Crafting Traditional Bamboo Fans 丸亀うちわ

Traditional culture of Japan
89 followers
11 Video Views·Nov 24, 2022
Let's do it.
One, two, three.
And this color.
This is the base.
It's reddish, so if it's the base, it's OK.
Bamboo, Uchiwa, uses Matake.
Bamboo like this.
First, this part.
This work is called Uchimi-otoru.
Uchimi-otoru is to make this thickness 3mm.
From 2.7mm to 3mm.
Do it up to here, and then use a waki-ki.
There is a way to do it with a knife,
but I do it like this until the end.
I only make a cut up to here,
but bamboo is made of fibers,
so if you do a rough work in front of the fibers,
the thickness will come down.
If you do it up to here, it will look like this.
Depending on the craftsman,
there is a slight difference, but it's about 3mm.
This part is 0.5mm.
Do it like this.
If you do it up to here,
make a hole here.
The person who made the hole
will draw a picture.
It's easier to hold.
This is called Yumi-kama.
Insert this.
The Yumi-kama I made up to here,
I will weave it with a thread.
I will weave it alternately.
As it is written in Yumi,
it is a bamboo, so I will use the power to return.
I will weave it alternately from both sides,
and if I put the power to return the thread,
it will be flat.
It will sleep.
This is 0.5mm.
This width is 3mm.
I'm aiming for this.
This is the basic to make a bamboo bone of Marugame.
The craftsman does it up to here,
roughly divide it,
make a bone,
go to a needle shop,
put it down at the needle shop,
put it down at the needle shop.
In the old days,
I used to do that kind of work,
but recently,
I was pushed by plastic,
so I couldn't do mass production with bamboo.
In order not to lose to plastic,
we did this kind of work by hand.
We put a Tosawashi on it,
and we do it in that direction
because it is a small-scale production.
My name is Motoshi Nakata,
I didn't have much awareness of art,
especially when it came to Uchiwa.
However, in Japan,
when people turn 60,
they welcome their retirement,
and say,
let's do what we like.
I don't mind doing that
from the age of 30,
or from the age of 40.
When I was 40,
So I didn't have much awareness
of art.
So I met a lot of people
and listened to their stories.
One day,
I saw an article
about a woman called Hayakawa,
who makes spring work.
I thought,
let's meet her first.
So I went to her house,
and she listened to my story
She introduced me
to the president
of the association.
At that time,
as a teacher,
he was a traditional craftsman,
and his name was Nishimoto,
also known as Honeshi.
So I joined
Nishimoto's workshop
and started making.
Now, when there are fewer craftsmen,
I have to do all the work
from taking the dimensions
of the materials
to selling them
to the designers.
It's not easy
that requires all your effort.
There are a lot of things
that go well
and don't go well,
but it's fun
and difficult.
It's self-expression,
and you have to go through
the hard part
of being evaluated.
In that sense,
it's especially rewarding.
The problem is
that even if you make
a good bamboo bone
and a good needle,
the design is important
whether or not
Even the bamboo bones
that are in the uchiwa
don't attract the attention
For example,
when you meet a person
for the first time,
you don't think about
what's going on
inside their bones.
So even when you face
that reality,
you can use the Japanese paper
that you think is good,
or you can go to a person
who is making a good hanga
and say,
I'll do my best until today.
So if I don't like it,
I can quit today.
That's why I started from the beginning.
If I don't like it,
I can quit.
If I don't like it,
I can go to work
to get paid.
That's why I started
from the beginning.
First,
I put glue on the bones.
Before that,
I put glue on the bottom.
I put glue on the bones
so that it can stick out
from about 1 cm from the itoyama
and to the edge.
Let me try.
About 1 cm.
I put glue on the back of the bone.
About 2 cm down.
I put glue on it.
Make sure that the gap between the two pieces is about 7 to 8 mm.
This is 7 to 8 mm.
Place it so that it fits the paper underneath.
This is called a sasaragake.
Roll it up, roll it up, roll it up.
This is the back side.
Roll it up, roll it up, roll it up.
Next, roll it up from the bottom like this.
This is called a hamaguri.
Make sure that this part fits.
Hold it firmly.
One, two, three.
Next, cut this side.
This is the part that hasn't been thawed yet.
Make the nori a little thicker.
You can't tear it with your hands.
Even if it's this thin, you can't tear it with your hands.
So I usually use scissors.
Place it so that it comes right in the middle.
If you're a beginner, this is a big deal for you.
It seems to be the most fun to hit.
Use it so that it's half the size of the bottom line.
To be honest, I don't have the courage to follow the tradition.
I don't want my children to do it.
Tradition is one of the strongest seasonings.
As I said at the beginning, I use natural Japanese paper and bamboo.
I want to make what I imagined.
I want to make it into something that actually exists.
It's worth doing.
There are so many things like that.
But in reality, it's about whether or not you can live with that income.
There are some tough places in the end.
But if you develop it, you'll be able to do it.
I think I've been able to prove it for 20 years.
Basically, it's about creating and self-expression.
I'm Yamada from the Kagawa Prefecture Inland Cooperation Association.
This is the Inland Port Museum.
It's a museum of the Inland Sea of Marugame.
The Inland Sea of Marugame has changed a lot from the plastic machine needle.
But we still have to continue to innovate the technology of bamboo.
We hold a technical and legal course once a year.
It's held from November to December.
This is the 23rd time this year, so it's been 23 years.
The content of the course is...
It's basically a month-long course for craftsmen and teachers.
I'm going to teach you how to make the Inland Sea of Marugame.
I'm going to work at an advertising agency next year.
I do PR, advertising, events, and other things.
I applied because I wanted to try traditional crafts that I liked.
I think there are a lot of traditional crafts.
I think it's good that everyone can use it.
And I think it's good to be able to see the whole production process.
I think it's good to be able to see the whole process.
For example, in the case of lacquer painting,
wood is made and painted.
I think it's good to be able to see it as a whole.
And I just like Uchiwa.
That's the biggest thing.
I'm not the kind of person who cuts with a pencil.
That's pretty difficult.
It's all difficult, but it's all fun.
I can learn a lot of things that I've learned so far.
I like that kind of thing, so it's a lot of fun.
They're so kind.
I think it's amazing.
