How to Make a Violin at Home Pt.2: Wood Choices - the ULTIMATE GUIDE FOR NON WOODWORKERS

Mekwok Studio
75 followers
28 Video Views·Dec 4, 2022
How to Make a Violin at Home Pt.2: Wood Choices for Your Violin
Wood Store: https://www.tonewoodforviolin.com/
Welcome to part 2 of everything else you need to know before starting making a violin at home
with a little or no working experience and bare minimum resources, mostly by hand, from scratch,
for real. If you haven't watched it yet, there is a part 1 of this tutorial where I talk about
all the tools you need for making a violin, and there is a more cinematic video where I
showed you the entire build without saying a word. Make sure you've checked them out too.
And in this video, I'm going to talk about the wood choices, what to look for,
where to buy, as well as the timbre dimensions and the accessories you need for making a violin.
So, enough talk, let's get started.
You probably know it already that the woods we use for instrument making are called tonewood.
They have specific sonic properties vary from one species to the other.
In most cases, the top of the violin is made out of spruce, the ribs, the back,
and the scroll are made out of maple, and there are not many alternatives you can choose from.
This line going along the violin body here, which we call the purfling, is usually made of two strips of
pear wood that are stained black and with a poplar strip in the middle.
In modern settings, the nut, the saddle, and the fingerboard are usually made of ebony,
but makers in the old days often used maple for the fingerboard and put just a thin piece of
ebony on top of it, and they sometimes would decorate it with ivory or some other materials.
And note that ebony is an endangered species, I don't want to misguide you here,
but you may also want to try out other kinds of woods such as rosewood,
or even sauna wood or some other synthetic fingerboard to save the environment.
Generally speaking, grain orientation is the first thing you need to care about when looking for
woods for your instrument, or you can think of it as how the wood is being cut.
The highest quality violin woods are sold split rather than saw,
but those woods are difficult to find nowadays and are expensive as they only work well with
large trees. So for us, quarter sawn is the best choice. Perfectly quartered wood has grain lines
at the perfect square to the surface, this is what gives the top its appearance of long and
straight lines of grain from one end to the other. And speaking of grain, stretched lines of grains
are desirable for appearance in the top and stability in the back, but it may be contrary
to what you've heard before that fine grain is however not a characteristic of the tops of the
best violins. Most of the classical makers use sprues of medium to wide grain spacing,
as fine grain wood is usually heavier because it is denser and excess weight is definitely
a big no-no. Maple in all violins on the other hand is often extremely fine grain,
but such wood is nearly impossible to obtain nowadays just like the split wood.
And lucky for us, it does not appear that grain width is an important tonal factor in maple,
but if I can choose whatever I like with all the things being equal, I pick the finer grain example
because it just look better. And if you want one true ultimate answer to look for the best wood
in the universe, older woods really gives the magic. But of course we can't blame the performance
of the best violins on their simply being old as there are more than enough old and bad violins
to disprove that idea. So if this is your first few attempts, I would rather save the old ones
for later. Personally, I recommend something well-dried, age more than 3 to 5 years and
relatively plain wood to start with because working it well demands a much lower skill level
so there is less chance of making mistakes. The pattern you can see on the piece of maple
here is called flamed or faker. Highly flamed ribs are very difficult to bend as they break
easily on the curves while highly faker backs and scrolls are more difficult to carve because
with faker wood, by necessity, much of the work is against the grain. And many classical period
violin makers use very plain wood at times and even the best of those makers usually make the
neck and the scroll from relatively plain stock that was sometimes even nearly 3 of faker.
Since unlike the back, the scroll required carving in all sorts of direction and because of the shape
you often cannot choose the best direction and angle for carving with the fewest problem.
Also, I would avoid knocks, mineral streaks, sag pockets, and spouting which is plaque marks from
fungus, deep water marks, and mold. Or have them where I know they won't cause a problem.
And something worth mentioning here is that there are actually many great and important
and now expensive Italian violins have almost everything I've just mentioned. But none of these
so-called defective woods that would today be immediately rejected by modern makers
seems has a bit to do with or should I say go against the tone and structural stability.
And with regard to the tapping of pieces, Robert Band, one of the founders of the famous violin
shop Band & Fushi, once commented that it is very sedutive to believe that the pieces of a musical
instrument should themselves have a musical sound. But there is absolutely no concrete evidence that
it makes any difference whatsoever. There are a lot of superstition and black magic in the
violin making world that can really blur your vision. Things like you must have some kind of
spiritual energy, mostly inborn, in order to put the sound poles into the right place. Or even putting
some strange metallic plate on the violin that said it would resequence the neutrons and protons
around the space of your violin to make the violin sounds better. All with the logic being that
a non-secret or simple method obviously cannot give special results. And tapping of pieces is
one of them. Also what I would ask is, what specific thing are they actually looking for
from the tapping? And if Stradivari didn't even care about knocks and sag pockets, why would he
care about the tapping? My sifu Michael Darnton always remind me that don't be seduced into
believing that ideas which sound good are therefore good. Instead, get some experience
and test those ideas for yourself. You can go check out tonewoodforviolin.com to see if there
are anything you like. And you should also go check out on eBay or some other methods such
as the Lumberyard that you may know. Genuinely, wood is priced according to the seller's perception
of its quality, which is a good start, but not totally reliable. Most good quality violin wood
comes from Germany and the southern parts of Eastern Europe. They are available from many
sources and can be expensive. And there are always persistent rumors that some European
wood comes originally from the US and Canada. I can't tell you a specific way to tell the difference,
but instead, I recommend you to find a source of wood that does the job for you and stick with it.
