And if you want to keep up day to day stuff check out IG I'm every where
Hey everybody and thanks for tuning in new and returning viewers. My name is Kevin and I go on
adventures between hiking, biking, trail building, race promotion, just an array of things and I make
videos and share those adventures with you guys and today we're actually headed to my buddy Seth's
house to customize a trail tool. Hey guys and welcome back. Today we actually came over to my
buddy Seth's house because he has a garage and he has a place where I can use tools and he doesn't
mind as long as I clean up. One of the things that we're gonna do today while we're over here is that
we're gonna check out a tool that I've been using for trail building and that's the McLeod.
This is a pretty new one. I've only used a tiny little bit but what I found is when I've used one
that was a lot more heavily used, the tool is sharper and worn down so we're actually about
to customize a brand new one and we're gonna make some alterations to this making a custom tool
because I feel like I kind of know what I want out of the McLeod. It is the best tool of them all but
let's go ahead and hop in and start customizing this thing.
It's for, yeah it's for building stuff to ride bikes on. Oh look how thin it was dude.
So what we've got here is a few things that we're changing from the original McLeod.
Okay so I shortened it up because I feel like the tool is used for a couple different things.
When you're using this front edge you're like cutting and doing the back sloping and you're
not really moving a lot of material so this piece right here doesn't need to be that deep.
It just needs you to cut in and pull because you're scraping and carving with this side.
Then the back side didn't need to be as long or heavy because all you're doing with this
one is you're actually moving material and if you are moving a thick enough material to fill
up the whole McLeod it's pretty heavy and you're not, it's gonna be tough to do that all day. So
rather than like fighting with it I want the tool to do a little bit less so the weight in my hands
a little less when I pull on it so I can do it all day. So I shortened these up so that I'm just
pulling roots and minimalizing the maximum material that I can go. I want to sharpen this
other side it's not sharp so this will be the one that I keep sharp for like when I need something
big I won't use it as much and on this side I put little edges in it so that I can use this for
grating a small area of dirt if there's a small hump and I want to just carve in just a little
bit that's where these small teeth come into play that I use with a grating rake. So the McLeod is
a fire tool 48 inch handle and it's meant for doing a fire break in a trail so it's not meant
for trail building so that's why a lot of people and companies have tried to customize this in a
way to make it more for a trail tool because the trail tool is much more specific you need to be
carving and shaping where with a fire tool you're just making a big ditch it doesn't have to be
anything perfect. So this is is my version of what I would see because I really like the McLeod
I like how the material is super strong it's not going to chip or bend or anything like that
it's super durable. I'm not going to change the material I think other people have
used tools and changed the material and it loses its strength so I want to keep that strength and
just make it a little lighter in my hand to do shaping with. Slightly used McLeod sharpened a
couple times you really shouldn't have lost any material at this point. Zeroed out and we're
going to do pounds makes more sense so this tool is four pounds 15 ounces it's an ounce difference
from five pound tool. Four pounds 15 ounces okay so let's weigh the other one see was this the
exact same McLeod? Exact same McLeod okay I just destroyed this brand new one. Four pounds six
ounces so let me do the math. Nine ounce difference? Nine ounce difference so let me do the math.
All right so it lost 11 and a half percent weight which is quite significant. Yeah I would say so
it's like a half pound and if you're swinging something all day long. Well you know what's
really significant is it's going to carry less dirt each swing too so there's a lot more weight
there than we're accounting for. Yeah because when you're swinging around you're going to be pulling
less dirt it's just going to make the tool a little bit easier to use because by default you
won't be able to pull as much material. Right. No matter how hard you want it that'll just give
you more strokes so I guess if it was 10% less could you say you could do 10% more strokes with
the tool? I would say it's a fair bet. 10% might not seem like a lot in one project but all day
10% is a lot of productivity. Well looks like we're wrapping things up. I hope you guys liked
my version of a custom tool. Give it a try do something different. If you end up making your
own custom tool tag me on Instagram I'd love to check it out and give your tool a share.
Pedal a little harder and don't touch the brakes. Also don't forget to subscribe. There's like 80%
of you guys that just got to the channel today. I'd love for you guys to subscribe and not miss
out on the next adventure. The other 20% of you guys, nothing but love and we'll catch you on the
next episode.