Learn how to make this modern planter holder & desk lamp. These dollar tree DIYs are easy to make and doesn’t look cheap, It could pass for high end decor. You can put your favorite flower or succulents in the mini planters. These are budget friendly home decor craft ideas for 2020 and under $10.00 to make. This project is simple and affordable to make.
~~~~~~~~~~ Give This Video A Thumbs Up It Really Helps Out My Channel! Please Subscribe And Hit The Bell Button To Make Sure You Get Notifications Every Time I Upload A New Video! ~~~~~~~~~~
~~~~~~~~~~ ~*~ Simple Cheap & Easy DIYs ~*~ Craft Smarter Not Harder ~*~ ~*~ Make Budget Friendly Simple Do It Your Self Craft Projects ~*~ ~*~ Some Links Are Affiliate Links Which I Earn A Small Commission From Each Sale At No Extra Cost To You ~*~ ~*~ This video is NOT Sponsored ~*~ ~~~~~~~~~~
Welcome everyone, my name is Jessica the Simple DIYer.
If you're already a subscriber to my channel, welcome back. If you're new to my channel,
make sure you hit that subscribe button and also hit that bell notification. That way you're
notified every time I upload a video. Also, make sure you hit the video like button and leave me
a comment below. As always, you can check the description box for a list of the items I used
and let's get started. In today's video, we're going to be making this modern high-end decor.
Before we get started in today's projects, I do just want to show you a few products that
I received from Surebonder, which I was very excited to receive these and excited to use them
in today's video. Some of the items I'll be using in today's video and some I will use in
upcoming videos. In today's video, I'm going to be using this specialty hot glue gun with
detailed tip, which I'm very excited to be trying out. It does have where you can safely lay it on
its side or it does have a foldable stand as well. It also has an auto shut off. Also, I'm
going to be using this glue gun silicone pad, which I'm excited to be using. You'll probably
see me use this in a lot of my videos. It is heat resistant and it will allow the hot glue
not to stick to your surfaces. I'm also going to be using these clear mini glue sticks today.
Now, I'm going to show you a few products that you'll see me use in some upcoming videos.
One of them is this high temp mini hot glue gun that is cordless, so you can actually charge this
using a USB cable. It also features the auto shut off as well. Also, this full size dual temp
hot glue gun, which does have 50% more power, also features the auto shut off and you can
interchange the nozzle tips. Then we have these tough sticks that are ultra strong to provide a
more tough hold and this five foot glue stick roll, which I'm excited to use this because I
always have to change out my glue sticks. Also, these regular size hot glue sticks,
which are clear and they are meant for the dual temp glue gun. Then we also have these
mini glue sticks, which are the color sticks, which I'm excited to try these out as well.
Also, these black fabric glue sticks for gluing darker fabric and these white fabric glue sticks
for gluing lighter fabric together. These glow in the dark glow sticks, I can't wait to find
a project to use for these. Also, the glitter glue sticks, those are for the mini glue gun,
as well as these jewelry glue sticks, which is also for the mini glue gun.
We do have the color glue sticks in the color silver and also the color glue sticks in the
color gold, which you'll see me using these in an upcoming video as well.
And now let's get started with today's projects. First project, it's going to be inspired by this
metal house from Kirkland, which is 2624. And I'm going to start off by taking two of the 32 inch
bamboo skewers and cutting those down to approximately 24 inches. Next, I'm going to
take a third bamboo skewer and mark out six pieces at three and a half inches long and go ahead and
cut those out down as well. Now I'm going to take one of the three and a half inch pieces and I'm
going to glue that to the longer bamboo skewer at four inches. Once I have the first one glued on,
then I'm going to take the second skewer and I'm just going to apply that about a half of inch
above the first one that I glued down. At first, I was using this clear pad to protect my surface
when I was gluing these dowels down, but the glue kept sticking to that and I forgot that I had had
the silicone pad. So I'm actually going to start using it and it is great. The glue does not stick
at all to it and you can remove it very easily to move your project around to glue it down.
