About a week ago, I asked you guys on Instagram to submit any DIY/decor ideas you would want me to try and recreate! I received so many amazing messages and such creative ideas. In today’s video, I’m recreating a few of my favorites. How do you think they turned out? Comment below which one you’ll be recreating.
T H A N K Y O U Thanks so much for watching and I hope you enjoyed. Leave any future video ideas you would like to see in the comments below and don't forget to subscribe!
Hey everybody, welcome back to my channel.
Drew here from Lone Fox and we have another episode of a series that I actually haven't
done an episode of a while in.
A while in.
And that is DIYing your DMs.
Can we also talk about my background at the moment?
My fireplace.
I've never filmed in front of it and now that I've painted it black, all I want to do is
film in front of it.
Like it's so pretty and I set up the camera and I was pretty shocked at how this looked.
But besides that, we are going to be doing some DIYs today and they are so good, you
guys.
I feel like I haven't done a lot of DIYs on the channel lately.
I've been doing more like full room makeovers or kitchen transformations or tip driven videos
and I haven't done DIYs in a while.
So I have four incredible projects for you guys today that you sent me over on Instagram.
So if you're not already following me over on Instagram and TikTok, make sure to do so
because you guys can actually send along DIY ideas.
And if you're one to not stick through an entire DIY video, this one might change your
mind because all four of these projects turned out absolutely incredible and I'm so excited
for you guys to see them.
And before jumping in quickly, I wanted to share a special announcement.
We were nominated for a Webby Award, which is absolutely insane.
Lone Fox was nominated, which is crazy and this was all because of you guys.
All the constant love and support.
We were nominated under the how to and DIY category, which is insane.
So I'm going to leave the link at the top of the description box below.
Just takes a couple of seconds and you guys, we could win this thing.
So that's really, really exciting, but let's go ahead and dive on into our DIYs.
Grab my phone because I'm going to read you guys our first DM that was sent over by Lone
Fox family member, Sid, and she says, Hi Drew, I've been eyeing this hook for a while now,
but can't rationalize spending $120 on it.
Would love to see how you DIY it.
And I'm not too sure where this particular hook is from, but from looking at it instantly
in my head, I came up with a couple of ideas and then I conceptualized it a bit more and
this is what we created.
For our first project, we're going to be using a one and a half inch wooden dowel, some large
wooden balls, some smaller wooden balls and some epoxy.
So with our larger wooden balls, I'm going to actually turn this into a screw.
So I grabbed a screw for my stash that was two and a half inches long.
And then on the backside of that ball, I actually drilled a hole wide enough, but not all the
way through, just about half of an inch in there.
And then using my welding epoxy, you can get this at any hardware store.
I will link it below for you guys.
You're just going to mix up equal parts of that.
And this will mount our screw inside of the ball and make it so that the ball is the actual
screw or kind of the mechanism of the hook itself.
So we're just going to want to make sure that our screw is securely fastened in here.
And this kind of welding epoxy works great for that.
It is extremely strong, like this is going absolutely nowhere.
And I set it on top of a vase to cure for about six hours.
Once it was done curing, I pulled off the tape and you guys, it's not coming out.
It wasn't really going anywhere.
So I grabbed some gloss glaze.
This is the Sculpey gloss glaze and all the materials I'm using for all of these projects.
I will link below for you guys.
So just make sure to check the description box.
So I painted the larger ball with the gloss glaze only.
And then over on the smaller ball, I'm using some gold paint just to go ahead and paint
on this ball here.
Now, I'm going to do two coats of the gold paint and then one coat of the epoxy just
to make it nice and shiny.
I went outside and cut down my dowel to about nine inches tall, but you can adjust it to
whatever height you'd like it to be.
And I went ahead and glued on my smaller one.
As you can see, it had a hole in the backside, but I just hid that on the backside.
And then I figured out where I wanted my larger ball screw or the actual piece that's going
to mount this to the wall to go.
And I drilled directly through my dowel.
Now, this is an oak dowel and it was surprisingly hard to drill through, but I got it through.
And as you could see, our nice screw ball.
That sounds so strange.
Fits right through.
And all you have to do to mount this on the wall is simply place the screw through your
dowel and then just screw it right into the wall.
You might want to drill a hole first, a little bit smaller than your screw, but once you
have it in, it is nice and firm.
And I just love the minimal kind of Scandinavian vibe of this.
I feel like it's very sculptural, but also functional.
That hook was honestly pretty cute and surprisingly easy.
