Ep 66 Break Test Wallspreaders

Cine Eye
59 followers
3 Video Views·Dec 20, 2022
This episode of Grip Tips has been brought to you by M Squared Studio, and if you'd like to help out the channel,
you can visit my Patreon page. I'll leave a link in the description below.
We're back. We're back. I'm Dave Donaldson. Welcome to Grip Tips. Before I go into my episode,
I just wanted to say real quickly how grateful and thankful I am of the people who actually bought a t-shirt.
That not only supports the channel, but that also supports me, and I really appreciate that.
I especially like this new trend that's happening right now where people are
sending up like a peace sign selfie with their shirt.
I might actually change like the product photos that I have on the website for that, and I thought that it was just
really cool that it's kind of catching on.
So if you bought a t-shirt and it's on its way right now,
I would really like to keep that going.
It's something that I'd like to post on my Instagram to be quite honest,
just all the people who have bought a shirt with a peace sign selfie.
So if you have bought a shirt and you're wondering how to submit to me, you can do that at
griptipsfilm at gmail.com. If you don't know where to buy a shirt,
I think you guys probably know by now. It's at
www.griptips.net.
That's my website. I have ladies and men's, black or gray, doesn't matter.
But to kind of reiterate back to the peace sign selfie thing, if that's not something that you want to do,
I will also accept this because I thought that this was just amazing.
You can do what the VP of Matthew's Studio Equipment did, Tyler Phillips. He went complete man horse with it.
So I would love to see a lot more of these.
Either Photoshop or peace sign selfie.
It's just awesome. And I just want to say thank you and I appreciate it.
All right, now that I've gotten that out of the way, let's move into today's episode.
Every wall spreader episode that I've put out there has a comment somewhere in there that says
how much weight can I put on this safely?
And that's a very good question because to be quite honest, I don't really know.
There's actually no specs
on any of these wall spreaders that I've bought that actually say how much weight you're supposed to put on them.
And that brings us to today's episode when we break a couple of wall spreaders.
Now my roommate Sean and I went out to our garage and tested the 2x4 wall spreader and the telescoping wall spreader.
I didn't do the coupled wall spreader for this test because I, number one,
cut my pipes too short like an idiot. And two, when I think about it,
it's really about how fast I can put up a wall spreader. And since the telescoping method kind of wins that competition,
I just wanted to see how that would stack up against a 2x4
as my initial guess was that the 2x4 would probably hold more weight.
I had to do a little prep as I wanted the pipe reducer for the telescoping version to sit in the middle for my test.
So I first cut a four-foot piece of speed rail so that I could make that happen.
And then Sean and I mounted the wall spreader to the walls.
And I counted how many times I spun the nut on the jack side
so that when I get to the 2x4 version, I can try to apply the same amount of pressure.
And if that's kind of confusing, don't worry. I'm going to revisit that in a second.
This took nine full turns on the nut for the wall spreader to stay in place and withstand a shake test.
From there, we started staggering sandbags on the very middle of the spreader until it finally collapsed.
It's not coming off the wall.
Do you want to call that definitive, or?
It's got a break.
So don't go crazy. Just lay it up.
And if it starts to move on you, move away.
Move away. Move away.
This finally collapsed at six sandbags, and with each sandbag weighing 35 pounds, that means it collapsed at 210 pounds.
It wasn't the middle that actually broke, though.
It was the pancake that slipped off of the wall, and though my pipe had gotten completely bent,
it was the initial impact of all the bags slamming up against the side of the pipe once the other side hit the ground.
Now that was able to handle 210 pounds. That's the telescoping wall spreader. Let's move on to the 2x4 version.
We first cut our 2x4 to get it to the length that we needed in order to spread,
and then mount it to the same spot against the same studs on the walls.
Now, let's revisit the jack side so I can better explain what I was trying to say earlier.
I basically spun the nut on both versions until the nut just barely touched the speed rail or 2x4 mount.
I made sure that the threads on both jacks were the same, and as you can see here, they line up,
so they are, and it took me nine turns on the telescoping version,
so I made sure that the 2x4 version would also receive the same nine full turns, and that again
was just my way of trying to get about the exact same amount of pressure for both versions.
And I mean, it's not the best way to try and figure out the exact same amount of pressure,
but I felt like this was the easiest way to get it close.
Then from there, we started staggering bags again on the middle point until it would collapse.
I was actually kind of surprised by this.
I would have thought that the 2x4 version would have held more,
but it just barely got five bags on it before it failed.
That's only 175 pounds, and again, not completely the 2x4's fault, as this also slipped off of the wall,
and the bag's kind of karate chopped the 2x4 in half. So we have 210 pounds for the telescoping version,
and then we have 175 pounds for the 2x4.
So now, what is that really telling us? We can put almost 200 pounds on our wall spreaders, right? Wrong.
We have to go back and think about what we learned from sash cords.
In the sash cord episodes, you saw that one of them could actually hold 500 pounds as its tensile strength,
but the max working load that was suggested, or the suggested working load, was always 80% less than that.
And I think that we need to apply that here.
So if our wall spreaders are starting to slip off of the wall at roughly 200 pounds,
I know it's like 175 and 210, but I'm just trying to find like a nice round number.
80% less than that is 40 pounds. So no more than that.
Let me see if I can do this math real quick, and I'm just improvising, but that's like having four mafer clamps,
four gobo arms with knuckles, a 4x floppy,
maybe two 1ks,
and a frame. But that's about 40 pounds right there. That's a lot of stuff, and even for camera,
that's a lot of stuff. You know, camera, most cameras, especially if you're in the independent field,
I mean, I'm shooting off of a 5D Mark III right now. With this 5D Mark III, the whole body, including the lens,
it's not even close to 40 pounds. It's like seven.
So that actually is a lot of weight if you really think about it.
So don't go ahead and test over 40 pounds. Just stay around 40 pounds with any wall spreader.
I'm honestly just giving this my review from what I learned from doing it.
So I hope that this is helping a few of you.
But yeah, no more than 40 pounds. When it comes to your G&E rental house needs, M Squared Studios,
not only that, but they're also an insert stage located in Parsippany, New Jersey. Within the Manhattan zone,
and just 30 minutes from Midtown, the studio offers discounted or free delivery rates for your production.
Actually, currently, if you book through them today or within the next six months,
today, if you book with them in the next six months,
you can actually get 20% off of your rental. All you have to do
when you contact them and you get your rental quote, you just have to mention Grip Tips,
and they'll automatically bump 20% off.
So I'm just trying to help you out. This is only valid for the next six months.
So if you're thinking about renting some gear and you're within that area, I would even say if you're within
an hour and a half to two hours, I would take advantage of that. 20% off
of all of the gear that you want. I mean, maybe you're an independent filmmaker.
Maybe you need to get your hands dirty on something. Yes, 20% off. For the next six months,
all you have to do is mention Grip Tips.
If you're
looking to contact them to get a rental quote, or maybe you want to talk about what we talked about on the episode today,
all you have to do is go to their website and start booking now at
www.msquaredstudio.tv. Sadly, that is all that I have for you guys today.
If you like today's episode, please let me know in the comment section below.
You can also follow me on my Twitter right here. Don't forget to do that Instagram selfie with the new t-shirts.
www.griptips.net. Don't forget to hit that subscribe button. Don't forget to put on your socks.
Don't forget to put on... don't forget to eat Wheaties
and...
and... and... and care for everybody.
Bitch.