Once I have the first set of three inch dowels glued down, I'm just going to move on and repeat
those steps two times. I'm going to glue the first dowel four inches from the last dowel I glued,
and then the next one a half an inch and just repeat the process as you can see me doing here.
I do have to say I really am enjoying this glue gun with the detailed tip because it allows just
the right amount of glue to come out for these smaller projects without having to take a lot
of it off. So it does really work out good whenever using more of the smaller surfaces to glue.
And this is what it should look like once you have the pieces glued down,
almost like a mini ladder. Next, I'm going to take two pieces of the wooden dowel cut at four
inches each and I'm going to glue those to the top of the stand to build a triangle shape. Once
I have that shape built, I'm just going to go ahead and hot glue those on as well. Now I'm
going to take the apple barrel paint in the color black and just paint the entire piece.
Next, I'm going to take these metal tin buckets and I got these after Halloween,
so I'm just going to paint the trick-or-treat in apple barrel paint black and remove the handles
off. Now you can also use the white buckets from Dollar Tree and just paint them black,
but I had gotten these for I think 10 cents on sale, so I just decided to use these for this
project. Next, taking one of the buckets, I'm going to glue it to the bottom dowel and then
I'm going to repeat this step for the next two lines. Today's video question is, have you used
the Surebonder glue guns? If not, do you plan on using them? Leave me a comment down below and let
me know. Next, I'm going to take three of these succulents and I'm going to remove the styrofoam
as well as the plant from the containers. Once I have all three removed, I'm going to place one
in each of the metal buckets and this is what the completed first project will look like.
For the second project, I'm going to take two of these metal paper towel holders and I'm going to
flip one upside down. Using some of the black zip ties, I'm going to zip tie the top of each side
as you can see me doing here. Now on the opposite end, I'm going to use the hot glue and go ahead
and glue those pieces together as this is the piece you'll be able to see. With this detailed
tip, it works perfect to get in the small space here between the two metal pieces and it hardly
will be able to tell that there was any hot glue used because it goes right into the line. Now,
normally I would have spray painted this black, but I didn't have any so I used this apple barrel
paint in the color black. This is after one coat, but I did end up using three coats to coat that
completely. Next, I'm going to take this smaller mirror and just remove the back off and use this
as the base. I'm just going to slide the paper towel holder in between the plastic. Now, you
can use the black part of the mirror as the base if you'd like, but I decided not to use that
and I just went ahead and removed that off. Next, I'm going to take the hot glue and just go ahead
and glue the mirror frame down to the metal paper towel holder as you can see that I'm going to be
doing here. For the lampshade, I'm going to be using this plastic bowl. Now, you can leave it
clear if you'd like, but I decided to use a coat of this frosted glass from Krylon and I did have
an old can so it didn't spray out the best and I didn't have another bowl to use for this project,
but if you do have a fresh can, it would actually look really good. Taking this book light, I'm just
going to cut the metal piece off as you can see that I'm doing here. Now, you can use the push
lights that Dollar Tree has as well. I just didn't have any to use for this project. For this next
step, I'm going to take the bowl and set the top of the lamp right down inside and I'm going to
apply hot glue to the book light. Now, whenever you glue this down, just make sure that you face
the switch on the outside. That way, you can actually turn the lamp on and off. Once you have
it glued in place, then you'll be able to slide it off and on with no problems. Once I had the light
glued down in place, then I'm just going to take the hot glue and apply it around the paper towel
holder to the bowl. That way, it'll go ahead and give a permanent hold. This is what your completed
lamp will look like. Thank you so much for watching today's video. I hope everyone enjoyed it. If you
did, make sure you give this video a big thumbs up. As always, you can leave me a comment down below
and if you're not already subscribed to my channel, make sure you hit that subscribe button.
Until next time, hope everyone has a great day.