Kreg Jig System vs Kreg Jig Mini | This or That DIY | How to Use a Kreg Jig

Welcome to the Woods (Melissa Woods)
160 followers
6 Video Views·Dec 4, 2022
Hey, welcome to the woods fans. Welcome back for another this or that DIY. I'm Melissa and today
we're going to be talking about the Kreg jig. I have the K4 versus the Kreg jig mini. So in short,
a Kreg jig is a tool that allows you to drill screws at a 45 degree angle by making pocket
holes that you then sink your screws into. And the whole Kreg company has tons of innovative tools,
but the Kreg jig is probably their most amazing because it allowed woodworkers to do something
that wasn't easily done before. We're going to start with the mini. This little guy is super
versatile, small, easy to store, but still has all the great features like the steel inset that
makes it very, very durable. And it even has this feature, sorry, this feature right here,
which allows you to sink in the plug. So Kreg, a lot of times you'll use a wood plug for the big
pocket hole that you drilled and Kreg sells wood plugs for those holes. This allows you to seat
those nicely. The advantage to the mini is that you can put it on a variety of different work
pieces. So it's especially helpful for very long boards that wouldn't easily be clamped down or
put into the K4, K5 clamp systems. And so you need to just measure out your spacing and then clamp
this little guy to drill your pocket holes on especially long boards. And the other advantage
to the Kreg jig mini is that its small size allows you to do really common furniture repairs. Maybe
your drawer is coming apart and you want to drill little pocket holes inside to help force it back
together. Well you don't have to take the drawer apart, you can just clamp this in and then fix
your piece of furniture. It's also great for like other things falling apart that you don't want to
completely disassemble to drill your holes. The biggest downside to the mini is that every single
time you use it you need to set your measuring and it's not very easy to remember your guide
system. So I'm just going to pop the guide system right here and basically this shows you when you
buy a Kreg jig mini you need to measure the distance from the edge of your work piece that
you're going to be drilling your pocket hole depending on the thickness of the material. And
then you also need to measure your collar on your drill bit. So this is the drill bit. It's super
powerful and handy but do you see this collar is what stops the drill bit from going through your
Kreg jig tool. And so you need to adjust this based on how thick your material is. So you have
to measure from the shoulder, which is this part of the drill bit, to where the collar is and it
changes depending on the depth of your material. A really common one is a three quarter inch board
that you're drilling a pocket hole in would be three and a half inches the shoulder to the
collar. And you adjust that by this little allen wrench hex here. You just use an allen wrench to
loosen that and move the collar like so. Measuring really is the major advantage to the K4 which is
this L-shaped system. So this allows you to adjust your clamp right here. You can wheel this in or
out and you can clamp in your work piece and then you drill down right here in order to get your
pocket holes. The K4 has a measuring guide for where to set your collar based on the depth of
your material and it's super precise down to the eighth of an inch. The K4 also has this block which
you can remove entirely and use as its own individual piece that you can clamp to a work
piece and it has the perfect spacing for pocket holes. Either these two if you're using a wider
material or you can drill these two together if you're using a thin material like something maybe
only two inches wide. Now this is sturdy enough for you to just set it on the ground and use it
as is which I've done plenty of times but it also has an area right here which allows you to clamp
this whole L piece down against your work bench. The Kreg clamps are super awesome and heavy
duty. They have one side that's wider and one side that's smaller and then here's the thing that
makes it torque tighter or looser. This actually came with my K4. I found a really special
deal. It came with my K4 system but the clamp usually isn't included. I also, when I bought my
Kreg jig, bought a big pack of their awesome screws. The screws are specially designed to
have a large flat head so that they seat and hold your material together within the pocket hole.
They're designed to work with the Kreg pocket hole system. This also gives you a great guide
to the screw length you need depending on the material you're joining together. So it shows
you material thickness and then the screw length and there's a variety in this pack. I'll link it
in the description of this video. One thing that really confused me when I first started using my
Kreg jig is what I should be setting my guide to for drilling if two pieces that I'm joining
together are not the same width. So say I'm joining a half an inch material to a three quarter
inch material and the trick that I've always used is that you should be setting your guide to the
material thickness you're drilling into all the time. So even if you're drilling a half an inch
material into a inch and a half thick material, you would be setting your Kreg jig to the settings
for a half an inch material. If you don't already have a Kreg jig, I'd highly recommend it. It's a
very versatile tool and the mini with the drill bit, it only costs $15. You can find the link in
the description on this video. It's very inexpensive for a lifetime of use in unique situations where
nothing but a 45 degree angle screw will fix it. If you are a DIYer like me and you like to work
on projects with a lot of versatility, then I think you should get a K4 or a K5. I'll link to both.
The K4 has been so easy for me to work with. It makes measuring quick and accurate and I definitely
recommend it. Let me know below in the comments which one you think is better factoring in price,
factoring in ability and versatility to work on different projects. Let me know below your
thoughts and thank you so much for watching this. I hope you learned something and that you'll come
back again to join us on This or That DIY with Welcome to the Woods. Don't miss my other This
or That DIY videos where I've compared saws and drills and I've also compared products like the
video where I compared polycrylic versus polyurethane and a video where I compared glue
down luxury vinyl plank flooring against click together luxury vinyl planks. Watch the whole
This or That DIY playlist.
