4 Confusing DIY Tailoring Terms EXPLAINED

Anthony Rivera
67 followers
2 Video Views·Dec 3, 2022
Let's say you want better fitting clothes so you start researching how to tailor your
own clothes at home and you hear a lot of different words and terminologies and your
face is all like...
Don't worry some of those words matter most of them don't.
I don't like long intros though.
Let's uh let's talk about these.
Let's start with the stitch length and this one is kind of sort of tricky in a way because
you don't understand what an actual stitch is and well a stitch isn't the entire side
seam of your garment.
No it's each individual little stitch and to elaborate on that a little bit more let
me explain.
Imagine your sewing machine needle goes down through your garments and then it comes back
up and then it goes forward and it comes back down again and then it goes up and then it
goes forward.
Well that little section where it went down right here and then it went up and then over
and then it went down right here.
That little section right there is one individual stitch.
And that individual stitch is measured in millimeters so if you look at the dial on
your sewing machine for that stitch length you're going to see some numbers and what
do those numbers correspond to?
Well they correspond to the length of that stitch.
Most sewing machines are going to go from one anywhere up to let's say five or so meaning
one millimeter or five millimeters.
See I told you this was easy.
In a standard stitch on a garment that you are going to get from the store well that's
2.5 millimeters.
So if you want to replicate all of that that you got going on there just shoot for 2.5.
Oh and this is where the whole wiggle room thing comes into play.
So let's say you set your stitch length to 1.5 or you set it to 3.5.
Is it going to make a massive difference?
No not really at all actually.
Now it's not going to make a massive difference but it is going to make a difference in and
of itself and by that I mean if you were to set your stitch length to let's say 3.5 and
you were to then pull on the side of that garment what are you going to notice?
It's kind of a weaker stitch isn't it?
It doesn't really look like it's doing too much.
Well it's kind of sort of not in a way but that's totally fine.
That is totally okay for things like t-shirts or even dress shirts, thinner materials but
when you start moving up into thicker materials things like leather and denim and canvas you
want to make sure that the length of your stitch those stitches aren't too far apart
because again like if it's a weak stitch you're uh you're gonna wear those tailored
jeans out somewhere and yeah you're gonna have an accident.
Let's talk about the next setting or term or word that you're gonna hear and that's
the stitch width and uh 90% of the time the stitch width it doesn't really matter like
at all.
Only true story.
That's because the majority of the time when you are tailoring your own clothes you're
going to be using a straight stitch and well a straight stitch just goes in a straight
line the needle goes in a straight line the needle doesn't travel from side to side in
any way shape or form so that stitch width dial you can set it to whatever it is that
you want to.
It's not going to have any sort of effect on the straight stitch at all.
When the stitch width does come into play that's when you're making another type of
stitch which is called a zigzag stitch and what the stitch width controls is how far
from side to side your needle travels because yes on a sewing machine a needle can and will
go from side to side if you want it to.
You're going to use a zigzag stitch to finish your seams or you're also going to use it
when you're tailoring a sweater.
Now to kind of unpackage that a little bit more it's going to control how wide from side
to side it goes right?
Well why does that matter?
Because when you are finishing the raw edge of a garment you want to make sure to seal
it off so it doesn't just go poof in the washing machine and if the width that you
have your stitch width set to if it's too narrow it's not really going to have a lot
of travel from side to side so you're not really going to it's not going to do what
it is that you want it to do so you want to go wider with your stitch width and you'll
just you'll get there trust me it'll totally make sense it comes with trial and error.
But that being said I do not want you to be that person who worked so hard to learn how
to tailor your own clothes and you get like 85% of the way there and it's time to finish
that seam and then you're like oh I messed up the zigzag stitch because I didn't get
the stitch width right I totally should have listened to that guy.
