Tommy's Trade Secrets - Drilling and Fixing Advice

Magical Mirrors
232 followers
3 Video Views·Nov 17, 2022
Hi, welcome to Tommy's Trade Secrets. This short clip is all about handyman jobs and how to do
them right, so I hope you find it useful. Take a look at the step-by-step guide and if you like it,
print it, keep it and use it. Hi I'm Andy from tradesuitmarket.com and today I'm going to show
you how to make a proper fixing into a brick wall using the right screws, raw plug and drill bit
The basic error people make normally is they've drilled their wall out with a 10mm drill bit,
they've put their raw plug in, they won't have the screw that's compatible to that raw plug.
When they go to screw that screw into the raw plug, they'll find that the raw plug just spins
and spins. So always make sure that the materials that you're using are compatible with each other.
The basic procedure for getting the right screw with the right raw plug with the right drill bit
is obviously choose your screw first and today I'm going to use an inch and a half 10mm. Obviously I
know that my inch and a half 10mm screw will go with the raw plugs that I've selected today
and I can use a size 8mm, a size 10mm, a size 12mm or a size 14mm raw plug with these particular
screws and then the drill bit that I need for this is obviously a 7mm drill bit. So the basic
rule is screws first, make sure they're the right length, the right size and they are compatible
with the raw plug and the raw plug is compatible with the drill bit. Right now that we're happy
that we've got our correct screw with our correct raw plug and our correct drill, what we're going
to do is get our drill bit, just a little tip for you and then we get our screw and we place the
screw on the side of our masonry bit and just mark this with a pencil and as we've marked that what
we do is just get a little tiny bit of tape and we place that around our pencil mark and just draw
that round like so, just pull that off and that indicates the depth that I really do need to go
into the wall. I don't want to go too deep or I don't want to go too shallow, obviously if I go
too shallow when I go and put my raw plug in and draw my screw in, once the screw hits the back
side of the wall it'll pull the raw plug out so I know that I'm going the correct depth into the wall.
So what I do is get my drill bit and get my drill, get my drill driver, obviously again because I'm
going into block work or into brick work I've actually got the hammer action on this drill
so I just send it to the hammer action and then again I'm just going to drill our wall today,
obviously make sure that you've got no electrical sockets below because sometimes
electrical cables can run up a wall and you don't want to go through an electrical cable
so I'm going to say my location is about there so I've looked below, no electrical sockets around
anywhere so just start drilling the wall out, take it down to my tape, that's the depth I want to go,
pull the drill bit out and get my my screw that I'm going to use today and obviously
my raw plug which is compatible with it. I'm going to place that into the wall,
what you do is just hammer that home so it's nice and flush and then just get a posi screwdriver,
this is obviously a pz2 bit that I'm going to use on this screwdriver and it's compatible with
this screw so I'm just going to place the screw into the raw plug and just tighten it up and as
you can see that that raw plug is not spinning at all and that connection actually made into that
raw plug into that raw plug is really nice and secure and that's what you want. If you go to
tradesupermarket.com you'll see we've put your compatible package together which consists of
a box of screws, the right raw plugs, the right drill bit and the right p2z screwdriver.
Thanks very much for watching today so stay tuned for more of Tommy's Trade Secrets.
I hope you found that useful, now click below to find all the tools and materials you need for the
job. There are products from loads of merchants all at the cheapest prices on the web. Thanks
very much for watching Tommy's Trade Secrets. Oh, would you mind rating this video and spread the word.
