Tommy's Trade Secrets - How To Paint Fresh Plaster

Magical Mirrors
232 followers
3 Video Views·Nov 17, 2022
Hi and welcome to Tommy's Trade Secrets. This short clip is all about painting and how to do it right
so hopefully you'll find it useful. Take a look at the step-by-step guide and if you like it,
print it, keep it and use it. Hi my name's Simon from tradesupermarket.com and as a builder the
most frequent question I get asked is what to do once we've got our freshly plastered walls.
So today I'm going to teach you how to paint and seal a freshly plastered wall.
Okay so the tools and materials you'll need today are some paint, white preferably, a paintbrush,
something to mix your paint up with your water, some dust sheets, a large paint kettle or a paint
tray and a roller. Right okay, my mum always told me there's more than two ways to string a cap,
so the same method applies when sealing a new plaster. There's several different techniques
you can use. One of them is PVA, mix it at a 5.1 ratio with some water. Now I don't really like
sometimes if you get any drips or runs it's a right nightmare to sand out. Now the other technique
is to buy some of the new paint that's on the market which is designed especially for fresh
plaster but I think it's a bit expensive so I'm going to show you an alternative which is what
I've always used and it works. So what I'm going to do is get our paint and knock it up 50-50
roughly with some water. So you want to tip a bit of your paint kettle. If it decides to come out
you don't have to be spot on with your 50-50 but as long as you're roughly there
you're okay. Right okay so we've got our water and our paint in there so I'm just going to mix it up
with a whisk attached to my drill. So we get a nice consistency. Okay so painting can be messy
at the best of times but now we've added water to the mix it's going to be even more messier
so you're best off getting yourself either a polythene dust sheet or a cotton dust sheet
to cover up all your valuables, your sofa etc. Okay so first things first we're going to want
this is also known as cutting in. You're going to want to work it right into the plaster but now
it's time to use a roller. So you want to load it up quite the same as brushing you want to work it
right into the plaster going over it about two or three times. What I always do as well is just
give it one quick final sort of go and that stops any runs or drips. So just keep repeating this for
the whole wall. Okay so I'll probably be dry in about 10 minutes because it's new plaster but
better to be safe than sorry and leave it for an hour and then you're ready for your top coat to
recover. Right okay so that's it I've freshly plastered the walls all painted and sealed now
so it's time for you to do it yourself. Remember that all tools and materials I use can be bought
from Tradesupermarket.com so remember stay tuned for more Tommy's Trade Secrets. I hope you found
that useful now click below to find all the tools and materials you need for the job.
There are products from loads of merchants all at the cheapest prices on the web.
Thanks very much for watching Tommy's Trade Secrets. Oh would you mind rating this video?
And spread the word.