And when you find something you like, buy as much as you can afford as it may not be there
next time you're shopping. And here's what you need. You will need a piece of spruce for the top,
a piece of maple for the back. Most violin body woods came with a trapezoid shape. They should
be around 400mm long and 120mm wide. For the thickness, one side of it should be at least
42mm, while the other side should be around 24mm. But we will then cut it into half to do
some sort of book matching. So that makes it into two pieces of maple or spruce that are 20mm
thick on one side and 11mm on the other side. Try to find some that have
already been rip cut in the middle so you don't have to do it yourself and that would really
save you some time and energy. But anyway, I will walk you through how to do a rip cut later,
so don't worry if you cannot find any pre-cuts. And if you can only get something rectangular,
simply get two pieces of maple with 20mm thick and you'll be just fine. If you are doing a
one piece back, the maple has to be 400mm long, 240mm wide, and 20mm thick. And of course,
larger pieces will cost you more. And just between you and me, I actually like two pieces back much
more as it is more stable and also many of the greatest violins of all time such as the Messiah,
the Titian, and the Canonet are all of two pieces back. And you'll need some thin pieces of maple
for the rips. Here are the lengths for the bounds and make sure they are wider than 32mm and thicker
than 1mm. Some shops may sell them with the back together and some skillful people would do another
rip cut on the side of the maple for the back to get the rips. You can do that too if you want to
And you'll need a relatively smaller piece of maple for the scroll that has to be at least
300mm long, 80mm wide, and 50mm thick. And if you can find a nice piece of maple that is large
enough, there are chances that you can make two scrolls out of it. And we will need some more
sprues to make six little blocks, a thin and long bass bar, and 12 pieces of linings. It is very
important that the material for the blocks are all taller than 32mm and make sure the bass bar
and the linings are long and thick and tall enough. Some shops will give you all this as a pack but
if they don't, I would get a bigger piece of sprues, one that for a viola for instance, and use it to
make my top, blocks, bass bar, and linings. Or just simply buy one more piece of sprues for all these
interior materials. And if you're planning to do this, make sure this second one has no pre-cuts
in the middle so you really have enough material to work on. And this piece of material should be
more than enough for at least three violins. And don't forget to get the material for the fingerboard,
the nut, the saddle, and the purflings. For this, I recommend you to buy some semi-finished ones and
refine them because good quality ebony are very hard to cut and can dull your tools very quickly.
And purflings are kind of tricky for beginners to make. If you want to buy a raw piece of ebony
and make the fingerboard, nut, and saddle all by yourself, make sure there are no brown and white
color in your ebony. Good quality ones should be in all black. And if you feel very lost in this
rhyme of numbers and measurements, just go buy some sets from a tool store and you should not
need to care about any of this. You can also screenshot all these measurements for future
reference and I will walk you through all this in detail again in the step-by-step guide tutorial.
So don't worry, just get something that is big enough or bigger than enough, then you'll be fine.
For the accessories, you will need to buy a set of pegs, a tailpiece and some fine tuners
or a tailpiece with built-in fine tuners, a tailgut, a chain rest, a bridge, a stick of sound posts,
an end button, and some strings. And also a solder rest if you don't have it yet.
You can easily find them on Amazon or eBay and maybe also from your local music stores.
They can be made of various kind of wood. Different types of wood will produce different
quality of sound. If you have no idea what to have, just look for something that is pretty
and make sure they are made of real wood as some really cheap ones can be made of plastic. I'll
find something that I think is suitable and put the link in the description below so you can check
them out too. And also, I would buy more than one set of pegs with the same style and more than
one piece of bridge for a second or third or fourth chance, you know. In the end, you will
get to choose whatever wood you want depending on your budget, taste and experience as you will
gradually develop your own preference for these things. I know it would be a bit overwhelming
when looking for the best wood in the universe as there are a lot of scientific studies and
urban legends on the measurable qualities of wood but virtually none having to deal with which
qualities really make the best violins. Some makers choose pieces that rain, some want a specific type
of rain and some want wood that doesn't rain at all, some want hard grain lines in their sprues
and some are very particular with grain width, runout and quartering while some makers don't
care about any of this at all and use whatever wood that's in front of them. Just be mindful
that while Stradivari probably was concerned with wood density, he most likely had no way to
calculate to the three decimal point degree that seems so important to modern makers. It is difficult
to say which qualities have the most material effect on tone because everything matters and
wood choices is only one of the many elements that make a violin a violin and you'll understand it
along the way. So I say don't get too hung up on which frequency matches which density in order to
make which kind of geometric moving sound on your wood until you really have some experience in
using it. Instead start with some nice but not excessively decorative wood and move on to making
the violin.
