I want to make sure we're nailing as many studs as
possible. And as for nailing, I have my small Porter Cable air compactor with brad nailer and
the nails I'm using are 2 inches long. That will account for the thickness of the trim, the drywall,
and then sinking it into the studs. I get my chop saw set up and ready to go and if you can,
try and get it off the ground because you're going to be going back and forth with plenty
of cuts on this project and you want to make the cutting process easier on yourself because the
more time you save here on every single cut means the sooner you get to enjoy this beautiful accent
wall. Or at least save a little wear and tear on your knees, right? Now I'm squaring off the corners
of this frame because I'm going to be putting over all the holes and lines and the nice thing about
taking the time to figure out exactly where your studs are from the very beginning makes quick work
of accounting for where you need to place your nails right away. On my project and on most
projects you're probably going to have a span that is too long for one piece to account for
so you have to splice two pieces together and the best way to do this is to take your chop saw and
actually cut a 45 degree angle and fit it in to itself. That will give you a very strong hold
as well as it makes it easier for a seamless look later on once we putty that seam. In very tight
knit corners, because the drywall is a bit rounded, remember you can always remove a bit of the MDF
trim off of the corner and that way your trim will fit nice and snugly against the wall itself.
One tool that's not necessary on this project but it's nice to have is this simple and cheap
angle finder and it just assures me that I have the right angle set for my chop saw
and in all honesty I should have used this one instead of my speed square earlier
because the angle itself is actually closer to 46 degrees on this middle section but easy
adjustment on my table saw I just wanted to make sure I had that account for beforehand. As for the
trim that we're using for this project I decided to use one by two MDF trim that's 10 feet long.
Now that is the nominal dimension and the actual realistic dimension is closer to
one and a half inches wide by half inch thick which I thought might be on the small scale
but after it's all said and done it looked gorgeous and I'm super happy with the size.
But let me know in the comments what you think personally. I also decided to go with MDF trim
versus actual real wood mainly because real wood has a tendency to bow and bend and warp. MDF almost
guarantees me that I have a very straight piece of trim that I won't have to worry about trying
to maneuver in place because it's perfectly straight already. At a certain point I did
smart up and realized it's a lot easier just to make a mark on the piece of wood instead of trying
to push my tape measure all the way up against where I need it and therefore making that exact
measurement that way was a lot easier to do than trying to use my tape measure in the long run.
Just keep that in mind on your project. At a certain point you will have to come to the
realization that you can't hit a stud every single time and with that I actually use a bit of CA glue
with an accelerator. That way I can drip it on the back side of the MDF, apply a bit of the
accelerator, hold it down for a couple seconds and guess what that piece of trim is not going
anywhere. In order to provide this wall with a fully professional look I highly suggest applying
a bit of caulk to all of the edges that butt up against the drywall. This does add a bit of extra
time to this project but it's well worth it because it truly gives it a much more professional look and
feel because all those small tiny crevices between the trim and the drywall are completely sealed up
and once it's painted it looks extremely sharp. But now that we have the edges cleaned up we have
to take care of all those nail holes as well as transitional periods. That's why I'm using this
patch and paint product from DAP. Now a couple really nice things about this patch and paint
product is the fact that one it dries within 30 minutes, two it's non-shrinkable, three it's
sandable and four you don't have to pre-prime it before you apply your finished paint. You can
apply your finished paint right on top of it and it won't make a difference in the finish. Very nice.
I apply the spackle to all the nail holes all of the intersecting trim layouts as well as the
crevice that butts up against the trim compared to the adjacent wall. I just want a flush clean
corner on this pitch frame layout and no you don't have to do that but guess what it's all in the
detail. Once the spackle is fully cleaned up I take my random orbital sander with 320 grit
sandpaper and just remove all of the excess material. This is extremely easy and quite
satisfying because you have a perfectly smooth finish in the end and the theory in this is that
you don't have any seams seen once you actually apply your finished paint. And as always if you
are interested in purchasing any of these tools or products seen in this video I will leave links
in the description box below. Okay we have all of our trim ready to go. It's caulked, it's filled,
it's sanded, we've taped off everything. Now let's start painting. For this project we're using a flat
finish Regal Select by Benjamin Moore paint. Now this is quite a thick paint as you can see here
but it really complements the space and gives it a feel of depth and contrast compared to the rest
of the walls. Keep that in mind especially with accent walls. Now with this project we are going
to be using our Wagner Flexio 3000 sprayer which worked out perfectly for my last project because
that was how to paint cabinets. I've added five to ten percent of water to the mix in order to
thin it out properly and the only difference here is that we're actually using the larger spray
nozzle versus the fine finish spray nozzle that we used in our last video. This larger spray nozzle
really provides a nice thick coat of paint but it's not too thick. It goes on extremely smooth
and very well without any drips and I didn't have to use a single paintbrush for this entire wall
which is really really nice. Even if this is latex paint you still want to use a respirator
especially when you're in an enclosed environment like this so just keep that in mind when you're
spraying. Because there's so many unique angles and variances within the space I really did save
a lot of time and energy by spraying it versus a traditional paintbrush and roller and therefore
to paint this entire space with one coat took me only approximately 20 minutes to do which is
amazing. I let the first coat dry and then came back and applied a second more lighter coat than
the first. Now the second coat really doesn't have to be very thick I just want to make sure
I'm building up those barriers of paint and therefore the paint itself will be more durable
during the longevity of its lifespan. One of the key factors at this point is that once you're done
with the second coat and you're not proceeding to a third or fourth you should proceed to removing
all of your tape and miscellaneous protection around the space. I like to remove it when it's
a little bit damp before it's fully dried because I feel it's a little bit easier to break off those
edges cleanly and consistently all the way down your wall. You certainly can wait for the entire
wall to be fully dried before removing all of your protection but personally this is how I'm doing it
on this project. But one of the best parts about this project is that it's quick easy cleanup and
all we have to do is reinstall our outlet cover plates and we are done. The incredible transformation
of this entire space really culminates with a accent wall like this. It's bold, it's unique,
it's different and the moment you walk into the space it really transforms the feel of this room.
You gotta love a project that only takes a day to do like this
and one that I am truly proud to say is one beautiful sexy beast. Oh yeah!