Next one is the backstitch and man oh man this one this one's funny because in a way
it implies that it is something but it's more of a process than it is an actual stitch so
it kind of confuses people a little bit and some people approach it as if like you're
going to die if you don't make this stitch well no you're not and it's a process because
it's something that you're going to do at the very beginning and the very end of making
any kind of stitch because when you start sewing you're probably going to think to yourself
okay so um what what's keeping all the thread from like not unraveling after I start sewing
is anything keeping it from not unraveling no no it's not or I should say nothing is
well that's where the backstitch or more specifically the backstitch lever on your
machine is going to come in handy because what you're going to do is you're going to
start sewing and then you're going to press and hold that backstitch lever and what it's
going to do oh what it's going to do is it's going to reverse the direction of your sewing
machine so you're going to kind of backtrack about a couple of millimeters and then you're
going to start sewing forward again boom easy peasy you are good to go what just happened
well you kind of backed over what it was that you just sewed so you locked in that stitch
at the very beginning so it's not going to unravel on you and then what do you do with
the very end once you get to the very end of your stitch you do the exact same thing
use that backstitch lever again by the way I got a new camera and I'm using my phone
as a viewfinder and I just now realized that I left it sitting there the whole time awesome
yeah well it happens moving on basting stitch or a baste stitch and this one yo this one
is a straight game changer this one is a-ma-zing the reason why this one is amazing and I love
this stitch is because sometimes you want to know what the finished product of your
garment is going to look like and what it's going to fit like without actually committing
if you have commitment issues just like I do I totally get it the basting stitch is for you
because let's say you measured something and you pinned it up and you're still kind of like
I don't know I don't know if I actually got the measurements right I don't know if I'm
going to like the fit I don't really want to commit to this I don't want to commit to this
so what what do I do is there an option where I can just like try it on to see how it's exactly
how it's going to fit yeah you can so what a basting stitch is going to do is it's going to
be like the easiest lightest most weak stitch you could ever possibly think of because when it comes
to strength it's going to come right out with a seam ripper what you're going to do is you're
going to set your stitch length on your machine as wide or excuse me as far as it will go so set
your stitch length to let's say about five and then for your stitch tension go as loose as your
machine will possibly go so that thread is just gonna barely be in there it's not really gonna
do anything aside from just kind of moderately hold the shape of that garment so that you can
try it on you can put it on and you're like okay cool I did get the measurements right
then you just take a seam ripper boop that thing will just pull right out just like that and
you are good to go well you're good to go to then go back and put a proper straight stitch in there
which is a little bit redundant and repetitive but at least you know that you like the garment now
right this term is funny and frustrating all at the same time because it doesn't really make any
sense and by that I mean the name in and of itself does not give you any indication as to what it is
at all and that's a seam allowance now when I just said seam allowance you're probably sitting
there like what is that I don't get what that even means like at all and I'm like yeah I know
I didn't really get it either I'm like why oh is it important is it not important I think it's
important what the heck is a seam allowance well the seam allowance is just the distance between
that stitch that you just put on your garment and then the edge of your garment that's it because
see when you put a new straight stitch on that garment you're going to cut off all that extra
fabric on there between the edge and then that stitch you just put on there well all of that
space right in there that is your seam allowance and this is where it gets a little bit tricky
because as a general rule of thumb you want to shoot for five-eighths of an inch in that space
in there but just don't panic don't worry like it's literally not the end of the world at all
if it's not exact and you can kind of ballpark it in a lot of ways yeah I just said that the
you just don't even worry about it the reason why you don't need to worry about it
is because well if your seam allowance if it's too small if it's too narrow you're not going to
be able to adequately put a zigzag stitch right on the edge there you're not going to have enough
space between the edge of your garment and that new stitch that you just made but well if it's
too wide if you left too much of a seam allowance is it the end of the world well no but it's not
really comfortable either you got like this flap of fabric in there like just this big hunk of
fabric and you're like oh serious I don't even raw edge remember when I told you that you make
a straight stitch and you cut off all that extra fabric you know seam allowance blah blah blah blah
well that edge that you just cut that is technically a raw edge and a raw edge means
like it's not finished at all it's gonna just unravel on you just go poof in the washing machine
now imagine a fabric weave it's it's kind of like that right so it's like it's either kind of loose
like that or it's tight like that I hope this makes sense and I really hope I cut my fingernails
before they're okay all right so let's say it's kind of like that you cut it we'll see my top
fingers right here as time goes on this part of the weave is going to go down and then these are
going to be exposed and just get all frayed and just yeah so you want to put a zigzag stitch over
that raw edge to make sure that that doesn't happen and some weaves of fabric like let's say
athletic shirts you don't really need to finish them that much with a zigzag stitch you can use
pinking shears or you can just cut it with a regular pair of scissors and generally speaking
you'll probably be okay but denim no no no no steer clear of not finishing denim because that
will just go poof even if you finish it it's still gonna oh you got time
