CHRISTMAS TREE TUTORIAL!

Designer Christmas Tree
129 followers
4 Video Views·Nov 30, 2022
How to decorate your Christmas tree in 6 easy steps!
Okay guys, so the very first step, obviously, to putting your tree up is make sure you have
lights on it.
Now, the rule of thumb for Christmas trees is for every foot, you need about 100 lights.
For this tree, it is a 7 1⁄2 foot tree, so I would recommend getting around 5 to 700
lights.
That is going to give you a really bright tree, and it'll be perfect for the size.
Now, this tree is pre-lit, so I have yet to buy lights for it.
This is the second year that I've used it, and honestly, most of my trees with the pre-lit
lights only last me about two years, because I leave my lights on for so long, but if you're
starting with just a tree that has no lights, that is kind of the rule of thumb you want
to go by.
Now, the next thing when it comes to putting your lights on the tree.
A lot of us will go around and around in circles around our tree to put lights on.
I'm pretty sure everybody has done that at some point, or they're still doing that.
What I personally do, and I have found this has helped tremendously, it's helped save
time and it makes it look better, is to start in the back corner of the tree, and you're
going to go up the tree, and then back down the tree.
Now, I don't go straight up, but you'll kind of like shove it, so if I'm going to start
my tree lights, I would probably start back here somewhere, and then I will just kind
of tuck and shove all the way up the tree.
This makes it so much easier, not only to put up, but when you're taking the lights
off the tree after Christmas, you kind of can just pull, and all of the lights come
off at one time, so it'll save time, and it will honestly look better, so you don't kind
of get that like circular look to your Christmas lights.
It kind of gives it more of this look to the tree.
Okay, guys, step two is putting on the ribbon.
Now, as you can see here, I have two different kinds of ribbon.
I always suggest using at least two different kinds.
You want different colors and textures to really give that tree variety.
Okay, when I start with the ribbon, I'll start about right below where the topper will be
is where I will start the ribbon, and I'll show you guys the technique that I use.
I will just stick one up there, stick the end, and then shove it in.
Can you guys kind of see that?
And shove it.
Something I like to do with ribbon, I only use two full spools of ribbon.
I didn't get like a whole bunch.
It's just two individual spools of ribbon, and what I do is I'll cut them all at different
lengths, and there's really no rhyme or reason to it, but I don't cut them any less than
like about three feet because you want room to do at least three bunches, otherwise it
kind of looks silly if it's a little bit too short, so I do it at least three feet.
Some of them I have like six feet long.
Now, these spools were really big.
I can't quite remember exactly how big they were.
I got these at Taipan, so if you have one of those in your area, definitely check them
out.
I think it was about $12 for this, but it does, I mean it covers the entire tree for
what I need it for.
Once I have my starter ribbon on, I'll go next to it, and what I will do, where this
bunch is out, I will put one, I'll start one in there, okay?
So, the technique I really use is honestly just shove, shove, shove, and I just make
like little lumps everywhere throughout the tree.
After I get the tree topper on, I then do the big, huge ornaments.
Using the same like zigzag technique, I'm going to start putting all the sticks on.
Place all my poinsettias, which are my filler item.
This is going to help with any large open spaces.
I would definitely suggest having something that you can kind of spread open and stick
in those areas where there are bigger holes.