But our next project is not as easy.
It's a little bit more intense, but it's definitely doable, you guys.
This was sent over by Christian and he said, I saw these photos on Pinterest the other
day and saved them and I'll pop them up right here for a DIY in your DMs episode.
And I can't remember if you've done a rattan light fixture, but I feel like this one screams
lone fox.
I don't know if you're still into rattan or cane, but love you, Drew.
And thank you so much, Christian.
Love you as well.
And I definitely am into rattan and cane.
I still use it in a lot of my designs, but I actually prefer the stained version or like
darker cane and darker rattan lately.
So I'm going to put my own spin on this particular chandelier right here and actually create
it for a fraction, a fraction of the price, which is absolutely insane, but this is how
I did it.
The first material we need for this project is some woven cane.
And I got this at a local shop here in Los Angeles, the Cane and Basket Supply.
I will link them below.
They are incredible, you guys.
I actually loved this color of cane and asked them like why it was this color.
And they said it was because it was 50 years old and they sold it to me for $2.50 a foot.
So I was pretty excited about that.
I brought it home and soaked it in some hot water in my bathtub for about 30 minutes.
And while that was soaking inside, I also picked up six of these 12-inch embroidery
hoops from the craft store.
And I'm actually going to be spray painting these embroidery hoops with some black spray
paint.
So you can get these on Amazon in bulk or wherever you'd like to.
I'll link them below for you guys.
And I'm using a satin black finish spray paint.
And I'm just going to be spraying the front side and backside completely with a full coat
of black.
And while those dried outside, I went back inside.
And as you can see, the water changed colors tremendously.
I couldn't believe it was this dark, but I just pulled it out of the bath and dried it
off with a towel.
And then we're ready for our next step in the process.
So I grabbed my embroidery hoops from drying outside, brought them in and opened them to
their fullest width.
And what we're going to be doing is actually cutting a small piece of rattan that will
fit inside of that section and essentially pressing it into an embroidery hoop like you
would fabric.
Now I thought it would be pretty simple once I softened them to just press it right in,
but it definitely was not as easy as I thought.
But if you have a friend, it is so much easier.
If you can have four hands on the embroidery hoop, you can kind of press from all four
directions and the top hoop will slip over the bottom one and it's just much easier.
So once I had it all like that, I tightened it up with some pliers on the little screw
itself.
And you're just going to repeat the process to the rest of your five embroidery hoops.
I ended up using a total of six of these circles, but you can totally adjust it to however many
you would like.
And once you have all six of them placed with the rattan on the inside, just bring them
outside to fully dry for about an hour or two.
Now for the base of the lamp, I didn't really know what to use, but I have this small planter
I got at the Goodwill for $3 a while back.
So I ended up thinking it would be a perfect size for this, but I didn't love the dark
brown wood.
So I just did a coat of the satin black as well.
I really want the rattan to be the pop and kind of focal of this light.
So the black is going to be kind of our trim and accent color.
So after I sprayed that and it was drying, I went back in and cut all of our excess rattan
and tightened all of the screws of our embroidery hoop so they were good to go once we wanted
to kind of assemble our light fixture.
I will say the hardest part of this entire process was drilling the hole in the top of
our pot here.
It wasn't hard.
It was just a little scary, but I got it.
Do not worry.
Now I'm slipping in an Ikea light cord.
I use these for all my DIY lights.
They're just the best light cord, super simple and affordable.
Popped on the insert on the inside there.
And then it was time to figure out how I was going to be attaching everything together.
So I had these eighth inch dowels and I thought, why don't I just use these to attach from
the little pot to the rattan circles?
And you guys look at this tiny little miter saw I got on Amazon.
You need this.
It is perfect for dowels or small DIY craft projects.
I'll link it for you.
But I just drilled right through the side of our embroidery hoop and pushed our dowel
into it.
I used a drill bit that was a little bit smaller than the dowel itself.
So I had to use some force and the pressure is what's holding everything together.
So I cut each of these sticks to about six inches, but I did vary the lengths of them
so that the circles would kind of stick off in different areas.
And then I drilled directly into the pot as you could see, and I just stuck the stick
inside and inserted each of our embroidery hoops that are filled with the rattan material
into our light fixture.
And it was really simple.
This process was actually the easiest part of the whole thing, I'd say.
But once you have it completely done, you can totally go back and adjust it if you'd
like to.
But I would also suggest painting your dowel.
So I just used some black acrylic paint to go in and paint all of our connectors, which
overall made this light look finished and complete in one solid piece.
