DIY BUDGET FIREPLACE MAKEOVER 2020 _ Living Room Makeover Part 1

LIVING ROOM MAKEOVER - DIY
84 followers
4 Video Views·Dec 6, 2022
Alright guys, today we are doing a DIY fireplace makeover because as usual we are on a budget.
This was originally going to be one big video but I decided to split this up. This is part
one of my living room makeover so I'm starting off the room here. This is something I've wanted
to do since we moved into our house. Before we jump in, go ahead and hit the like button and if
you want to catch the full reveal, the full makeover of the living room video, make sure
you hit subscribe so you don't miss that coming up in the next couple weeks. As always starting
here with the demo day and the cleanup of the room, trying to get everything out of the way. Of
course wear my comfy sweatpants because who doesn't demo in sweatpants. Here's our little
blank slate that we've got going on. First up I need to cut all the previous caulking that they
had around the side to loosen it up as much as possible and not rip the entire wall off when I
pull this thing off the wall. Honestly with this whole project I was just kind of winging it. I had
a basic idea based on some Pinterest searches what I was going for but I started with taking
apart these front pieces to see if I could maybe save part of the mantle that was up there by
sanding it down, repainting it, and just giving it a more modern look on the front. Once I got into it
I realized the mantle top was not attached the way that I thought it was and I kind of ended up
going with, you'll see later, just taking everything off. There she goes. I've never taken apart a fireplace
before. That's fun. Here I am still spending the time taking bits apart to see if I could potentially
reuse this top part and like I said ended up going a different direction. I do feel like I wasted a
little bit of my time going through it the way that I did but I had no idea what was going to
be under there. Everything's coming off so easily. How easily would this come off? This marble here.
Never done anything with marble before. Just worried that the marble won't be as easy to come
off as we think it is and will cause some major damage to the wall. So as you can see that marble
ended up being there. Wasn't expecting it to stick out the way that it did. That's why I ended up
going with the recovering the sides approach. Here we are unloading all the lumber from the car.
Everything that I got from this project was from Home Depot. I'll link it below if I can. It all
totals up to around $120. That's including the mantle, the shiplap, and everything that went
into this. One way that you could save is by not going with actual tongue and groove shiplap and
just using 1x6s and spacing them out yourself. So here I am rebuilding the sides of the fireplace
by using some 1x8 boards and nailing them in there with my nail gun. And you will see here is when I
was trying to figure out what I wanted to do on the top piece. I wanted to use this 1x8 but I
thought it would look kind of weird going from the 1x8 up to the mantle and it would just be too much.
I ended up finding this skinny piece of 1x2 that worked perfectly, nailed that in there, and decided
to shiplap all the way up from there. I'm really glad that I went with this. I thought it was a lot
cleaner look and less bulky. For the top part of the fireplace, I went with a 1x4 on each side to
trim out the shiplap. It's totally up to you which way you want to go about it, but I thought it would
be easier for myself if I put the 1x4s up first and then measured the inside for my cuts.
This is the moment I've been waiting for all day. The first piece of shiplap. I hope it fits.
I'm like so severely wrong. What did I do? I measured it twice. I measured it two times.
Where's my measuring tape? It's going in. Yes. That's beautiful. I'm so freaking excited. Okay,
I'm gonna mark where the studs are before I put a piece under this. Once you get the cut right,
these are actually really easy to put up. I just used my nail gun and some two-inch nails
to put them all in. After these first couple boards, I pretty much was rolling on it.
It was actually really fun to do and satisfying. I love clicking the little planks into place. This
is shiplap that I've never used before. That's why I was so excited. I've always wanted to shiplap
something myself and I finally accomplished that. Day two living room slash fireplace makeover.
Surprisingly, only my second trip to the hardware store. I'm about to head back to Home Depot right
now because I needed one more shiplap board. This one's going to be tricky because we have to cut
the whole length of it to make it fit in the top section. It's just a little bit too big
to fit perfectly flush with the ceiling, which I didn't expect it to do anyway. We don't have
table saw, so I'll have to use our circular saw. I had enough boards. I grabbed one extra board
just in case and I ended up using that extra board because I wasn't planning on shiplapping
from the very top of the fireplace. I ended up not using the eight-inch header, so we used more
shiplap and that is why I don't have enough shiplap. Got it. That was pretty quick for you
guys. One thing I wanted to know about this shiplap, if you're going to use it, I got it from
Home Depot. I really like it because it's the tongue in the groove that makes it really easy
for the spacing when they go together because everything's automatically figured out for you.