I cannot believe this is a DIY project.
Okay, guys, don't click out yet.
I promise you the next two projects are not as hard.
They're really cute though.
And our next one is from Caroline.
And she actually didn't send a message, she just wrote, DIY my DM and sent a photo of
her DM.
And you know what, Caroline?
I am going to do just that.
And she actually sent along this record player, which I believe looks handmade.
It looks pretty simple.
And I headed to the hardware store, got some wood and a couple of supplies and actually
created this for a very, very affordable price point.
Project number three is the easiest furniture build ever.
I picked up three of these boards from Lowe's.
They are 16 by 48 and they are actually paneled and glued together.
But I love that look because when you stain it, it almost gives you like this checkerboard
effect.
So on our first board, we're actually going to be cutting this one down to three different
sizes.
And I drew a bunch of diagrams for this one.
So as you can see, we have our three boards here to start, they were $15 a piece.
And with our first one, we're going to cut three 15 inch sections out of it.
So that's exactly what I'm doing now.
And I think this wood was really affordable because it's actually glued together, but
it's still really strong in the end and I love it for this project.
Now next for our cut, we're going to take our second piece of wood and chop nine inches
off the bottom of that.
This is going to be the top of our record player and that nine inch section that we
cut off is going to be the area on the side where we're going to add our records to.
So I'm just cutting that off right now.
And when you piece your cuts together, it's going to look something like this.
So I ended up using my nail gun just to hold the pieces together while I went in with my
drill to drill some pilot holes.
Now this is totally necessary when you're using wood like this because you're not going
to want the screw to split it.
So drill a pilot hole first like this and then drill your screw in next.
And I'm using two and a half inch screws here and I just always use the same exact one.
I'll link them below for you guys, they're my favorite.
So I screwed on our top portion first and then I'm screwing on the bottom here.
So this is going to be flipped over and that's going to be the base of our unit.
And you're also going to want to add that last 15 inch section to that far edge and
then drill all the pilot holes in this area as well and screw directly in to create this
base here.
Now it looks a little crooked on camera, but I promise to you, it wasn't, the floor is
just crazy.
And now we're going to go ahead and create the legs, which I wanted to give this piece
more of a mid-century leg.
So I went ahead and cut down a piece of wood to nine inches tall.
And what I'm going to be doing is measuring over two and a half inches on the top and
one and three quarters on the bottom.
Connect those lines together and that's going to give you the angle you need and you can
just repeat that process all the way across your wood to get however many legs that you
want.
And I ended up needing four of them.
So these are my cut out legs here and I went to go place them on the bottom, but I realized
they just stuck straight up and down, which was not the look I was going for.
I really wanted a bit of an angle to them.
So all you have to do to get that angle is just go ahead and measure half of an inch
to nothing on the end there.
If you can see, I'm going from half of an inch on one side to nothing on the opposite
side at chopping that off and using some L brackets to mount this onto the bottom of
our piece.
Now it's really nice actually having this paneled wood because it kind of acts as a
line for you.
So you know exactly where to put your legs.
So I just followed the paneling on the wood and just made sure that they were all in the
right place.
And I did use two brackets on the front side and backside of each leg.
And I just made sure to set the front leg back far enough to where the only way you'd
see it is if you're really underneath it and up close to it, you know, but it really did
need this structure and durability.
So I wanted to make sure to add two brackets to each side and I flipped it over and I was
thoroughly impressed with this piece, you guys, but the staining is what really made
it come to life.
I used a special walnut stain by Minwax and because of the paneling of this wood, every
single section on this media console literally was different tones, which I loved so much.
Like each little piece of wood had its own little moment and all the knots really popped
out and overall, I just feel like this wood stained beautifully.
I could not believe this ended up being a $50 record player in the end.
Everything looks so high-end and it looks like a piece you'd find at Urban Outfitters.
And our last project is perfect for anyone who has a pet.
This is such a cute idea and actually Lone Fox family member Lauren sent this over and
she just said, super cute DIY project and sent a photo of it and it was this rattan
like dog cage side table situation and I just loved the way that it looked and it instantly
made me think of the tray table that Ikea had and I knew I had one on hand, so I whipped
out some cane, my tray table, and put together a really cute side table that doubles as like
a little house for your cat or dog as well.
Whenever I get the opportunity to DIY something pet related, I always go for it.