I wanted to give you guys a little note. Make sure you're looking through the stacks there
because a lot of them are damaged or broken in places that you would see on the front
or they just had some crazy paint situation happening. Make sure you're digging and
checking out the ones before you just grab a stack of them. Also, it took me a minute to
realize this yesterday, probably two or three boards, but the boards themselves are not a
straight cut on the end. Some of them were cut like slanted or just not cut very well at all,
so I would have to start by cutting off an end and then making my actual cut. Make sure you're
looking at that. But yeah, these are one by six inch by eight foot boards and I'm using,
this will be 13, I need 13 of them. If you cannot get a perfect cut for your top piece,
I found that adding a quarter inch round hides pretty much all imperfections and was really easy
to do. Time to sand, prime, caulk, paint, and then she's done. Oh wait, the mantle. Dang it,
the mantle. I think it was during this that my girls started getting a little bit crazy. So,
the true MVPs of this project, my parents, were watching my girls so I could finish this up.
So, like I said, I caulked everything. I filled in all of the little holes with my wood filler
at first and then I realized it was actually really hard to squeeze. So, I switched over to
my pink filler that I have that turns white when it dries. Once everything was done drying,
I went back through everything to give it a smooth sanding, make it as smooth as possible.
While that was drying though, I went out and started to build my mantle. As always,
feel free to leave any questions that you have about this project down in the comments and I
will hopefully be able to answer any of them. But for here, I didn't record all that much of
the mantle building. To build this, I used two 1x8s and one 1x4. The side pieces are the 1x4
and the top and the bottom are the 1x8s. I also slid a little piece there in the middle to give
it some support and here's the piece that I built to slide that floating mantle onto. To build that
little brace, I used a piece that was already existing from the previous mantle and I screwed
my own pieces into that. They're little 1x2s and then all of that was attached to the stud on the
so that I know this can hold up the mantle. Staining time! These are the two stains I picked
up from Home Depot, Early American and Classic Gray. Again, I'll link them down below. I was
really excited about the color of this mantle because it was going to be the main thing bringing
warmth over to this corner and I knew the color would contrast really well with the black and
white. I was really excited. Here was a little test board that I did to see what the colors
would look like. To apply it, I used a foam brush and then I wiped all the excess off with a clean
rag. Okay, so here we have the mantle and this little bookshelf that we have going in the room.
Right now, I'm kind of trying to stain them similar colors. I'm going to try and add the
gray now to the mantle to see if I can get it even closer to this one, but they're not too
far apart. This is what the color looked like after I combined those two and I think it matched
up pretty well. They're both going to be kind of in the same corner so I didn't want them to clash
too much. Anyway, here I am moving on to painting. I'm priming all of the boards that are the pine
boards with the knots on them because I've learned that knots can show through white pretty easily,
so I'm using my 123 primer that I'll have down below in my Amazon shop. The shiplap came pre-primed
but I ended up going over it and everything in this area with the same white that I used on
our kitchen cabinets, the Sherwin-Williams. Pretty much just basic white with no color added into it.
At the end of this video, I will show you the very, very before picture of the fireplace because I've
actually painted it a couple times. This black paint is something that I added over top of what
was an interesting green marble. It's a little early but I'm too excited to not do this. Hey,
there you guys are. Look at you. Look how beautiful you look today. Above the mantle, I knew exactly
what I wanted to put there, a black round mirror, and this is one that I got from Target,
which I'll link. I think it was Project 62. It is what ties the whole space together. I
love the roundness. I don't know what it is. It makes everything look so crisp and clean.
You know I did not get it right on the first time. I had to step back, look at it, and
wanted it a little bit higher, so this I just nailed into the shiplap and hung up. Yeah,
that's so much better. Here it is, guys. Honestly, I am still shocked that this is something that I
built on my own. I am in love with how it turned out, though. It's so modern. It's so good. I had
you guys vote on my rug over on Instagram. Remember, this is only part one of the living room.
Here are a few peeks of the little elements going into it. Subscribe so that you do not miss the
full makeover. Comment down below. Let me know how you guys think I did. Like this video. It
helps my channel out so much. I will see you soon for part two, and as always, happy cleaning.