So I grabbed this Gladham Ikea side table, which I actually already had in my stash and
I moved the tray from the top to the bottom and then I got this 18 inch round piece of
wood from Lowe's and this 24 inch wide rattan material from the same basket and cane supply
shop in Los Angeles.
Now what I wanted to do was figure out how much of this I actually needed and I ended
up buying 6 feet of it just to make sure I had enough, but I went and wrapped it around
my piece and just cut off any excess and then I wanted to find the exact middle of our cane
to create the opening for our little pet home.
And to do that I rolled out some paper, this is the kids craft paper from Ikea, I'm obsessed
with it, I have like 10 rolls at my house, and I just cut a piece off but I made sure
to fold it in half because we're gonna draw half of our arch shape onto this and when
we cut it out and open it, it's gonna be the full arch.
So I just freehanded this, I always freehand my arches, but if you want to draw one properly
you can totally use a rounded bowl or something to do so, but I cut this out and this is what
my shape ended up looking like once I had opened it up, which was pretty nice, I love
the way that it looked, and I then went ahead and trimmed off one of the unfinished edges,
I just wanted to make this nice and straight so I can see what we were working with because
this is gonna be the bottom of our opening.
So I kind of wanted to figure out again where the middle was and then I placed my template
that I created for the arch right in the middle and drew around that on the rattan material
and then used some scissors to cut out our opening.
Once that opening was cut out I also got some reed spline from the same store and I wanted
to just glue this around to create a nice casing and just overall finish off the piece
but as I started to glue it and wrap it around, it snapped, so I had to go in with a new idea
so I actually just grabbed some macrame cording and used three pieces of it and it was a lot
easier, I was easily able to of course wrap this and kind of create a finished edge on
our rattan material, added some hot glue to the bottom there just so that it didn't fray.
Now for the wood top, this is an 18 inch wood round I got at Lowe's, but the thing is it
doesn't fit properly on top but it almost does, so I marked exactly where all four sides
where I needed to kind of dremel out a small piece of the wood and I did that all the way
around the table there.
As you can see it's just so close to fitting but sadly it didn't fit.
So I just used a dremel which I'm very excited I finally got to use this, I've had it for
a while and I dremeled out some small sections, it was super easy, I love this tool and it
just slipped right in to our side table there and that's going to be the top of our table.
So now we're going to go ahead and just start wrapping the cane material around to figure
out where or how tall I want this to go and once you figure out the height that you want
for your rattan, just cut it off and the great thing about rattan is it's kind of like a
grid so you can just cut it on the grid, you don't have to use any rulers or anything and
I figured out where I wanted that to go and then I decided to finish off the top and bottom
edges before applying it and I just went ahead and used this 5 eighth inch wood piece.
I don't exactly know what this is used for, I actually think it might be for weaving baskets
honestly so I glued that on the top and bottom there and then I slipped it in and the great
thing is that the actual legs of the table hold it inside but the tray at the bottom
is what gives it that rounded shape so I'm just wrapping it around and the rattan itself
of course is pretty sturdy so it's going to stand upright and I just glued this to the
bottom of the tray there and then on the back side I went ahead and cut down the middle
of the back so that we could create a seam and I'm going to finish that off with some
of that same wood material we used on the top and bottom.
That material is actually really nice, it gives you a nice clean finish and overall
just makes the rattan look like it was woven for the piece as opposed to like you making
it for the piece.
So I glued this strip down the back side and I also added one on the inside as well just
so you couldn't see that glue or any of those raw edges on the inside and the final step
was to add a finish.
Now you can go ahead and stain the top of the wood if you want to or paint it but I
just wanted to give it a clear coat because I like how the wood matched the cane so I
just felt like it was pretty cohesive and this is how the finished pet home turned out.
And those were all the projects in today's DIYing Your DMs episode.
If you would like to potentially have yours featured in a new episode make sure to head
over and follow me over on Instagram and TikTok both of lonefoxhome and you can DM me absolutely
any ideas you have.
I always go through my DMs and save projects and screenshot them if I see them so you might
see them in a later video as well but this video was definitely jam-packed so I'll let
you guys get on your way.
If you are not already make sure to subscribe to the Lone Fox channel that way you don't
miss any videos.
I post brand new home decor and DIY content every single week along with Instagram and
TikTok.
And guys, last but not least, do not forget to vote for Lone Fox for the Webby Award.
I will leave the link at the top of the description box below.
It's super simple to vote and I would appreciate it so much you guys.
I think we got this.
Very excited.
I'll catch you guys in my next one.
Bye everyone!